This prevents a panic where we synthesize a new netmap in
setClientStatus after we've shut down and nil'd out the controlclient,
since that function expects to be called while connected to control.
Fixes#7392
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib631eb90f34f6afa008d69bbb386f70da145e102
Conforms to RFC 1929.
To support Java HTTP clients via libtailscale, who offer no other
reliable hooks into their sockets.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
No ListenPacket support yet, but Listen with a udp network type fit
easier into netstack's model to start.
Then added an example of using it to cmd/sniproxy with a little udp
:53 handler.
No tests in tsnet yet because we don't have support for dialing over
UDP in tsnet yet. When that's done, a new test can test both sides.
Updates #5871
Updates #1748
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This ensures that any mappings that are created are correctly cleaned
up, instead of waiting for them to expire in the router.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I436248ee7740eded6d8adae5df525e785a8f7ccb
Per a packet capture provided, some gateways will reply to a UPnP
discovery packet with a UDP packet with a source port that does not come
from the UPnP port. Accept these packets with a log message.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5d4d5b2a0275009ed60f15c20b484fe2025d094b
We were previously sending a lower-case "udp" protocol, whereas other
implementations like miniupnp send an upper-case "UDP" protocol. For
compatibility, use an upper-case protocol instead.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4aed204f94e4d51b7a256d29917af1536cb1b70f
Some devices don't let you UPnP portmap a port below 1024, so let's just
avoid that range of ports entirely.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib7603b1c9a019162cdc4fa21744a2cae48bb1d86
Return a mock set of interfaces and a mock gateway during this test and
verify that LikelyHomeRouterIP returns the outcome we expect. Also
verify that we return an error if there are no IPv4 addresses available.
Follow-up to #7447
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f06989e7f1f0bebd108861cbff17b820ed2e6e4
We have many function pointers that we replace for the duration of test and
restore it on test completion, add method to do that.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We weren't filtering out IPv6 addresses from this function, so we could
be returning an IPv4 gateway IP and an IPv6 self IP. Per the function
comments, only return IPv4 addresses for the self IP.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If19a4aadc343fbd4383fc5290befa0eff006799e
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
WSL has started to set the eth0 default route interface default to 1280
MTU, which is too low to carry 1280 byte packets from tailscale0 once
wrapped in WireGuard. The change down to 1280 is very likely smaller
than necessary for almost all users. We can not easily determine the
ideal MTU, but if all the preconditions match, we raise the MTU to 1360,
which is just enough for Tailscale traffic to work.
Updates #4833
Updates #7346
Signed-off-by: James Tucker <james@tailscale.com>
This is to address a possible DNS failure on startup. Before this
change IPv6 addresses would be listed first, and the client dialer would
fail for hosts without IPv6 connectivity.
This ensures that we're trying multiple returned IPs, since the DERP
servers return the same response to all queries. This should increase
the chances that we eventually reach a working IP.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie8d4fb93df96da910fae49ae71bf3e402b9fdecc
Update API documentation to include explanation of resources, a cleaner and more consistent structure, updated terminology, and fixes to a few errors and omissions.
Signed-off-by: Julia Stein <julia@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Will Norris <will@tailscale.com>
Share the same underlying implementation for both PrivateID and PublicID.
For the shared methods, declare them in the same order.
Only keep documentation on methods without obvious meaning.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We had two implemenetations of the kube client, merge them.
containerboot was also using a raw http.Transport, this also has
the side effect of making it use a http.Client
Signed-off-by: Maisem Ali <maisem@tailscale.com>
By default, cmd/dist only prints the output of failed commands.
With this, you can turn all the noisy output back on.
Updates tailscale/corp#9045
Signed-off-by: David Anderson <danderson@tailscale.com>
The helper suppresses output if the command runs successfully. If the
command fails, it dumps the buffered output to stdout before returning
the error. This means the happy path isn't swamped by debug noise or
xcode being intensely verbose about what kind of day it's having,
but you still get debug output when something goes wrong.
Updates tailscale/corp#9045
Signed-off-by: David Anderson <danderson@tailscale.com>
Given recent changes in corp, I originally thought we could remove all of the
syso files, but then I realized that we still need them so that binaries built
purely from OSS (without going through corp) will still receive a manifest.
We can remove the arm32 one though, since we don't support 32-bit ARM on Windows.
Updates https://github.com/tailscale/corp/issues/9576
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the k8s operator to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates tsconnect to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the linux cli to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Ever since the introduction of the "must" package,
most MustXXX functions are no longer necessary.
Remove this as it is no longer depended upon
from within this repository and by the internal private repository.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
It turns out even with an AuthKey that pre-approves devices on a tailnet
with machine auth turned on, we still temporarily see the
NeedsMachineAuth state. So remove that error (for now).
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
This is for use by LocalAPI clients written in other languages that
don't appear to be able to talk HTTP over a socket (e.g.
java.net.http.HttpClient).
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
This allows us to differentiate between the various tsnet apps that
we have like `golinks` and `k8s-operator`.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Exposes the delegated interface data added by #7248 in the debug
endpoint. I would have found it useful when working on that PR, and
it may be handy in the future as well.
Also makes the interfaces table slightly easier to parse by adding
borders to it. To make then nicer-looking, the CSP was relaxed to allow
inline styles.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
