gitops-pusher supports authenticating with an API key or OAuth
credentials (added in #7393). You shouldn't ever use both of those
together, so we error if both are set.
In tailscale/gitops-acl-action#24, OAuth support is being added to the
GitHub action. In that environment, both the TS_API_KEY and OAuth
variables will be set, even if they are empty values. This causes an
error in gitops-pusher which expects only one to be set.
Update gitops-pusher to check that only one set of environment variables
are non-empty, rather than just checking if they are set.
Updates #7393
Signed-off-by: Will Norris <will@tailscale.com>
When running as non-root non-operator user, you get this error:
```
$ tailscale serve 8080
Access denied: watch IPN bus access denied, must set ipn.NotifyNoPrivateKeys when not running as admin/root or operator
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
It should fail, but the error message is confusing.
With this fix:
```
$ tailscale serve 8080
sending serve config: Access denied: serve config denied
Use 'sudo tailscale serve 8080' or 'tailscale up --operator=$USER' to not require root.
```
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Do not provision resources for a tailscale Ingress that has no valid backends.
Updates tailscale/tailscale#10910
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are
available at:
http://localhost:12345/debug/metrics
Updates #8210
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8
If there are routes changes as a side effect of an app connector
configuration update, the connector configuration may want to reenter a
lock, so must be started asynchronously.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
This is a useful primitive for asynchronous execution of ordered work I
want to use in another change.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
To reduce the likelihood of breaking users,
if we implement stricter Exact path type matching in the future.
Updates tailscale/tailscale#10730
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy: deploy a Tailscale IngressClass resource.
Some Ingress validating webhooks reject Ingresses with
.spec.ingressClassName for which there is no matching IngressClass.
Additionally, validate that the expected IngressClass is present,
when parsing a tailscale `Ingress`.
We currently do not utilize the IngressClass,
however we might in the future at which point
we might start requiring that the right class
for this controller instance actually exists.
Updates tailscale/tailscale#10820
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
This change adds a description to the exit-node CLI command. This
description will be displayed when using `tailscale -h` and `tailscale
exit-node -h`.
Fixes#10787
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
The configuration knob (that defaulted to Connector being disabled)
was added largely because the Connector CRD had to be installed in a separate step.
Now when the CRD has been added to both chart and static manifest, we can have it on by default.
Updates tailscale/tailscale#10878
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: fix base truncating for extra long Service names
StatefulSet names for ingress/egress proxies are calculated
using Kubernetes name generator and the parent resource name
as a base.
The name generator also cuts the base, but has a higher max cap.
This commit fixes a bug where, if we get a shortened base back
from the generator, we cut off too little as the base that we
have cut will be passed into the generator again, which will
then itself cut less because the base is shorter- so we end up
with a too long name again.
Updates tailscale/tailscale#10807
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbekrm@gmail.com>
cmd/k8s-operator: add CRD to chart and static manifest
Add functionality to insert CRD to chart at package time.
Insert CRD to static manifests as this is where they are currently consumed from.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Prints a helpful message with the web UI's address when running
tailscale set --webclient.
Updates tailscale/corp#16345
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Removes the avoidFinalRename logic and all associated code as it is no longer required by the Apple clients.
Enables resume logic to be usable for Apple clients.
Fixestailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
The prefix has space for 32-bit site IDs, but the validateViaPrefix
function would previously have disallowed site IDs greater than 255.
Fixestailscale/corp#16470
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4cdb0711dafb577fae72d86c4014cf623fa538ef
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Add a standalone server for STUN that can be hosted independently of the
derper, and factor that back into the derper.
Fixes#8434Closes#8435Closes#10745
Signed-off-by: James Tucker <james@tailscale.com>
* cmd/containerboot: optionally configure tailscaled with a configfile.
If EXPERIMENTAL_TS_CONFIGFILE_PATH env var is set,
only run tailscaled with the provided config file.
Do not run 'tailscale up' or 'tailscale set'.
* cmd/containerboot: store containerboot accept_dns val in bool pointer
So that we can distinguish between the value being set to
false explicitly bs being unset.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Unlike most prefs, the ControlURL policy needs to take effect before
login. This resolves an issue where on first start, even when the
ControlURL policy is set, it will generate a login URL to the Tailscale
SaaS server.
