If it's in a non-standard table, as it is on Unifi UDM Pro, apparently.
Updates #4038 (probably fixes, but don't have hardware to verify)
Change-Id: I2cb9a098d8bb07d1a97a6045b686aca31763a937
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I introduced a bug in 8fe503057d when unifying oneConnListener
implementations.
The NewOneConnListenerFrom API was easy to misuse (its Close method
closes the underlying Listener), and we did (via http.Serve, which
closes the listener after use, which meant we were close the peerapi's
listener, even though we only wanted its Addr)
Instead, combine those two constructors into one and pass in the Addr
explicitly, without delegating through to any Listener.
Change-Id: I061d7e5f842e0cada416e7b2dd62100d4f987125
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If we've already connected to a certain name's IP in the past, don't
assume the problem was DNS related. That just puts unnecessarily load
on our bootstrap DNS servers during regular restarts of Tailscale
infrastructure components.
Also, if we do do a bootstrap DNS lookup and it gives the same IP(s)
that we already tried, don't try them again.
Change-Id: I743e8991a7f957381b8e4c1508b8e9d0df1782fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No behavior changes (intended, at least).
This is in prep for future changes to this package, which would get
too complicated in the current style.
Change-Id: Ic260f8e34ae2f64f34819d4a56e38bee8d8ac5ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This TODO was both added and fixed in 506c727e3.
As I recall, I wasn't originally going to do it because it seemed
annoying, so I wrote the TODO, but then I felt bad about it and just
did it, but forgot to remove the TODO.
Change-Id: I8f3514809ad69b447c62bfeb0a703678c1aec9a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I was about to add a third copy, so unify them now instead.
Change-Id: I3b93896aa1249b1250a6b1df4829d57717f2311a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Avoid some work when D-Bus isn't running.
Change-Id: I6f89bb75fdb24c13f61be9b400610772756db1ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If systemd-resolved is enabled but not running (or not yet running,
such as early boot) and resolv.conf is old/dangling, we weren't
detecting systemd-resolved.
This moves its ping earlier, which will trigger it to start up and
write its file.
Updates #3362 (likely fixes)
Updates #3531 (likely fixes)
Change-Id: I6392944ac59f600571c43b8f7a677df224f2beed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailscaled was using 100% CPU on a machine with ~1M lines, 100MB+
of /proc/net/route data.
Two problems: in likelyHomeRouterIPLinux, we didn't stop reading the
file once we found the default route (which is on the first non-header
line when present). Which meant it was finding the answer and then
parsing 100MB over 1M lines unnecessarily. Second was that if the
default route isn't present, it'd read to the end of the file looking
for it. If it's not in the first 1,000 lines, it ain't coming, or at
least isn't worth having. (it's only used for discovering a potential
UPnP/PMP/PCP server, which is very unlikely to be present in the
environment of a machine with a ton of routes)
Change-Id: I2c4a291ab7f26aedc13885d79237b8f05c2fd8e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.
This is that experiment.
Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)
Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only search domains are stored. This was an oversight
(under?) on my part.
As things are now, when MagicDNS is on and "Override local DNS" is
off, the dns forwarder has to timeout before names resolve. This
introduces a pretty annoying lang that makes everything feel
extremely slow. You will also see an error: "upstream nameservers
not set".
I tested with "Override local DNS" on and off. In both situations
things seem to function as expected (and quickly).
Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
Go 1.17 added a HandshakeContext func to take care of timeouts during
TLS handshaking, so switch from our homegrown goroutine implementation
to the standard way.
Signed-off-by: David Anderson <danderson@tailscale.com>
Cancelling the context makes the timeout goroutine race with the write that
reports a successful TLS handshake, so you can end up with a successful TLS
handshake that mysteriously reports that it timed out after ~0s in flight.
The context is always canceled and cleaned up as the function exits, which
happens mere microseconds later, so just let function exit clean up and
thereby avoid races.
Signed-off-by: David Anderson <danderson@tailscale.com>
On Synology, the /etc/resolv.conf has tabs in it, which this
resolv.conf parser (we have two, sigh) didn't handle.
Updates #3710
Change-Id: I86f8e09ad1867ee32fa211e85c382a27191418ea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Tailscale seems to be breaking WSL configurations lately. Until we
understand what changed, turn off Tailscale's involvement by default
and make it opt-in.
Updates #2815
Change-Id: I9977801f8debec7d489d97761f74000a4a33f71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
OpenBSD 6.9 and up has a daemon which handles nameserver configuration. This PR
teaches the OpenBSD dns manager to check if resolvd is being used. If it is, it
will use the route(8) command to tell resolvd to add the Tailscale dns entries
to resolv.conf
Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
Fixes#3660
RELNOTE=MagicDNS now works over IPv6 when CGNAT IPv4 is disabled.
