We're trying to gut 90% of the ipnserver package. A lot will get
deleted, some will move to LocalBackend, and a lot is being moved into
this new ipn/ipnauth package which will be leaf-y and testable.
This is a baby step towards moving some stuff to ipnauth.
Update #6417
Updates tailscale/corp#8051
Change-Id: I28bc2126764f46597d92a2d72565009dc6927ee0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Run an inotify goroutine and watch if another program takes over
/etc/inotify.conf. Log if so.
For now this only logs. In the future I want to wire it up into the
health system to warn (visible in "tailscale status", etc) about the
situation, with a short URL to more info about how you should really
be using systemd-resolved if you want programs to not fight over your
DNS files on Linux.
Updates #4254 etc etc
Change-Id: I86ad9125717d266d0e3822d4d847d88da6a0daaa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Example output:
# Health check:
# - Some peers are advertising routes but --accept-routes is false
Also, move "tailscale status" health checks to the bottom, where they
won't be lost in large netmaps.
Updates #2053
Updates #6266
Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Leave only the HTTP/auth bits in localapi.
Change-Id: I8e23fb417367f1e0e31483e2982c343ca74086ab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is similar to the golang.org/x/tools/internal/fastwalk I'd
previously written but not recursive and using mem.RO.
The metrics package already had some Linux-specific directory reading
code in it. Move that out to a new general package that can be reused
by portlist too, which helps its scanning of all /proc files:
name old time/op new time/op delta
FindProcessNames-8 2.79ms ± 6% 2.45ms ± 7% -12.11% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
FindProcessNames-8 62.9kB ± 0% 33.5kB ± 0% -46.76% (p=0.000 n=9+10)
name old allocs/op new allocs/op delta
FindProcessNames-8 2.25k ± 0% 0.38k ± 0% -82.98% (p=0.000 n=9+10)
Change-Id: I75db393032c328f12d95c39f71c9742c375f207a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.
Avoid this problem by moving all network logging types to a single package.
We also update staticcheck to take in:
003d277bcf
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Turns out using win32 instead of shelling out to child processes is a
bit faster:
name old time/op new time/op delta
GetListIncremental-4 278ms ± 2% 0ms ± 7% -99.93% (p=0.000 n=8+10)
name old alloc/op new alloc/op delta
GetListIncremental-4 238kB ± 0% 9kB ± 0% -96.12% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
GetListIncremental-4 1.19k ± 0% 0.02k ± 0% -98.49% (p=0.000 n=10+10)
Fixes#3876 (sadly)
Change-Id: I1195ac5de21a8a8b3cdace5871d263e81aa27e91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
name old time/op new time/op delta
GetList-8 11.2ms ± 5% 11.1ms ± 3% ~ (p=0.661 n=10+9)
name old alloc/op new alloc/op delta
GetList-8 83.3kB ± 1% 67.4kB ± 1% -19.05% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
GetList-8 2.89k ± 2% 2.19k ± 1% -24.24% (p=0.000 n=10+10)
(real issue is we're calling this code as much as we are, but easy
enough to make it efficient because it'll still need to be called
sometimes in any case)
Updates #5958
Change-Id: I90c20278d73e80315a840aed1397d24faa308d93
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We removed it in #4806 in favor of the built-in functionality from the
nhooyr.io/websocket package. However, it has an issue with deadlines
that has not been fixed yet (see nhooyr/websocket#350). Temporarily
go back to using a custom wrapper (using the fix from our fork) so that
derpers will stop closing connections too aggressively.
Updates #5921
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
If the wgcfg.Config is specified with network logging arguments,
then Userspace.Reconfig starts up an asynchronous network logger,
which is shutdown either upon Userspace.Close or when Userspace.Reconfig
is called again without network logging or route arguments.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I added new functions to winutil to obtain the state of a service and all
its depedencies, serialize them to JSON, and write them to a Logf.
When tstun.New returns a wrapped ERROR_DEVICE_NOT_AVAILABLE, we know that wintun
installation failed. We then log the service graph rooted at "NetSetupSvc".
We are interested in that specific service because network devices will not
install if that service is not running.
Updates https://github.com/tailscale/tailscale/issues/5531
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
* and move goroutine scrubbing code to its own package for reuse
* bump capver to 45
Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.
For DoH, the customer ID is in the URL path.
For IPv6, the IP address includes the customer ID in the lower bits.
For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.
We don't use the IP linking mechanism.
Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.
Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.
If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.
Updates #2452
Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is entirely optional (i.e. failing in this code is non-fatal) and
only enabled on Linux for now. Additionally, this new behaviour can be
disabled by setting the TS_DEBUG_DISABLE_AF_PACKET environment variable.
Updates #3824
Replaces #5474
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: David Anderson <danderson@tailscale.com>
This lets the control plane can make HTTP requests to nodes.
Then we can use this for future things rather than slapping more stuff
into MapResponse, etc.
Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This works around the 2.3s delay in short name lookups when SNR is
enabled.
C:\Windows\System32\drivers\etc\hosts file. We only add known hosts that
match the search domains, and we populate the list in order of
Search Domains so that our matching algorithm mimics what Windows would
otherwise do itself if SNR was off.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Switch deephash to use sha256x.Hash.
We add sha256x.HashString to efficiently hash a string.
It uses unsafe under the hood to convert a string to a []byte.
We also modify sha256x.Hash to export the underlying hash.Hash
for testing purposes so that we can intercept all hash.Hash calls.