Updates tailscale/coral#118
Fixes#10736
Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This command allows observing whether a given dialer ("SystemDial",
"UserDial", etc.) will successfully obtain a connection to a provided
host, from inside tailscaled itself. This is intended to help debug a
variety of issues from subnet routers to split DNS setups.
Updates #9619
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie01ebb5469d3e287eac633ff656783960f697b84
This tripped me up when I was testing something and wrote:
if conn != nil {
conn.Close()
}
In netstack mode, when an error occurred we were getting a non-nil error
and a non-nil interface that contained a nil pointer. Instead, just
return a nil interface value.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id9ef3dd24529e0e8c53adc60ed914c31fbb10cc4
A Tailnet node can be told to stop advertise subnets by passing
an empty string to --advertise-routes flag.
Respect an explicitly passed empty value to TS_ROUTES env var
so that users have a way to stop containerboot acting as a subnet
router without recreating it.
Distinguish between TS_ROUTES being unset and empty.
Updates tailscale/tailscale#10708
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The service is only used as a watchdog and for piping logs from the child
process. We shouldn't be creating a network monitor in that case.
Fixes#10732
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Instead of taking the first UPnP response we receive and using that to
create port mappings, store all received UPnP responses, sort and
deduplicate them, and then try all of them to obtain an external
address.
Updates #10602
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f
connector-gen can initially generate connector ACL snippets and
advertise-routes flags for Github and AWS based on their public IP /
domain data.
Updates ENG-2425
Signed-off-by: James Tucker <james@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This uses the fact that we've received a frame from a given DERP region
within a certain time as a signal that the region is stil present (and
thus can still be a node's PreferredDERP / home region) even if we don't
get a STUN response from that region during a netcheck.
This should help avoid DERP flaps that occur due to losing STUN probes
while still having a valid and active TCP connection to the DERP server.
RELNOTE=Reduce home DERP flapping when there's still an active connection
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If7da6312581e1d434d5c0811697319c621e187a0
Initial implementation of a `tailscale whois` subcommand
which allows users to observe metadata associated with a
Tailscale IP. It also has a `--json` flag to allow consumption
programmatically.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously were always setting `UseSocketOnly` because we were
comparing `args.socketpath != ""`, but `args.socketpath` flag
always gets filled with `paths.DefaultTailscaledSocket()` when
not provided. Rather than comparing to the empty string, compare
to the default value to determine if `UseSocketOnly` should be
set.
Should fix issue with web client being unreachable for Mac App
Store variant of the mac build.
Updates #16054
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Instead of overloading the Version field, add an explicit Track field.
This fixes a bug where passing a track name in `args.Version` would keep
the track name in `updater.Version` and pass it down the code path to
commands like `apt-get install`. Now, `updater.Version` should always be
a version (or empty string).
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
`tailscaled` and `tailscale` expect the socket to be at
`/var/run/tailscale/tailscaled.sock`, however containerboot
would set up the socket at `/tmp/tailscaled.sock`. This leads to a
poor UX when users try to use any `tailscale` command as they
have to prefix everything with `--socket /tmp/tailscaled.sock`.
To improve the UX, this adds a symlink to
`/var/run/tailscale/tailscaled.sock` to point to `/tmp/tailscaled.sock`.
This approach has two benefits, 1 users are able to continue to use
existing scripts without this being a breaking change. 2. users are
able to use the `tailscale` CLI without having to add the `--socket` flag.
Fixes tailscale/corp#15902
Fixes#6849Fixes#10027
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Some fields if `ipn.Prefs` are structs. `ipn.MaskedPrefs` has a single
level of boolean `*Set` flags, which doesn't map well to nested structs
within `ipn.Prefs`.
Change `MaskedPrefs` and `ApplyEdits` to support `FooSet` struct fields
that map to a nested struct of `ipn.Prefs` like `AutoUpdates`. Each
struct field in `MaskedPrefs` is just a bundle of more `Set` bool fields
or other structs. This allows you to have a `Set` flag for any
arbitrarily-nested field of `ipn.Prefs`.
Also, make `ApplyEdits` match fields between `Prefs` and `MaskedPrefs`
by name instead of order, to make it a bit less finicky. It's probably
slower but `ipn.ApplyEdits` should not be in any hot path.
