We used a HandleSet before when we didn't have a unique handle. But a
sessionID is a unique handle, so use that instead. Then that replaces
the other map we had.
And now we'll have a way to look up an IPN session by sessionID for
later.
Updates tailscale/corp#17859
Change-Id: I5f647f367563ec8783c643e49f93817b341d9064
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes a regression introduced with 993acf4 and released in
v1.60.0.
The regression caused us to intercept all userspace traffic to port
8080 which prevented users from exposing their own services to their
tailnet at port 8080.
Now, we only intercept traffic to port 8080 if it's bound for
100.100.100.100 or fd7a:115c:a1e0::53.
Fixes#11283
Signed-off-by: Percy Wegmann <percy@tailscale.com>
(cherry picked from commit 17cd0626f3)
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
If an app connector is also configured as an exit node, it should still
advertise discovered routes that are not covered by advertised routes,
excluding the exit node routes.
Updates tailscale/corp#16928
Signed-off-by: James Tucker <james@tailscale.com>
This change allows us to perform batch modification for new route
advertisements and route removals. Additionally, we now handle the case
where newly added routes are covered by existing ranges.
This change also introduces a new appctest package that contains some
shared functions used for testing.
Updates tailscale/corp#16833
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
If there are routes changes as a side effect of an app connector
configuration update, the connector configuration may want to reenter a
lock, so must be started asynchronously.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Control can now send down a set of routes along with the domains, and
the routes will be advertised, with any newly overlapped routes being
removed to reduce the size of the routing table.
Fixestailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
Individual route advertisements that are covered by existing routes are
no longer advertised. If an upstream returns 0.0.0.0, 127.x, and other
common unwanted addresses those are also rejected.
Updates #16425
Signed-off-by: James Tucker <james@tailscale.com>
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Due to the Sparkle preference naming convention, macsys already has a
policy key named "ApplyUpdates" that merely shows or hides the menu
item that controls if auto updates are installed, rather than directly
controlling the setting.
For other platforms, we are going to use "InstallUpdates" instead
because it seemed better than the other options that were considered.
Updates ENG-2127
Updates tailscale/corp#16247
Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for enforcing exit node LAN access, DNS and subnet
routes.
Adding new preference policies was getting repetitive, so this turns
some of the boilerplate into a table.
Updates tailscale/corp#15585
Updates ENG-2240
Change-Id: Iabd3c42b0ae120b3145fac066c5caa7fc4d67824
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Previously, policies affected the default prefs for a new profile, but
that does not affect existing profiles. This change ensures that
policies are applied whenever preferences are loaded or changed, so a
CLI or GUI client that does not respect the policies will still be
overridden.
Exit node IP is dropped from this PR as it was implemented elsewhere
in #10172.
Fixestailscale/corp#15585
Change-Id: Ide4c3a4b00a64e43f506fa1fab70ef591407663f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Adds policy keys ExitNodeID and ExitNodeIP.
Uses the policy keys to determine the exit node in preferences.
Fixestailscale/corp#15683
Signed-off-by: Claire Wang <claire@tailscale.com>
Some conditional paths may otherwise skip the hostinfo update, so kick
it off asynchronously as other code paths do.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
Control sends ExitNodeDNSResolvers when configured for IsWireGuardOnly
nodes that are to be used as the default resolver with a lower
precedence than split DNS, and a lower precedence than "Override local
DNS", but otherwise before local DNS is used when the exit node is in
use.
Neither of the below changes were problematic, but appeared so alongside
a number of other client and external changes. See tailscale/corp#14809.
Reland ea9dd8fabc.
Reland d52ab181c3.
Updates #9377
Updates tailscale/corp#14809
Signed-off-by: James Tucker <james@tailscale.com>
This PR ensures zombie foregrounds are shutdown if a new
ServeConfig is created that wipes the ongoing foreground ones.
For example, "tailscale serve|funnel reset|off" should close
all open sessions.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This would've prevented #9470.
This used to pass, fails as of 9538e9f970, and passes again
once #9472 is in.
Updates #9470
Change-Id: Iab97666f7a318432fb3b6372a177ab50c55d4697
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The initial implementation directly mirrored the behavior of Tailscale
exit nodes, where the WireGuard exit node DNS took precedence over other
configuration.
This adjusted implementation treats the WireGuard DNS
resolvers as a lower precedence default resolver than the tailnet
default resolver, and allows split DNS configuration as well.
This also adds test coverage to the existing DNS selection behavior with
respect to default resolvers and split DNS routes for Tailscale exit
nodes above cap 25. There may be some refinement to do in the logic in
those cases, as split DNS may not be working as we intend, though that
would be a pre-existing and separate issue.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have some flaky integration tests elsewhere that have no one place
to ask about the state of the world. This makes LocalBackend be that
place (as it's basically there anyway) but doesn't yet add the ForTest
accessor method.
This adds a LocalBackend.peers map[NodeID]NodeView that is
incrementally updated as mutations arrive. And then we start moving
away from using NetMap.Peers at runtime (UpdateStatus no longer uses
it now). And remove another copy of NodeView in the LocalBackend
nodeByAddr map. Change that to point into b.peers instead.
Future changes will then start streaming whole-node-granularity peer
change updates to WatchIPNBus clients, tracking statefully per client
what each has seen. This will get the GUI clients from receiving less
of a JSON storm of updates all the time.
Updates #1909
Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This enables installing default resolvers specified by
tailcfg.Node.ExitNodeDNSResolvers when the exit node is selected.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
This change delays the first flush in the /watch-ipn-bus/ handler
until after the watcher has been successfully installed on the IPN
bus. It does this by adding a new onWatchAdded callback to
LocalBackend.WatchNotifications().
Without this, the endpoint returns a 200 almost immediatly, and
only then installs a watcher for IPN events. This means there's a
small window where events could be missed by clients after calling
WatchIPNBus().
Fixestailscale/corp#8594.
Signed-off-by: salman <salman@tailscale.com>
Only the macOS/iOS clients care about it still, so we'll move it
to their repo.
But keep a test that makes sure that LocalBackend continues to
implement it so we get an early warning sign before we break
macOS/iOS.
Change-Id: I56392b740fe55b4d28468b77124c821b5c46c22b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