Change-Id: I001e983df5feeb65289abe5012dedd177b841b45
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And delete the unused code in net/dns/resolver/neterr_*.go.
Change-Id: Ibe62c486bacce2733eb9968c96a98cbbdb2758bd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Treat UDP send EPERM errors as a lost UDP packet, not something super
fatal. That's just the Linux firewall preventing it from going out.
And add a leaf package net/neterror for that (and future) policy that
all three packages can share, with tests.
Updates #3619
Change-Id: Ibdb838c43ee9efe70f4f25f7fc7fdf4607ba9c1d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Only if the source address isn't on the currently active interface or
a ping of the DERP server fails.
Updates #3619
Change-Id: I6bf06503cff4d781f518b437c8744ac29577acc8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was pretty ill-defined before and mostly for logging. But I wanted
to start depending on it, so define what it is and make Windows match
the other operating systems, without losing the log output we had
before. (and add tests for that)
Change-Id: I0fbbba1cfc67a265d09dd6cb738b73f0f6005247
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't just ignore them. See if this makes them calm down.
Updates #3363
Change-Id: Id1d66308e26660d26719b2538b577522a1e36b63
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To convince me it's not as alloc-y as it looks.
Change-Id: I503a0cc267268a23d2973dfde9833c420be4e868
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And it updates the build tag style on a couple files.
Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is enough to handle the DNS queries as generated by Go's
net package (which our HTTP/SOCKS client uses), and the responses
generated by the ExitDNS DoH server.
This isn't yet suitable for putting on 100.100.100.100 where a number
of different DNS clients would hit it, as this doesn't yet do
EDNS0. It might work, but it's untested and likely incomplete.
Likewise, this doesn't handle anything about truncation, as the
exchanges are entirely in memory between Go or DoH. That would also
need to be handled later, if/when it's hooked up to 100.100.100.100.
Updates #3507
Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It will be used for ICMPv6 next, so pass in the proto.
Also, use the ipproto constants rather than hardcoding the mysterious
number.
Change-Id: I57b68bdd2d39fff75f82affe955aff9245de246b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And simplify, unexport some tsdial/netstack stuff in the the process.
Fixes#3475
Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This starts to refactor tsdial.Dialer's name resolution to have
different stages: in-memory MagicDNS vs system resolution. A future
change will plug in ExitDNS resolution.
This also plumbs a Dialer into netstack and unexports the dnsMap
internals.
And it removes some of the async AddNetworkMapCallback usage and
replaces it with synchronous updates of the Dialer's netmap
from LocalBackend, since the LocalBackend has the Dialer too.
Updates #3475
Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this, I'm able to send a Taildrop file (using "tailscale file cp")
from a Linux machine running --tun=userspace-networking.
Updates #2179
Change-Id: I4e7a4fb0fbda393e4fb483adb06b74054a02cfd0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for moving stuff out of LocalBackend.
Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.
Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.
As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.
A number of steps remain, including but limited to:
* move a bunch more random dialing stuff
* make netstack-mode tailscaled be able to use exit node's DNS proxy,
teaching tsdial's resolver to use it when an exit node is in use.
Updates #1713
Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.
Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.
Updates #1713
Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The block-write and block-read tests are both flaky,
because each assumes it can get a normal read/write
completed within 10ms. This isn’t always true.
We can’t increase the timeouts, because that slows down the test.
However, we don’t need to issue a regular read/write for this test.
The immediately preceding tests already test this code,
using a far more generous timeout.
Remove the extraneous read/write.
This drops the failure rate from 1 per 20,000 to undetectable
on my machine.
While we’re here, fix a typo in a debug print statement.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Without the continue, we might overwrite our current meta
with a zero meta.
Log the error, so that we can check for anything unexpected.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Currently, comments in resolv.conf cause our parser to fail,
with error messages like:
ParseIP("192.168.0.100 # comment"): unexpected character (at " # comment")
Fix that.
Noticed while looking through logs.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
When this happens, it is incredibly noisy in the logs.
It accounts for about a third of all remaining
"unexpected" log lines from a recent investigation.
It's not clear that we know how to fix this,
we have a functioning workaround,
and we now have a (cheap and efficient) metric for this
that we can use for measurements.
So reduce the logging to approximately once per minute.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
One of the most common "unexpected" log lines is:
"network state changed, but stringification didn't"
One way that this can occur is if an interesting interface
(non-Tailscale, has interesting IP address)
gains or loses an uninteresting IP address (link local or loopback).