As a result, `AutoUpdate.Check` and `AutoUpdate.Apply` fields don't
clobber each other when set individually.
Updates #16247
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Precompress webclient assets with precompress util. This cuts our
css and js build sizes to about 1/3 of non-compressed size. Similar
compression done on tsconnect and adminhttp assets.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* cmd/k8s-operator: generate static manifests from Helm charts
This is done to ensure that there is a single source of truth
for the operator kube manifests.
Also adds linux node selector to the static manifests as
this was added as a default to the Helm chart.
Static manifests can now be generated by running
`go generate tailscale.com/cmd/k8s-operator`.
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The recent addition of RequestID was only populated if the
HTTP Request had returned an error. This meant that the underlying
handler has no access to this request id and any logs it may have
emitted were impossible to correlate to that request id. Therefore,
this PR adds a middleware to generate request ids and pass them
through the request context. The tsweb.StdHandler automatically
populates this request id if the middleware is being used. Finally,
inner handlers can use the context to retrieve that same request id
and use it so that all logs and events can be correlated.
Updates #2549
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Adds policy keys ExitNodeID and ExitNodeIP.
Uses the policy keys to determine the exit node in preferences.
Fixestailscale/corp#15683
Signed-off-by: Claire Wang <claire@tailscale.com>
To be consistent with the formatting of other warnings, pass available
update health message instead of handling ClientVersion in he CLI.
Fixes#10312
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Enforcing inclusion of our OSS license at the top of .ts and .tsx
files. Also updates any relevant files in the repo that were
previously missing the license comment. An additional `@license`
comment is added to client/web/src/index.tsx to preserve the
license in generated Javascript.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We warn users about IP forwarding being disabled when using
`--avertise-routes` in `tailscale up`, this adds the same warnings
to `tailscale set`.
Updates tailscale/corp#9968
Signed-off-by: Jenny Zhang <jz@tailscale.com>
* cmd/containerboot: proxy traffic to tailnet target defined by FQDN
Add a new Service annotation tailscale.com/tailnet-fqdn that
users can use to specify a tailnet target for which
an egress proxy should be deployed in the cluster.
Updates tailscale/tailscale#10280
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This records test coverage for the amd64 no race tests and uploads the
results to coveralls.io.
Updates #cleanup
Signed-off-by: Ox Cart <ox.to.a.cart@gmail.com>
Kubernetes can generate StatefulSet names that are too long and result in invalid Pod revision hash label values.
Calculate whether a StatefulSet name generated for a Service or Ingress
will be too long and if so, truncate it.
Updates tailscale/tailscale#10284
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It's possible to do this with a combination of watch-ipn and jq, but looking
at the netmap while debugging is quite common, so it's nice to have a one-shot
command to get it.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
jq doens't like non-json output in the json stream, and works more happily
when the input stream EOFs at some point. Move non-json words to stderr, and
add a parameter to stop watching and exit after some number of objects.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled
clients can use this value to disambiguate fast user switching from one tailnet
to another that are under the same exact login. We will also try to backfill
this information during backend starts and profile switches so that users don't
have to re-authenticate their profile. The first client to use this new
information is the CLI in 'tailscale switch -list' which now uses text/tabwriter
to display the ID, Tailnet, and Account. Since account names are ambiguous, we
allow the user to pass 'tailscale switch ID' to specify the exact tailnet they
want to switch to.
Updates #9286
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
* cmd/containerboot: shut down cleanly on SIGTERM
Make sure that tailscaled watcher returns when
SIGTERM is received and also that it shuts down
before tailscaled exits.
Updates tailscale/tailscale#10090
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.
Updates #3363
Updates tailscale/corp#396
Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that we have nftable support this works fine and force
it on gokrazy since 25a8daf405.
Updates gokrazy/gokrazy#209
Signed-off-by: Maisem Ali <maisem@tailscale.com>
No longer using this! Readonly state fully managed via auth endpoint.
Also getting rid of old Legacy server mode.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
For consistency with the "WebClient" naming of the other functions
here. Also fixed a doc typo.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This PR changes the internal getTokenInfo function to use generics.
I also removed our own implementations for obtaining a token's user
and primary group in favour of calling the ones now available in
x/sys/windows.
