Exclide GOARCHs including: mips, mips64, mips64le, mipsle, riscv64.
These archs are not supported by gvisor.dev/gvisor/pkg/hostarch.
Fixes: #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
Previously it would wait for all tests to run before printing anything,
instead stream the results over a channel so that they can be emitted
immediately.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously it would only print the failures without providing
more information on which package the failures from.
This commit makes it so that it prints out the package information
as well as the attempt numbers.
```
➜ tailscale.com git:(main) ✗ go run ./cmd/testwrapper ./cmd/...
ok tailscale.com/cmd/derper
ok tailscale.com/cmd/k8s-operator
ok tailscale.com/cmd/tailscale/cli
ok tailscale.com/cmd/tailscaled
=== RUN TestFlakeRun
flakytest.go:38: flakytest: issue tracking this flaky test: https://github.com/tailscale/tailscale/issues/0
flakytest_test.go:41: First run in testwrapper, failing so that test is retried. This is expected.
--- FAIL: TestFlakeRun (0.00s)
FAIL tailscale.com/cmd/testwrapper/flakytest
Attempt #2: Retrying flaky tests:
ok tailscale.com/cmd/testwrapper/flakytest
```
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Calling both mono.Now() and time.Now() is slow and
leads to unnecessary precision errors.
Instead, directly compute mono.Time relative to baseMono and baseWall.
This is the opposite calculation as mono.Time.WallTime.
Updates tailscale/corp#8427
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The panicLogWriter is too strict, and any panics that occur
get wrapped up in quotes. This makes it so that it will allow
panics to continue writing to Stderr without going through
logger.Logf.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This package contains platform-independent abstractions for fetching
information about an open TCP connection.
Updates #8413
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I236657b1060d7e6a45efc7a2f6aacf474547a2fe
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
This change updates the documentation for the fields on the location
struct.
Updates tailscale/corp#12146
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This commit updates our IP forwarding parsing logic to allow the less
common but still valid value of `2` to be parsed as `true`, which fixes
an error some users encountered.
Fixes#8375
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
Correct a minor cut-n-paste error that resulted in an invalid or
missing ping type being accepted as a disco ping.
Fixes#8457
Signed-off-by: Val <valerie@tailscale.com>
Redo the testwrapper to track and only retry flaky tests instead
of retrying the entire pkg. It also fails early if a non-flaky test fails.
This also makes it so that the go test caches are used.
Fixes#7975
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Instead of treating any lxcfs mount as an indicator that we're running
in a container, check for one of the mounts actually used by LXC
containers.
For reference, here's a list of mounts I am seeing in an LXC container:
```
$ grep lxcfs /proc/mounts
lxcfs /proc/cpuinfo fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /proc/diskstats fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /proc/loadavg fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /proc/meminfo fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /proc/stat fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /proc/swaps fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /proc/uptime fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
lxcfs /sys/devices/system/cpu/online fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0
```
Fixes#8444
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change adds Location field to HostInfo.
Location contains the option for a Country, CountryCode, City, CityCode
and a Priority. Neither of these fields are populated by default.
The Priority field is used to determine the priority an exit
node should be given for use, if the field is set. The higher the value
set, the higher priority the node should be given for use.
Updates tailscale/corp#12146
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Also switch the wrapper script to use bash not posix shell. We now
depend on bash elsewhere for saner behavior in esoteric areas, so
might as well use it everywhere for consistency.
Fixes#8425
Signed-off-by: David Anderson <danderson@tailscale.com>
As far as I can tell from the DSM documentation and known undocumented
fields, there is no 'version' field in this config file that DSM cares
about.
Updates #8232
Signed-off-by: David Anderson <danderson@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are two race conditions in output handling.
The first race condition is due to a misuse of exec.Cmd.StdoutPipe.
The documentation explicitly forbids concurrent use of StdoutPipe
with exec.Cmd.Wait (see golang/go#60908) because Wait will
close both sides of the pipe once the process ends without
any guarantees that all data has been read from the pipe.
To fix this, we allocate the os.Pipes ourselves and
manage cleanup ourselves when the process has ended.
The second race condition is because sshSession.run waits
upon exec.Cmd to finish and then immediately proceeds to call ss.Exit,
which will close all output streams going to the SSH client.
This may interrupt any asynchronous io.Copy still copying data.
To fix this, we close the write-side of the os.Pipes after
the process has finished (and before calling ss.Exit) and
synchronously wait for the io.Copy routines to finish.
Fixes#7601
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
On redhat 9 and similarly locked down systems, root user does not have
access to a users directory. This fix does not set a directory for the
incubator process and instead sets the directory when the actual process
requested by remote user is executed.
Fixes#8118
Signed-off-by: Derek Burdick <derek-burdick@users.noreply.github.com>
Adds a `Tailscale-Headers-Info` header whenever the `Tailscale-User-`
headers are filled from the HTTP proxy handler.
Planning on hooking this shorturl up to KB docs about the header
values (i.e. what's a login name vs. display name) and security
considerations to keep in mind while using these headers - notibly
that they can also be filled from external requests that do not hit
tailscaled.
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
prober uses NewRegionClient() to connect to a derper using a faked up
single-node region, but NewRegionClient() fails to connect if there is
no non-STUN only client in the region. Set the STUN only flag to false
before we call NewRegionClient() so we can monitor nodes marked as
STUN only in the default derpmap.
Updates #11492
Signed-off-by: Val <valerie@tailscale.com>
Trying to SSH when SELinux is enforced results in errors like:
```
➜ ~ ssh ec2-user@<ip>
Last login: Thu Jun 1 22:51:44 from <ip2>
ec2-user: no shell: Permission denied
Connection to <ip> closed.
```
while the `/var/log/audit/audit.log` has
```
type=AVC msg=audit(1685661291.067:465): avc: denied { transition } for pid=5296 comm="login" path="/usr/bin/bash" dev="nvme0n1p1" ino=2564 scontext=system_u:system_r:unconfined_service_t:s0 tcontext=unconfined_u:unconfined_r:unconfined_t:s0 tclass=process permissive=0
```
The right fix here would be to somehow install the appropriate context when
tailscale is installed on host, but until we figure out a way to do that
stop using the `login` cmd in these situations.
Updates #4908
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This commit continues the work from #8303, providing a method for a
tka.Authority to generate valid deeplinks for signing devices. We'll
use this to provide the necessary deeplinks for users to sign from
their mobile devices.
Updates #8302
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