The fact that the interface is interesting is enough for EqualFiltered
to inspect it. The fact that an IP address changed is enough for
EqualFiltered to declare that the interfaces are not equal.
But the State.String method reasonably declines to print any
uninteresting IP addresses. As a result, the network state appears
to have changed, but the stringification did not.
The String method is correct; nothing interesting happened.
This change fixes this by adding an IP address filter to EqualFiltered
in addition to the interface filter. This lets the network monitor
ignore the addition/removal of uninteresting IP addresses.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The Windows BOOL type is an int32. We were using a bool,
which is a one byte wide. This could be responsible for the
ERROR_INVALID_PARAMETER errors we were seeing for calls to
WinHttpGetProxyForUrl.
We manually checked all other existing Windows syscalls
for similar mistakes and did not find any.
Updates #879
Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
There are lots of lines in the logs of the form:
portmapper: unexpected PMP probe response: {OpCode:128 ResultCode:3
SecondsSinceEpoch:NNN MappingValidSeconds:0 InternalPort:0
ExternalPort:0 PublicAddr:0.0.0.0}
ResultCode 3 here means a network failure, e.g. the NAT box itself has
not obtained a DHCP lease. This is not an indication that something
is wrong in the Tailscale client, so use different wording here
to reflect that. Keep logging, so that we can analyze and debug
the reasons that PMP probes fail.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Lets the systemd-resolved OSConfigurator report health changes
for out of band config resyncs.
Updates #3327
Signed-off-by: David Anderson <danderson@tailscale.com>
Don't set all the *.arpa. reverse DNS lookup domains if systemd-resolved
is old and can't handle them.
Fixes#3188
Change-Id: I283f8ce174daa8f0a972ac7bfafb6ff393dde41d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.
This also allows us to tighten the "no allocs"
test in wgengine/filter.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Now that we multicast the SSDP query, we can get IGD offers from
devices other than the current device's default gateway. We don't want
to accidentally bind ourselves to those.
Updates #3197
Signed-off-by: David Anderson <danderson@tailscale.com>
And the derper change to add a CORS endpoint for latency measurement.
And a little magicsock change to cut down some log spam on js/wasm.
Updates #3157
Change-Id: I5fd9e6f5098c815116ddc8ac90cbcd0602098a48
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are /etc/resolv.conf files out there where resolvconf wrote
the file but pointed to systemd-resolved as the nameserver.
We're better off handling those as systemd-resolved.
> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
> # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
> # 127.0.0.53 is the systemd-resolved stub resolver.
> # run "systemd-resolve --status" to see details about the actual nameservers.
Fixes https://github.com/tailscale/tailscale/issues/3026
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
In some containers, /etc/resolv.conf is a bind-mount from outside the container.
This prevents renaming to or from /etc/resolv.conf, because it's on a different
filesystem from linux's perspective. It also prevents removing /etc/resolv.conf,
because doing so would break the bind-mount.
If we find ourselves within this environment, fall back to using copy+delete when
renaming to /etc/resolv.conf, and copy+truncate when renaming from /etc/resolv.conf.
Fixes#3000
Co-authored-by: Denton Gentry <dgentry@tailscale.com>
Signed-off-by: David Anderson <danderson@tailscale.com>
The "go generate" command blindly looks for "//go:generate" anywhere
in the file regardless of whether it is truly a comment.
Prevent this false positive in cloner.go by mangling the string
to look less like "//go:generate".
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
When a DNS server claims to be unable or unwilling to handle a request,
instead of passing that refusal along to the client, just treat it as
any other error trying to connect to the DNS server. This prevents DNS
requests from failing based on if a server can respond with a transient
error before another server is able to give an actual response. DNS
requests only failing *sometimes* is really hard to find the cause of
(#1033).
Signed-off-by: Smitty <me@smitop.com>
"skipping portmap; gateway range likely lacks support" is really
spammy on cloud systems, and not very useful in debugging.
Fixes https://github.com/tailscale/tailscale/issues/3034
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
We added the initial handling only for macOS and iOS.
With 1.16.0 now released, suppress forwarding DNS-SD
on all platforms to test it through the 1.17.x cycle.
Updates #2442
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
On iOS (and possibly other platforms), sometimes our UDP socket would
get stuck in a state where it was bound to an invalid interface (or no
interface) after a network reconfiguration. We can detect this by
actually checking the error codes from sending our STUN packets.
If we completely fail to send any STUN packets, we know something is
very broken. So on the next STUN attempt, let's rebind the UDP socket
to try to correct any problems.