Furthermore, I added two new functions for working with tokens, logon
session IDs, and Terminal Services / RDP session IDs.
I modified our privilege enabling code to allow enabling of multiple
privileges via one single function call.
Finally, I added the ProcessImageName function and updated the code in
tailscaled_windows.go to use that instead of directly calling the
underlying API.
All of these changes will be utilized by subsequent PRs pertaining to
this issue.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Now that 1.54 has released, and the new web client will be included in
1.56, we can remove the need for the node capability. This means that
all 1.55 unstable builds, and then eventually the 1.56 build, will work
without setting the node capability.
The web client still requires the "webclient" user pref, so this does
NOT mean that the web client will be on by default for all devices.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This removes the dev/unstable build check for the --webclient flag on
`tailscale set`, so that it will be included in the next major stable
release (1.56)
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This prevents running more than one recursive resolution for the same
hostname in parallel, which can use excessive amounts of CPU when called
in a tight loop. Additionally, add tests that hit the network (when
run with a flag) to test the lookup behaviour.
Updates tailscale/corp#15261
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I39351e1d2a8782dd4c52cb04b3bd982eb651c81e
Causing issues building a stable release. Getting rid of the flag
for now because it was only available in unstable, can still be
turned on through localapi.
A #cleanup
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
`winutil.WTSGetActiveConsoleSessionId` only works for physical desktop
logins and does not return the session ID for RDP logins. We need to
`windows.WTSEnumerateSessions` and find the active session.
Fixes https://github.com/tailscale/corp/issues/15772
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On unix systems, the check involves executing sudo, which is slow.
Instead of doing it for every incoming request, move the logic into
localapi serveServeConfig handler and do it as needed.
Updates tailscale/corp#15405
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This package is a wrapper for os/user that handles non-cgo builds,
gokrazy and user shells.
Updates tailscale/corp#15405
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
If the status request to check for the preview node cap fails,
continue with starting up the legacy client.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
After running `tailscale web`, only disable the user pref if it was not
already previously set.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
In corp PR #14970 I updated the installer to set a security mitigation that
always forces system32 to the front of the Windows dynamic linker's search
path.
Unfortunately there are other products out there that, partying like it's
1995, drop their own, older version of wintun.dll into system32. Since we
look there first, we end up loading that old version.
We can fix this by preloading wintun using a fully-qualified path. When
wintun-go then loads wintun, the dynamic linker will hand it the module
that was previously loaded by us.
Fixes#10023, #10025, #10052
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Updates tailscale/tailscale#9222
plain k8s-operator should have hostinfo.App set to 'k8s-operator', operator with proxy should have it set to 'k8s-operator-proxy'. In proxy mode, we were setting the type after it had already been set to 'k8s-operator'
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
API v1 is compatible with helm v2 and v2 is not.
However, helm v2 (the Tiller deployment mechanism) was deprecated in 2020
and no-one should be using it anymore.
This PR also adds a CI lint test for helm chart
Updates tailscale/tailscale#9222
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The derphttp client automatically reconnects upon failure.
RunWatchConnectionLoop called derphttp.Client.WatchConnectionChanges
once, but that wrapper method called the underlying
derp.Client.WatchConnectionChanges exactly once on derphttp.Client's
currently active connection. If there's a failure, we need to re-subscribe
upon all reconnections.
This removes the derphttp.Client.WatchConnectionChanges method, which
was basically impossible to use correctly, and changes it to be a
boolean field on derphttp.Client alongside MeshKey and IsProber. Then
it moves the call to the underlying derp.Client.WatchConnectionChanges
to derphttp's client connection code, so it's resubscribed on any
reconnect.
Some paranoia is then added to make sure people hold the API right,
not calling derphttp.Client.RunWatchConnectionLoop on an
already-started Client without having set the bool to true. (But still
auto-setting it to true if that's the first method that's been called
on that derphttp.Client, as is commonly the case, and prevents
existing code from breaking)
Fixestailscale/corp#9916
Supercedes tailscale/tailscale#9719
Co-authored-by: Val <valerie@tailscale.com>
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
* Implement missing tests for sniproxy
* Wire sniproxy to new appc package
* Add support to tsnet for routing subnet router traffic into netstack, so it can be handled
Updates: https://github.com/tailscale/corp/issues/15038
Signed-off-by: Tom DNetto <tom@tailscale.com>
This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We were inconsistent whether we checked if the feature was already
enabled which we could do cheaply using the locally available status.
