Brad Fitzpatrick
6d85a94767
net/{packet,tstun}: fix typo in test helper docs
...
Change-Id: Ifc1684fe77c7d2585e049e0dfd7340910c47a67a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2023-01-14 13:01:15 -08:00
Brad Fitzpatrick
c1a2e2c380
net/{packet,tstun},wgengine/filter: fix unknown IP protocol handling
...
01b90df2fa
added SCTP support before
(with explicit parsing for ports) and
69de3bf7bf
tried to add support for
arbitrary IP protocols (as long as the ACL permited a port of "*",
since we might not know how to find ports from an arbitrary IP
protocol, if it even has such a concept). But apparently that latter
commit wasn't tested end-to-end enough. It had a lot of tests, but the
tests made assumptions about layering that either weren't true, or
regressed since 1.20. Notably, it didn't remove the (*Filter).pre
bidirectional filter that dropped all "unknown" protocol packets both
leaving and entering, even if there were explicit protocol matches
allowing them in.
Also, don't map all unknown protocols to 0. Keep their IP protocol
number parsed so it's matchable by later layers. Only reject illegal
things.
Fixes #6423
Updates #2162
Updates #2163
Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2023-01-14 10:32:18 -08:00
James Tucker
146f51ce76
net/packet: fix filtering of short IPv4 fragments
...
The fragment offset is an 8 byte offset rather than a byte offset, so
the short packet limit is now in fragment block size in order to compare
with the offset value.
The packet flags are in the first 3 bits of the flags/frags byte, and
so after conversion to a uint16 little endian value they are at the
start, not the end of the value - the mask for extracting "more
fragments" is adjusted to match this byte.
Extremely short fragments less than 80 bytes are dropped, but fragments
over 80 bytes are now accepted.
Fixes #5727
Signed-off-by: James Tucker <james@tailscale.com>
2022-09-23 10:43:28 -07:00
Brad Fitzpatrick
a12aad6b47
all: convert more code to use net/netip directly
...
perl -i -npe 's,netaddr.IPPrefixFrom,netip.PrefixFrom,' $(git grep -l -F netaddr.)
perl -i -npe 's,netaddr.IPPortFrom,netip.AddrPortFrom,' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPPrefix,netip.Prefix,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPPort,netip.AddrPort,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IP\b,netip.Addr,g' $(git grep -l -F netaddr. )
perl -i -npe 's,netaddr.IPv6Raw\b,netip.AddrFrom16,g' $(git grep -l -F netaddr. )
goimports -w .
Then delete some stuff from the net/netaddr shim package which is no
longer neeed.
Updates #5162
Change-Id: Ia7a86893fe21c7e3ee1ec823e8aba288d4566cd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-25 21:53:49 -07:00
Brad Fitzpatrick
6a396731eb
all: use various net/netip parse funcs directly
...
Mechanical change with perl+goimports.
Changed {Must,}Parse{IP,IPPrefix,IPPort} to their netip variants, then
goimports -d .
Finally, removed the net/netaddr wrappers, to prevent future use.
Updates #5162
Change-Id: I59c0e38b5fbca5a935d701645789cddf3d7863ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-25 21:12:28 -07:00
Brad Fitzpatrick
7eaf5e509f
net/netaddr: start migrating to net/netip via new netaddr adapter package
...
Updates #5162
Change-Id: Id7bdec303b25471f69d542f8ce43805328d56c12
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-07-25 16:20:43 -07:00
Brad Fitzpatrick
e4d8d5e78b
net/packet, wgengine/netstack: remove workaround for old gvisor ECN bug
...
Fixes #2642
Change-Id: Ic02251d24a4109679645d1c8336e0f961d0cce13
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-03-26 21:24:24 -07:00
Brad Fitzpatrick
c64af5e676
wgengine/netstack: clear TCP ECN bits before giving to gvisor
...
Updates #2642
Change-Id: Ic219442a2656dd9dc99ae1dd91e907fd3d924987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2022-01-19 20:09:24 -08:00
Josh Bleecher Snyder
94fb42d4b2
all: use testingutil.MinAllocsPerRun
...
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.
This also allows us to tighten the "no allocs"
test in wgengine/filter.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-10-28 12:48:37 -07:00
Josh Bleecher Snyder
d6d1951897
net/packet: add BenchmarkString
...
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2021-05-20 20:42:18 -07:00
Brad Fitzpatrick
1eb95c7e32
net/packet, wgengine{,/filter}: remove net/packet IPProto forwarding consts
...