This fixes a problem where iOS would sometimes get stuck using DERP
instead of direct connections until the backend was restarted.
Fixes#2994
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
I forgot to include this file in the earlier
7cf8ec8108 commit.
This exists purely to keep "go mod tidy" happy.
Updates #1609
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We still try the host's x509 roots first, but if that fails (like if
the host is old), we fall back to using LetsEncrypt's root and
retrying with that.
tlsdial was used in the three main places: logs, control, DERP. But it
was missing in dnsfallback. So added it there too, so we can run fine
now on a machine with no DNS config and no root CAs configured.
Also, move SSLKEYLOGFILE support out of DERP. tlsdial is the logical place
for that support.
Fixes#1609
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
DNSSEC is an availability issue, as recently demonstrated by the
Slack issue, with limited security advantage. DoH on the other hand
is a critical security upgrade. This change adds DoH support for the
non-DNSSEC endpoints of Quad9.
https://www.quad9.net/service/service-addresses-and-features#unsec
Signed-off-by: Filippo Valsorda <hi@filippo.io>
It was in the wrong filter direction before, per CPU profiles
we now have.
Updates #1526 (maybe fixes? time will tell)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Windows has a public dns.Flush used in router_windows.go.
However that won't work for platforms like Linux, where
we need a different flush mechanism for resolved versus
other implementations.
We're instead adding a FlushCaches method to the dns Manager,
which can be made to work on all platforms as needed.
Fixes https://github.com/tailscale/tailscale/issues/2132
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The earlier 382b349c54 was too late,
as engine creation itself needed to listen on things.
Fixes#2827
Updates #2822
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently plumb full URLs for DNS resolvers from the control server
down to the client. But when we pass the values into the net/dns
package, we throw away any URL that isn't a bare IP. This commit
continues the plumbing, and gets the URL all the way to the built in
forwarder. (It stops before plumbing URLs into the OS configurations
that can handle them.)
For #2596
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Reported on IRC: in an edge case, you can end up with a directManager DNS
manager and --accept-dns=false, in which case we should do nothing, but
actually end up restarting resolved whenever the netmap changes, even though
the user told us to not manage DNS.
Signed-off-by: David Anderson <danderson@tailscale.com>
Reported on IRC: a resolv.conf that contained two entries for
"nameserver 127.0.0.53", which defeated our "is resolved actually
in charge" check. Relax that check to allow any number of nameservers,
as long as they're all 127.0.0.53.
Signed-off-by: David Anderson <danderson@tailscale.com>
It wasn't using the right metric. Apparently you're supposed to sum the route
metric and interface metric. Whoops.
While here, optimize a few little things too, not that this code
should be too hot.
Fixes#2707 (at least; probably dups but I'm failing to find)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that we have the easier-to-parse go:build build tags,
it is straightforward to simplify them. Yay.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Mostly so the Linux one can use Linux-specific stuff in package
syscall and not use os/exec for uname for portability.
But also it helps deps a tiny bit on iOS.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This logs some basic statistics for UPnP, so that tailscale can better understand what routers
are being used and how to connect to them.
Signed-off-by: julianknodt <julianknodt@gmail.com>
This adds a PCP test to the IGD test server, by hardcoding in a few observed packets from
Denton's box.
Signed-off-by: julianknodt <julianknodt@gmail.com>
And use dynamic port numbers in tests, as Linux on GitHub Actions and
Windows in general have things running on these ports.
Co-Author: Julian Knodt <julianknodt@gmail.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, we hashed the question and combined it with the original
txid which was useful when concurrent queries were multiplexed on a
single local source port. We encountered some situations where the DNS
server canonicalizes the question in the response (uppercase converted
to lowercase in this case), which resulted in responses that we couldn't
match to the original request due to hash mismatches. This includes a
new test to cover that situation.
Fixes#2597
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
PCP handles external IPs by allowing the client to specify them in the packet, which is more
explicit than requiring 2 packets from PMP, so allow for future changes to add it in easily.
Signed-off-by: julianknodt <julianknodt@gmail.com>
Still very much a prototype (hard-coded IPs, etc) but should be
non-invasive enough to submit at this point and iterate from here.
Updates #2589
Co-Author: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to Tailscale 1.12 it detected UPnP on any port.
Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports.
Then start plumbing its discovered Location header port number to the
code that was assuming port 5000.
Fixes#2109
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There's a call to Now once per packet.
Move to mono.Now.
Though the current implementation provides high precision,
we document it to be coarse, to preserve the ability
to switch to a coarse monotonic time later.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Go 1.17 switches to a register ABI on amd64 platforms.