We would do the checks fine if we were turning on funnel, but not serve.
This moves the cap checks down into enableFeatureInteractive so that
are always run.
Updates #9984
Co-authored-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We prevent shodow configs when starting a foreground when a background serve config already exists for the serve type and port. This PR improves the messaging to let the user know how to remove the previous config.
Updates #8489
ENG-2314
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
The `--http` flag can not be used with Funnel, so we should remove it to remove confusion.
Updates #8489
ENG-2316
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR changes the -https, -http, -tcp, and -tls-terminated-tcp
flags from string to int and also updates the validation to ensure
they fit the uint16 size as the flag library does not have a Uint16Var
method.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The TestServeDevConfigMutations test has 63 steps that all run
under the same scope. This tests breaks them out into isolated
subtests that can be run independently.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We currently print out "run tailscale serve --help" when the subcmd
might be funnel. This PR ensures the right subcmd is passed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
On `tailscale set --auto-update`, set the Sparkle plist option for it.
Also make macsys report not supporting auto-updates over c2n, since they
will be triggered by Sparkle locally.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
A few people have run into issues with understanding why `--set-path` started in background mode, and/or why they couldn't use a path in foreground mode. This change allows `--set-path` to be used in either case (foreground or background).
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
clientupdate.Updater will have a non-nil Update func in a few cases
where it doesn't actually perform an update:
* on Arch-like distros, where it prints instructions on how to update
* on macOS app store version, where it opens the app store page
Add a new clientupdate.Arguments field to cause NewUpdater to fail when
we hit one of these cases. This results in c2n updates being "not
supported" and `tailscale set --auto-update` returning an error.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* Fixes issue with template string not being provided in help text
* Updates background information to provide full URL, including path, to make it clear the source and destination
* Restores some tests
* Removes AllowFunnel in ServeConfig if no proxy exists for that port.
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR adds the same set-raw from the old flow into the new one
so that users can continue to use it when transitioning into the new
flow.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR fixes the isLegacyInvocation to better catch serve and
funnel legacy commands. In addition, it now also returns a string
that translates the old command into the new one so that users
can have an easier transition story.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR allows you to do "tailscale serve -bg -https:4545 off" and it
will delete all handlers under it. It will also prompt you for a y/n in case
you wanted to delete a single port.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Users should delete proxies by deleting or modifying the k8s cluster resources
that they used to tell the operator to create they proxy. With this flow,
the tailscale operator will delete the associated device from the control.
However, in some cases users might have already deleted the device from the control manually.
Updates tailscale/tailscale#9773
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We no longer build Windows releases with cgo enabled, which
automatically turned off certstore support. Rather than re-enabling cgo,
we updated our fork of the certstore package to no longer require cgo.
This updates the package, cleans up how the feature is configured, and
removes the cgo build tag requirement.
Fixestailscale/corp#14797Fixestailscale/coral#118
Change-Id: Iaea34340761c0431d759370532c16a48c0913374
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
In the sandboxed app from the app store, we cannot check
`/Library/Preferences/com.apple.commerce.plist` or run `softwareupdate`.
We can at most print a helpful message and open the app store page.
Also, reenable macsys update function to mark it as supporting c2n
updates. macsys support in `tailscale update` was fixed.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The progress printer was buggy where it would not print correctly
and some of the truncation logic was faulty.
The progress printer now prints something like:
go1.21.3.linux-amd64.tar.gz 21.53MiB 13.83MiB/s 33.88% ETA 00:00:03
where it shows
* the number of bytes transferred so far
* the rate of bytes transferred
(using a 1-second half-life for an exponentially weighted average)
* the progress made as a percentage
* the estimated time
(as calculated from the rate of bytes transferred)
Other changes:
* It now correctly prints the progress for very small files
* It prints at a faster rate (4Hz instead of 1Hz)
* It uses IEC units for byte quantities
(to avoid ambiguities of "kb" being kilobits or kilobytes)
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The `serve` command for TCP has always required the scheme of the target to be specified. However, when it's omitted the error message reported is misleading
```
error: failed to apply TCP serve: invalid TCP target "localhost:5900": missing port in address
```
Since we know the target is TCP, we shouldn't require it to be specified. This aligns with the changes for HTTP proxies in https://github.com/tailscale/tailscale/issues/8489closes#9855
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
The `off` subcommand removes a serve/funnel for the corresponding type and port. Previously, we were not providing this which would result in an error if someone was using something than the default https=443.
closes#9858
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
It's required as of the recent 5297bd2cff.