Only use the ones in types/ipproto now.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-20 21:45:47 -07:00
Brad Fitzpatrick
01b90df2fa
net/packet, wgengine/filter: support SCTP
...
Add proto to flowtrack.Tuple.
Add types/ipproto leaf package to break a cycle.
Server-side ACL work remains.
Updates #1516
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-03-20 21:34:13 -07:00
Brad Fitzpatrick
b560386c1a
net/packet, wgengine, tstun: add inter-node TSMP protocol for connect errors
...
This adds a new IP Protocol type, TSMP on protocol number 99 for
sending inter-tailscale messages over WireGuard, currently just for
why a peer rejects TCP SYNs (ACL rejection, shields up, and in the
future: nothing listening, something listening on that port but wrong
interface, etc)
Updates #1094
Updates tailscale/corp#1185
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2021-01-15 14:03:57 -08:00
David Anderson
cb96b14bf4
net/packet: remove the custom IP4/IP6 types in favor of netaddr.IP.
...
Upstream netaddr has a change that makes it alloc-free, so it's safe to
use in hot codepaths. This gets rid of one of the many IP types in our
codebase.
Performance is currently worse across the board. This is likely due in
part to netaddr.IP being a larger value type (4b -> 24b for IPv4,
16b -> 24b for IPv6), and in other part due to missing low-hanging fruit
optimizations in netaddr. However, the regression is less bad than
it looks at first glance, because we'd micro-optimized packet.IP* in
the past few weeks. This change drops us back to roughly where we
were at the 1.2 release, but with the benefit of a significant
code and architectural simplification.
name old time/op new time/op delta
pkg:tailscale.com/net/packet goos:linux goarch:amd64
Decode/tcp4-8 12.2ns ± 5% 29.7ns ± 2% +142.32% (p=0.008 n=5+5)
Decode/tcp6-8 12.6ns ± 3% 65.1ns ± 2% +418.47% (p=0.008 n=5+5)
Decode/udp4-8 11.8ns ± 3% 30.5ns ± 2% +157.94% (p=0.008 n=5+5)
Decode/udp6-8 27.1ns ± 1% 65.7ns ± 2% +142.36% (p=0.016 n=4+5)
Decode/icmp4-8 24.6ns ± 2% 30.5ns ± 2% +23.65% (p=0.016 n=4+5)
Decode/icmp6-8 22.9ns ±51% 65.5ns ± 2% +186.19% (p=0.008 n=5+5)
Decode/igmp-8 18.1ns ±44% 30.2ns ± 1% +66.89% (p=0.008 n=5+5)
Decode/unknown-8 20.8ns ± 1% 10.6ns ± 9% -49.11% (p=0.016 n=4+5)
pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64
Filter/icmp4-8 30.5ns ± 1% 77.9ns ± 3% +155.01% (p=0.008 n=5+5)
Filter/tcp4_syn_in-8 43.7ns ± 3% 123.0ns ± 3% +181.72% (p=0.008 n=5+5)
Filter/tcp4_syn_out-8 24.5ns ± 2% 45.7ns ± 6% +86.22% (p=0.008 n=5+5)
Filter/udp4_in-8 64.8ns ± 1% 210.0ns ± 2% +223.87% (p=0.008 n=5+5)
Filter/udp4_out-8 119ns ± 0% 278ns ± 0% +133.78% (p=0.016 n=4+5)
Filter/icmp6-8 40.3ns ± 2% 204.4ns ± 4% +407.70% (p=0.008 n=5+5)
Filter/tcp6_syn_in-8 35.3ns ± 3% 199.2ns ± 2% +464.95% (p=0.008 n=5+5)
Filter/tcp6_syn_out-8 32.8ns ± 2% 81.0ns ± 2% +147.10% (p=0.008 n=5+5)
Filter/udp6_in-8 106ns ± 2% 290ns ± 2% +174.48% (p=0.008 n=5+5)
Filter/udp6_out-8 184ns ± 2% 314ns ± 3% +70.43% (p=0.016 n=4+5)
pkg:tailscale.com/wgengine/tstun goos:linux goarch:amd64
Write-8 9.02ns ± 3% 8.92ns ± 1% ~ (p=0.421 n=5+5)
name old alloc/op new alloc/op delta
pkg:tailscale.com/net/packet goos:linux goarch:amd64
Decode/tcp4-8 0.00B 0.00B ~ (all equal)
Decode/tcp6-8 0.00B 0.00B ~ (all equal)
