So that we can use this for additional, non-NAT configuration without it
being confusing.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I1658d59c9824217917a94ee76d2d08f0a682986f
This was a holdover from the older, pre-BART days and is no longer
necessary.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I71b892bab1898077767b9ff51cef33d59c08faf8
Updates tailscale/corp#18960
Tests in corp called us using the wrong logging calls. Removed.
This is logged downstream anyway.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This configures localClient correctly during flag parsing, so that the --socket
option is effective when generating tab-completion results. For example, the
following would not connect to the system Tailscale for tab-completion results:
tailscale --socket=/tmp/tailscaled.socket switch <TAB>
Updates #3793
Signed-off-by: Paul Scott <paul@tailscale.com>
Updates tailscale/corp#18960
iOS uses Apple's NetworkMonitor to track the default interface and
there's no reason we shouldn't also use this on macOS, for the same
reasons noted in the comments for why this change was made on iOS.
This eliminates the need to load and parse the routing table when
querying the defaultRouter() in almost all cases.
A slight modification here (on both platforms) to fallback to the default
BSD logic in the unhappy-path rather than making assumptions that
may not hold. If netmon is eventually parsing AF_ROUTE and able
to give a consistently correct answer for the default interface index,
we can fall back to that and eliminate the Swift dependency.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values.
Fixes#11947
Signed-off-by: Gabe Gorelick <gabe@hightouch.io>
We had this in a different repo, but moving it here, as this a more
fitting package.
Updates #cleanup
Change-Id: I5fb9b10e465932aeef5841c67deba4d77d473d57
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also, reset it in a few more places (e.g. logout, new blank profiles,
etc.) to avoid a few more cases where a pre-existing dialPlan can cause
a new Headscale server take 10+ seconds to connect.
Updates #11938
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I3095173a5a3d9720507afe4452548491e9e45a3e
If AtomicValue[T] is used with a T that is an interface kind,
then Store may panic if different concret types are ever stored.
Fix this by always wrapping in a concrete type.
Technically, this is only needed if T is an interface kind,
but there is no harm in doing it also for non-interface kinds.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When switching profile, the server URL can change (e.g.
because of switching to a self-hosted headscale instance).
If it is not reset here, dial plans returned by old
server (e.g. tailscale control server) will be used to
connect to new server (e.g. self-hosted headscale server),
and the register request will be blocked by it until
timeout, leading to very slow profile switches.
Updates #11938 11938
Signed-off-by: Shaw Drastin <showier.drastic0a@icloud.com>
Certain device drivers (e.g. vxlan, geneve) do not properly handle
coalesced UDP packets later in the stack, resulting in packet loss.
Updates #11026
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Add documentation for GET/PATCH/PUT `api/v2/tailnet/<ID>/dns/split-dns`.
These endpoints allow for reading, partially updating, and replacing the
split DNS settings for a given tailnet.
Updates https://github.com/tailscale/corp/issues/19483
Signed-off-by: Mario Minardi <mario@tailscale.com>
Before attempting to enable IPv6 forwarding in the proxy init container
check if the relevant module is found, else the container crashes
on hosts that don't have it.
Updates#11860
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The tailscale package is in the community Alpine repo. Check if it's
commented out in `/etc/apk/repositories` and run `setup-apkrepos -c -1`
if it's not.
Fixes#11263
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Add node attribute to determine whether or not to show suggested exit
node in UI.
Updates tailscale/corp#19515
Signed-off-by: Claire Wang <claire@tailscale.com>
This fixes bugs where after using the cli to set AdvertiseRoutes users
were finding that they had to restart tailscaled before the app
connector would advertise previously learned routes again. And seems
more in line with user expectations.
Fixes#11006
Signed-off-by: Fran Bull <fran@tailscale.com>
If the controlknob to persist app connector routes is enabled, when
reconfiguring an app connector unadvertise routes that are no longer
relevant.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
If the controlknob is on.
This will allow us to remove discovered routes associated with a
particular domain.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
When an app connector is reconfigured and domains to route are removed,
we would like to no longer advertise routes that were discovered for
those domains. In order to do this we plan to store which routes were
discovered for which domains.
Add a controlknob so that we can enable/disable the new behavior.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
Lays the groundwork for the ability to persist app connectors discovered
routes, which will allow us to stop advertising routes for a domain if
the app connector no longer monitors that domain.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
Explicitly set `-H "Content-Type: application/json"` in CURL examples
for POST endpoints as the default content type used by CURL is otherwise
`application/x-www-form-urlencoded` and these endpoints expect JSON data.
Updates https://github.com/tailscale/tailscale/issues/11914
Signed-off-by: Mario Minardi <mario@tailscale.com>
cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms
* Allow users to pre-create empty state Secrets
* Add a fake internal kube client, test functionality that has dependencies on kube client operations.
* Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist
* Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed
Updates tailscale/tailscale#11170
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Modifies containerboot to wait on tailscaled process
only, not on any child process of containerboot.
Waiting on any subprocess was racing with Go's
exec.Cmd.Run, used to run iptables commands and
that starts its own subprocesses and waits on them.
Containerboot itself does not run anything else
except for tailscaled, so there shouldn't be a need
to wait on anything else.
Updates tailscale/tailscale#11593
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm working on moving all network state queries to be on
netmon.Monitor, removing old APIs.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: If0de137e0e2e145520f69e258597fb89cf39a2a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#19558
A request for the suggested exit nodes that occurs too early in the
VPN lifecycle would result in a null deref of the netmap and/or
the netcheck report. This checks both and errors out.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for tsd.System Tracker plumbing throughout tailscaled,
defensively permit all methods on Tracker to accept a nil receiver
without crashing, lest I screw something up later. (A health tracking
system that itself causes crashes would be no good.) Methods on nil
receivers should not be called, so a future change will also collect
their stacks (and panic during dev/test), but we should at least not
crash in prod.
This also locks that in with a test using reflect to automatically
call all methods on a nil receiver and check they don't crash.
Updates #11874
Updates #4136
Change-Id: I8e955046ebf370ec8af0c1fb63e5123e6282a9d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously it was both metadata about the class of warnable item as
well as the value.
Now it's only metadata and the value is per-Tracker.
Updates #11874
Updates #4136
Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
