High-level API:
type Statistics struct { ... }
type Counts struct { TxPackets, TxBytes, RxPackets, RxBytes uint64 }
func (*Statistics) UpdateTx([]byte)
func (*Statistics) UpdateRx([]byte)
func (*Statistics) Extract() map[flowtrack.Tuple]Counts
The API accepts a []byte instead of a packet.Parsed so that a future
implementation can directly hash the address and port bytes,
which are contiguous in most IP packets.
This will be useful for a custom concurrent-safe hashmap implementation.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.
Fixes#5743
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
I brain-o'ed the math earlier. The NextDNS prefix is /32 (actually
/33, but will guarantee last bit is 0), so we have 128-32 = 96 bits
(12 bytes) of config/profile ID that we can extract. NextDNS doesn't
currently use all those, but might.
Updates #2452
Change-Id: I249bd28500c781e45425fd00fd3f46893ae226a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- removed some in-flow time calls
- increase buffer size to 2MB to overcome syscall cost
- move relative time computation from record to report time
Signed-off-by: James Tucker <james@tailscale.com>
The fragment offset is an 8 byte offset rather than a byte offset, so
the short packet limit is now in fragment block size in order to compare
with the offset value.
The packet flags are in the first 3 bits of the flags/frags byte, and
so after conversion to a uint16 little endian value they are at the
start, not the end of the value - the mask for extracting "more
fragments" is adjusted to match this byte.
Extremely short fragments less than 80 bytes are dropped, but fragments
over 80 bytes are now accepted.
Fixes#5727
Signed-off-by: James Tucker <james@tailscale.com>
This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.
Updates #1634
Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The plan has changed. Doing query parameters rather than path +
heades. NextDNS added support for query parameters.
Updates #2452
Change-Id: I4783c0a06d6af90756d9c80a7512644ba702388c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For debugging a macOS-specific magicsock issue. macOS runs in
bind-to-interface mode always. This lets me force Linux into the same
mode as macOS, even if the Linux kernel supports SO_MARK, as it
usually does.
Updates #2331 etc
Change-Id: Iac9e4a7429c1781337e716ffc914443b7aa2869d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Clarify & verify that some DoH URLs can be sent over tailcfg
in some limited cases.
Updates #2452
Change-Id: Ibb25db77788629c315dc26285a1059a763989e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.
For DoH, the customer ID is in the URL path.
For IPv6, the IP address includes the customer ID in the lower bits.
For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.
We don't use the IP linking mechanism.
Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.
Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.
If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.
Updates #2452
Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is especially helpful as we launch newer DERPs over time, and older
clients have progressively out-of-date static DERP maps baked in. After
this, as long as the client has successfully connected once, it'll cache
the most recent DERP map it knows about.
Resolves an in-code comment from @bradfitz
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.
Updates #1543
Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Somehow I accidentally set the wrong registry value here.
It should be DisableDynamicUpdate=1 and not EnableDNSUpdate=0.
This is a regression from 545639e.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
See https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/
The Mullvad DoH servers appear to only speak HTTP/2 and
the use of a non-nil DialContext in the http.Transport
means that ForceAttemptHTTP2 must be set to true to be
able to use them.
Signed-off-by: Nahum Shalman <nahamu@gmail.com>
This works around the 2.3s delay in short name lookups when SNR is
enabled.
C:\Windows\System32\drivers\etc\hosts file. We only add known hosts that
match the search domains, and we populate the list in order of
Search Domains so that our matching algorithm mimics what Windows would
otherwise do itself if SNR was off.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Convert ParseResponse and Response to use netip.AddrPort instead of
net.IP and separate port.
Fixes#5281
Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
Like LLMNR, NetBIOS also adds resolution delays and we don't support it
anyway so just disable it on the interface.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Currently we forward unmatched queries to the default resolver on
Windows. This results in duplicate queries being issued to the same
resolver which is just wasted.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Otherwise we just keep looping over the same thing again and again.
```
dns udp query: upstream nameservers not set
dns udp query: upstream nameservers not set
dns udp query: upstream nameservers not set
```
Signed-off-by: Maisem Ali <maisem@tailscale.com>