Performance:
name old time/op new time/op delta
Hash-24 19.8µs ± 1% 19.2µs ± 1% -3.01% (p=0.000 n=10+10)
HashPacketFilter-24 2.61µs ± 0% 2.53µs ± 1% -3.01% (p=0.000 n=8+10)
HashMapAcyclic-24 31.3µs ± 1% 29.8µs ± 0% -4.80% (p=0.000 n=10+9)
TailcfgNode-24 1.83µs ± 1% 1.82µs ± 2% ~ (p=0.305 n=10+10)
HashArray-24 344ns ± 2% 323ns ± 1% -6.02% (p=0.000 n=9+10)
The performance gains is not as dramatic as sha256x over sha256 due to:
1. most of the hashing already occurring through the direct memory hashing logic, and
2. what does not go through direct memory hashing is slowed down by reflect.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Following the pattern elsewhere, we create a new tka-specific types package for the types
that need to couple between the serialized structure types, and tka.
Signed-off-by: Tom DNetto <tom@tailscale.com>
- A network-lock key is generated if it doesn't already exist, and stored in the StateStore. The public component is communicated to control during registration.
- If TKA state exists on the filesystem, a tailnet key authority is initialized (but nothing is done with it for now).
Signed-off-by: Tom DNetto <tom@tailscale.com>
This adds the inverse to CapabilityFileSharingSend so that senders can
identify who they can Taildrop to.
Updates #2101
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And rewrite cloud detection to try to do only zero or one metadata
discovery request for all clouds, only doing a first (or second) as
confidence increases. Work remains for Windows, but a start.
And add Cloud to tailcfg.Hostinfo, which helped with testing using
"tailcfg debug hostinfo".
Updates #4983 (Linux only)
Updates #4984
Change-Id: Ib03337089122ce0cb38c34f724ba4b4812bc614e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And remove the GCP special-casing from ipn/ipnlocal; do it only in the
forwarder for *.internal.
Fixes#4980Fixes#4981
Change-Id: I5c481e96d91f3d51d274a80fbd37c38f16dfa5cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This does three things:
* If you're on GCP, it adds a *.internal DNS split route to the
metadata server, so we never break GCP DNS names. This lets people
have some Tailscale nodes on GCP and some not (e.g. laptops at home)
without having to add a Tailnet-wide *.internal DNS route.
If you already have such a route, though, it won't overwrite it.
* If the 100.100.100.100 DNS forwarder has nowhere to forward to,
it forwards it to the GCP metadata IP, which forwards to 8.8.8.8.
This means there are never errNoUpstreams ("upstream nameservers not set")
errors on GCP due to e.g. mangled /etc/resolv.conf (GCP default VMs
don't have systemd-resolved, so it's likely a DNS supremacy fight)
* makes the DNS fallback mechanism use the GCP metadata IP as a
fallback before our hosted HTTP-based fallbacks
I created a default GCP VM from their web wizard. It has no
systemd-resolved.
I then made its /etc/resolv.conf be empty and deleted its GCP
hostnames in /etc/hosts.
I then logged in to a tailnet with no global DNS settings.
With this, tailscaled writes /etc/resolv.conf (direct mode, as no
systemd-resolved) and sets it to 100.100.100.100, which then has
regular DNS via the metadata IP and *.internal DNS via the metadata IP
as well. If the tailnet configures explicit DNS servers, those are used
instead, except for *.internal.
This also adds a new util/cloudenv package based on version/distro
where the cloud type is only detected once. We'll likely expand it in
the future for other clouds, doing variants of this change for other
popular cloud environments.
Fixes#4911
RELNOTES=Google Cloud DNS improvements
Change-Id: I19f3c2075983669b2b2c0f29a548da8de373c7cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We weren't wiring up netstack.Impl to the LocalBackend in some cases
on Windows. This fixes Windows 7 when run as a service.
Updates #4750 (fixes after pull in to corp repo)
Change-Id: I9ce51b797710f2bedfa90545776b7628c7528e99
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional
communication), but we should be able to do it over WebSockets. Reuses
derp WebSocket support that allows us to turn a WebSocket connection
into a net.Conn.
Updates #3157
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
AFAICT this isn't documented on MSDN, but based on the issue referenced below,
NRPT rules are not working when a rule specifies > 50 domains.
This patch modifies our NRPT rule generator to split the list of domains
into chunks as necessary, and write a separate rule for each chunk.
For compatibility reasons, we continue to use the hard-coded rule ID, but
as additional rules are required, we generate new GUIDs. Those GUIDs are
stored under the Tailscale registry path so that we know which rules are ours.
I made some changes to winutils to add additional helper functions in support
of both the code and its test: I added additional registry accessors, and also
moved some token accessors from paths to util/winutil.
Fixes https://github.com/tailscale/coral/issues/63
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
I wrote this code way back at the beginning of my tenure at Tailscale when we
had concerns about needing to restore deleted machine keys from backups.
We never ended up using this functionality, and the code is now getting in the
way, so we might as well remove it.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Once a stop request is received and the service updates its status to `svc.StopPending`,
it should continue running *until the shutdown sequence is complete*, and then
return out of `(*ipnService).Execute`, which automatically sends a `svc.Stopped`
notification to Windows.
To make this happen, I changed the loop so that it runs until `doneCh` is
closed, and then returns. I also removed a spurious `svc.StopPending` notification
that the Windows Service Control Manager might be interpreting as a request for
more time to shut down.
Finally, I added some optional logging that sends a record of service notifications
to the Windows event log, allowing us to more easily correlate with any Service
Control Manager errors that are sent to the same log.
Change-Id: I5b596122e5e89c4c655fe747a612a52cb4e8f1e0
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
No CLI support yet. Just the curl'able version if you know the peerapi
port. (like via a TSMP ping)
Updates #306
Change-Id: I0662ba6530f7ab58d0ddb24e3664167fcd1c4bcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I've done this a handful of times in the past and again today.
Time to make it a supported thing for the future.
Used while debugging tailscale/corp#4559 (macsys CLI issues)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