Updates #7894
Updates #9394 (sure would be nice)
Change-Id: Id6672408dd8a6c82dba71022c8763e589d789fcd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/k8s-operator: users can configure operator to set firewall mode for proxies
Users can now pass PROXY_FIREWALL_MODE={nftables,auto,iptables} to operator to make it create ingress/egress proxies with that firewall mode
Also makes sure that if an invalid firewall mode gets configured, the operator will not start provisioning proxy resources, but will instead log an error and write an error event to the related Service.
Updates tailscale/tailscale#9310
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The change is being kept to a minimum to make a revert easy if necessary. After the release, we will go back for a final cleanup.
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Previously we were just smushing together args and not trying
to parse the values at all. This resulted in the args to testwrapper
being limited and confusing.
This makes it so that testwrapper parses flags in the exact format as `go test`
command and passes them down in the provided order. It uses tesing.Init to
register flags that `go test` understands, however those are not the only
flags understood by `go test` (such as `-exec`) so we register these separately.
Updates tailscale/corp#14975
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This partially reverts commits a61a9ab087
and 7538f38671 and fully reverts
4823a7e591.
The goal of that commit was to reapply known config whenever the
container restarts. However, that already happens when TS_AUTH_ONCE was
false (the default back then). So we only had to selectively reapply the
config if TS_AUTH_ONCE is true, this does exactly that.
This is a little sad that we have to revert to `tailscale up`, but it
fixes the backwards incompatibility problem.
Updates tailscale/tailscale#9539
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change:
* adds a partial files peerAPI endpoint to get a list of partial files
* adds a helper function to extract the basename of a file
* updates the peer put peerAPI endpoint
* updates the file put localapi endpoint to allow resume functionality
Updates #14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
We were too strict and required the user not specify the host field at all
in the ingress rules, but that degrades compatibility with existing helm charts.
Relax the constraint so that rule.Host can either be empty, or match the tls.Host[0]
value exactly.
Fixes#9548
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Replace the deprecated var with the one in docs to avoid confusion.
Introduced in 335a5aaf9a.
Updates #8317Fixes#9764
Signed-off-by: Maisem Ali <maisem@tailscale.com>
IPProto has been being converted to and from string formats in multiple
locations with variations in behavior. TextMarshaller and JSONMarshaller
implementations are now added, along with defined accepted and preferred
formats to centralize the logic into a single cross compatible
implementation.
Updates tailscale/corp#15043Fixestailscale/corp#15141
Signed-off-by: James Tucker <james@tailscale.com>
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.
Fixes#9756
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This migrates containerboot to reuse the NetfilterRunner used
by tailscaled instead of manipulating iptables rule itself.
This has the added advantage of now working with nftables and
we can potentially drop the `iptables` command from the container
image in the future.
Updates #9310
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is only relevant for unstable releases and local builds. When local
version is newer than upstream, abort release.
Also, re-add missing newlines in output that were missed in
https://github.com/tailscale/tailscale/pull/9694.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit adds support for getting serial numbers from SMBIOS
on Windows/Linux (and BSD) using go-smbios.
Updates #5902
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
In case cli.Stdout/Stderr get overriden, all CLI output should use them
instead of os.Stdout/Stderr. Update the `update` command to follow this
pattern.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add available update message in "tailscale up" output. Also update the
message in "tailscale status" to match and mention auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Over time all taildrop functionality will be contained in the
taildrop package. This will include end to end unit tests. This is
simply the first smallest piece to move over.
There is no functionality change in this commit.
Updates tailscale/corp#14772
Signed-off-by: Rhea Ghosh <rhea@tailscale.com>
Co-authored-by: Joseph Tsai <joetsai@tailscale.com>
Instead of just falling back to making a TCP query to an upstream DNS
server when the UDP query returns a truncated query, also start a TCP
query in parallel with the UDP query after a given race timeout. This
ensures that if the upstream DNS server does not reply over UDP (or if
the response packet is blocked, or there's an error), we can still make
queries if the server replies to TCP queries.