Part of that switch is that go and defer calls use an argument-less
closure, which allocates. This means that we have an extra
alloc in some DNS work. That's unfortunate but not a showstopper,
and I don't see a clear path to fixing it.
The other performance benefits from the register ABI will all
but certainly outweigh this extra alloc.
Fixes#2545
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
I don't know how to get access to a real packet. Basing this commit
entirely off:
+------------+--------------+------------------------------+
| Field Name | Field Type | Description |
+------------+--------------+------------------------------+
| NAME | domain name | MUST be 0 (root domain) |
| TYPE | u_int16_t | OPT (41) |
| CLASS | u_int16_t | requestor's UDP payload size |
| TTL | u_int32_t | extended RCODE and flags |
| RDLEN | u_int16_t | length of all RDATA |
| RDATA | octet stream | {attribute,value} pairs |
+------------+--------------+------------------------------+
From https://datatracker.ietf.org/doc/html/rfc6891#section-6.1.2
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
The handoff between tstun.Wrap's Read and poll methods
is one of the per-packet hotspots. It shows up in pprof.
Making outbound buffered increases throughput.
It is hard to measure exactly how much, because the numbers
are highly variable, but I'd estimate it at about 1%,
using the best observed max throughput across three runs.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The handoff between tstun.Wrap's Read and poll methods
is one of the per-packet hotspots. It shows up in pprof.
Making outbound buffered increases throughput.
It is hard to measure exactly how much, because the numbers
are highly variable, but I'd estimate it at about 1%,
using the best observed max throughput across three runs.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Tested manually with:
$ go test -v ./net/dnscache/ -dial-test=bogusplane.dev.tailscale.com:80
Where bogusplane has three A records, only one of which works.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of blasting away at all upstream resolvers at the same time,
make a timing plan upon reconfiguration and have each upstream have an
associated start delay, depending on the overall forwarding config.
So now if you have two or four upstream Google or Cloudflare DNS
servers (e.g. two IPv4 and two IPv6), we now usually only send a
query, not four.
This is especially nice on iOS where we start fewer DoH queries and
thus fewer HTTP/1 requests (because we still disable HTTP/2 on iOS),
fewer sockets, fewer goroutines, and fewer associated HTTP buffers,
etc, saving overall memory burstiness.
Fixes#2436
Updates tailscale/corp#2250
Updates tailscale/corp#2238
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a place to hang state in a future change for #2436.
For now this just simplifies the send signature without
any functional change.
Updates #2436
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, this was incorrectly returning the internal port, and using that with the external
exposed IP when it did not use WANIPConnection2. In the case when we must provide a port, we
return it instead.
Noticed this while implementing the integration test for upnp.
Signed-off-by: julianknodt <julianknodt@gmail.com>
It was a huge chunk of the overall log output and made debugging
difficult. Omit and summarize the spammy *.arpa parts instead.
Fixestailscale/corp#2066 (to which nobody had opinions, so)
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
Recognize Cloudflare, Google, Quad9 which are by far the
majority of upstream DNS servers that people use.
RELNOTE=MagicDNS now uses DNS-over-HTTPS when querying popular upstream resolvers,
so DNS queries aren't sent in the clear over the Internet.
Updates #915 (might fix it?)
Updates #988 (gets us closer, if it fixes Android)
Updates #74 (not yet configurable, but progress)
Updates #2056 (not yet configurable, dup of #74?)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Added the net/speedtest package that contains code for starting up a
speedtest server and a client. The speedtest command for starting a
client takes in a duration for the speedtest as well as the host and
port of the speedtest server to connect to. The speedtest command for
starting a server takes in a host:port pair to listen on.
Signed-off-by: Aaditya Chaudhary <32117362+AadityaChaudhary@users.noreply.github.com>
With netns handling localhost now, existing tests no longer
need special handling. The tests set up their connections to
localhost, and the connections work without fuss.
Remove the special handling for tests.
Also remove the hostinfo.TestCase support, since this was
the only use of it. It can be added back later if really
needed, but it would be better to try to make tests work
without special cases.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
netns_linux checked whether "ip rule" could run to determine
whether to use SO_MARK for network namespacing. However in
Linux environments which lack CAP_NET_ADMIN, such as various
container runtimes, the "ip rule" command succeeds but SO_MARK
fails due to lack of permission. SO_BINDTODEVICE would work in
these environments, but isn't tried.
In addition to running "ip rule" check directly whether SO_MARK
works or not. Among others, this allows Microsoft Azure App
Service and AWS App Runner to work.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