This also adds a new package, util/race, to contain the logic required for
racing two different functions and returning the first non-error answer.
Updates tailscale/corp#14809
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4311702016c1093b1beaa31b135da1def6d86316
Make the 'tailscale debug component-logs' command print the component names for
which extra logging can be turned on, for easier discoverability of debug
functions.
Updates #cleanup
Co-authored-by: Paul Scott <paul@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.
Specifically, UpdateSrcAddr & UpdateDstAddr.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
We had a misstep with the semantics when applying an optimization that
showed up in the roll into corp. This test ensures that case and related
cases must be retained.
Updates #9410
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
This reverts commit ee90cd02fd.
The outcome is not identical for empty slices. Cloner really needs
tests!
Updates #9601
Signed-off-by: James Tucker <james@tailscale.com>
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
1.50.0 switched containerboot from using `tailscale up`
to `tailscale login`. A side-effect is that a re-usable
authkey is now re-applied on every boot by `tailscale login`,
where `tailscale up` would ignore an authkey if already
authenticated.
Though this looks like it is changing the default, in reality
it is setting the default to match what 1.48 and all
prior releases actually implemented.
Fixes https://github.com/tailscale/tailscale/issues/9539
Fixes https://github.com/tailscale/corp/issues/14953
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
These were missed when adding NodeCapMap and resulted
in tsnet binaries not being able to turn on funnel.
Fixes#9566
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when there is an event on a Tailscale managed Ingress or Service child resource, the right parent type gets reconciled
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
For loading testing & profiling the cost of full netmap updates.
Updates #1909
Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update github.com/go-json-experiment/json to the latest version
and fix the build in light of some breaking API changes.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The test was sending SIGKILL to containerboot, which results in no
signal propagation down to the bash script that is running as a child
process, thus it leaks.
Minor changes to the test daemon script, so that it cleans up the socket
that it creates on exit, and spawns fewer processes.
Fixestailscale/corp#14833
Signed-off-by: James Tucker <james@tailscale.com>
In typical k8s setups, the MTU configured on the eth0 interfaces is typically 1500 which
results in packets being dropped when they make it to proxy pods as the tailscale0 interface
has a 1280 MTU.
As the primary use of this functionality is TCP, add iptables based MSS clamping to allow
connectivity.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was tailscale.com/ts-tailnet-target-ip, which was pretty
redundant. Change it to tailscale.com/tailnet-ip.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR fixes a bug to make sure that we don't allow two configs
exist with duplicate ports
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The kube-apiserver proxy in the operator would only run in
auth proxy mode but thats not always desirable. There are
situations where the proxy should just be a transparent
proxy and not inject auth headers, so do that using a new
env var APISERVER_PROXY and deprecate the AUTH_PROXY env.
THe new env var has three options `false`, `true` and `noauth`.
Updates #8317
Signed-off-by: Maisem Ali <maisem@tailscale.com>
tailcfg.Node zero-value clone equality checks failed when I added a
[]*foo to the structure, as the zero value and it's clone contained a
different slice header.
Updates #9377
Updates #9408
Signed-off-by: James Tucker <james@tailscale.com>
This PR adds validations for the new new funnel/serve
commands under the following rules:
1. There is always a single config for one port (bg or fg).
2. Foreground configs under the same port cannot co-exists (for now).
3. Background configs can change as long as the serve type is the same.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR uses the etag/if-match pattern to ensure multiple calls
to SetServeConfig are synchronized. It currently errors out and
asks the user to retry but we can add occ retries as a follow up.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It became required as of 6e967446e4
Updates #8052
Change-Id: I08d100534254865293c1beca5beff8e529e4e9ac
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
General cleanup and additional test coverage of WIP code.
* use enum for serveType
* combine instances of ServeConfig access within unset
* cleanMountPoint rewritten into cleanURLPath as it only handles URL paths
* refactor and test expandProxyTargetDev
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
I missed this in 343c0f1031 and I guess we don't have integration
tests for wasm. But it compiled! :)
Updates #fixup to a #cleanup
Change-Id: If147b90bab254d144ec851a392e8db10ab97f98e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Sometimes `go test` would exit and close its stdout before we started reading
it, and we would return that "file closed" error then forget to os.Exit(1).
Fixed to prefer the go test subprocess error and exit regardless of the type of
error.
Fixes#9334
Signed-off-by: Paul Scott <paul@tailscale.com>
If the user's running "go test" by hand, no need to spam stderr with
the sentinel marker. It already calls t.Logf (which only gets output
on actual failure, or verbose mode) which is enough to tell users it's
known flaky. Stderr OTOH always prints out and is distracting to
manual "go test" users.
Updates #cleanup
Change-Id: Ie5e6881bae291787c30f75924fa132f4a28abbb2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR ensures calls to the LocalBackend are not happening
multiples times and ensures the set/unset methods are
only manipulating the serve config
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, foreground mode only worked in the simple case of `tailscale funnel <port>`.
This PR ensures that whatever you can do in the background can also be
done in the foreground such as setting mount paths or tcp forwarding.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
> **Note**
> Behind the `TAILSCALE_FUNNEL_DEV` flag
* Expose additional listeners through flags
* Add a --bg flag to run in the background
* --set-path to set a path for a specific target (assumes running in background)
See the parent issue for more context.
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a SessionID field to the ipn.Notify struct so that
ipn buses can identify a session and register deferred clean up
code in the future. The first use case this is for is to be able to
tie foreground serve configs to a specific watch session and ensure
its clean up when a connection is closed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
We use it a number of places in different repos. Might as well make
one. Another use is coming.
Updates #cleanup
Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Our BETA serve help text is long and often hides the actual error
in the user's usage. Instead of printing the full text, prompt
users to use `serve --help` if they want the help info.
Fixes#14274
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
It would just fail the entire pkg, but would not print any
logs. It was already tracking all the logs, so have it emit
them when the pkg fails/times out.
Updates #9231
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We already had a path on the web client server struct, but hadn't
plumbed it through to the CLI. Add that now and use it for Synology and
QNAP instead of hard-coding the path. (Adding flag for QNAP is
tailscale/tailscale-qpkg#112) This will allow supporting other
environments (like unraid) without additional changes to the client/web
package.
Also fix a small bug in unraid handling to only include the csrf token
on POST requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
I noticed that failed tests were leaving aroudn stray tailscaled processes
on macOS at least.
To repro, add this to tstest/integration:
func TestFailInFewSeconds(t *testing.T) {
t.Parallel()
time.Sleep(3 * time.Second)
os.Exit(1)
t.Fatal("boom")
}
Those three seconds let the other parallel tests (with all their
tailscaled child processes) start up and start running their tests,
but then we violently os.Exit(1) the test driver and all the children
were kept alive (and were spinning away, using all available CPU in
gvisor scheduler code, which is a separate scary issue)
Updates #cleanup
Change-Id: I9c891ed1a1ec639fb2afec2808c04dbb8a460e0e
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
As a fallback to package managers, allow updating tailscale that was
self-installed in some way. There are some tricky bits around updating
the systemd unit (should we stick to local binary paths or to the ones
in tailscaled.service?), so leaving that out for now.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of confusing users, emit an event that explicitly tells the
user that HTTPS is disabled on the tailnet and that ingress may not
work until they enable it.
Updates #9141
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Port 8080 is routinely used for HTTP services, make it easier to
use --forwards=tcp/8080/... by moving the metrics port out of the
way.
Updates #1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Ensures that Statefulset reconciler config has only one of Cluster target IP or tailnet target IP.
Adds a test case for containerboot egress proxy mode.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
First part of work for the functionality that allows users to create an egress
proxy to access Tailnet services from within Kubernetes cluster workloads.
This PR allows creating an egress proxy that can access Tailscale services over HTTP only.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
While investigating the fix in 7538f38671,
I was curious why the testwrapper didn't fail. Turns out if the test
times out and there was no explicit failure, the only message we get
is that the overall pkg failed and no failure information about the
individual test. This resulted in a 0 exit code.
This fixes that by failing the explicit case of the pkg failing when
there is nothing to retry for that pkg.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes wsconn.Conns somewhat present reasonably when they are
the client of an http.Request, rather than just put a placeholder
in that field.
Updates tailscale/corp#13777
Signed-off-by: David Anderson <danderson@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