Decode/udp4-8 0.00B 0.00B ~ (all equal)
Decode/udp6-8 0.00B 0.00B ~ (all equal)
Decode/icmp4-8 0.00B 0.00B ~ (all equal)
Decode/icmp6-8 0.00B 0.00B ~ (all equal)
Decode/igmp-8 0.00B 0.00B ~ (all equal)
Decode/unknown-8 0.00B 0.00B ~ (all equal)
pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64
Filter/icmp4-8 0.00B 0.00B ~ (all equal)
Filter/tcp4_syn_in-8 0.00B 0.00B ~ (all equal)
Filter/tcp4_syn_out-8 0.00B 0.00B ~ (all equal)
Filter/udp4_in-8 0.00B 0.00B ~ (all equal)
Filter/udp4_out-8 16.0B ± 0% 64.0B ± 0% +300.00% (p=0.008 n=5+5)
Filter/icmp6-8 0.00B 0.00B ~ (all equal)
Filter/tcp6_syn_in-8 0.00B 0.00B ~ (all equal)
Filter/tcp6_syn_out-8 0.00B 0.00B ~ (all equal)
Filter/udp6_in-8 0.00B 0.00B ~ (all equal)
Filter/udp6_out-8 48.0B ± 0% 64.0B ± 0% +33.33% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
pkg:tailscale.com/net/packet goos:linux goarch:amd64
Decode/tcp4-8 0.00 0.00 ~ (all equal)
Decode/tcp6-8 0.00 0.00 ~ (all equal)
Decode/udp4-8 0.00 0.00 ~ (all equal)
Decode/udp6-8 0.00 0.00 ~ (all equal)
Decode/icmp4-8 0.00 0.00 ~ (all equal)
Decode/icmp6-8 0.00 0.00 ~ (all equal)
Decode/igmp-8 0.00 0.00 ~ (all equal)
Decode/unknown-8 0.00 0.00 ~ (all equal)
pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64
Filter/icmp4-8 0.00 0.00 ~ (all equal)
Filter/tcp4_syn_in-8 0.00 0.00 ~ (all equal)
Filter/tcp4_syn_out-8 0.00 0.00 ~ (all equal)
Filter/udp4_in-8 0.00 0.00 ~ (all equal)
Filter/udp4_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
Filter/icmp6-8 0.00 0.00 ~ (all equal)
Filter/tcp6_syn_in-8 0.00 0.00 ~ (all equal)
Filter/tcp6_syn_out-8 0.00 0.00 ~ (all equal)
Filter/udp6_in-8 0.00 0.00 ~ (all equal)
Filter/udp6_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-12-22 14:44:36 -08:00
Brad Fitzpatrick
d0baece5fa
go.mod: bump inet.af/netaddr to non-allocating version
2020-12-22 14:25:32 -08:00
David Anderson
04ff3c91ee
wgengine/filter: add full IPv6 support.
...
Part of #19 .
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-12 21:41:15 -08:00
David Anderson
c2cc3acbaf
net/packet: remove NewIP, offer only a netaddr constructor.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-10 22:03:47 -08:00
David Anderson
9ef39af2f2
net/packet: fix panic on invalid IHL field.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-10 20:23:54 -08:00
David Anderson
55b1221db2
net/packet: support full IPv6 decoding.
...
The packet filter still rejects all IPv6, but decodes enough from v6
packets to do something smarter in a followup.
name time/op
Decode/tcp4-8 28.8ns ± 2%
Decode/tcp6-8 20.6ns ± 1%
Decode/udp4-8 28.2ns ± 1%
Decode/udp6-8 20.0ns ± 6%
Decode/icmp4-8 21.7ns ± 2%
Decode/icmp6-8 14.1ns ± 2%
Decode/unknown-8 9.43ns ± 2%
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-10 20:23:54 -08:00
David Anderson
89894c6930
net/packet: add IPv6 source and destination IPs to Parsed.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-10 20:23:54 -08:00
David Anderson
6e52633c53
net/packet: record allocations in benchmark.
2020-11-10 02:19:55 -08:00
David Anderson
093431f5dd
net/packet: s/ParsedPacket/Parsed/ to avoid package stuttering.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 23:52:54 -08:00
David Anderson
427bf2134f
net/packet: rename from wgengine/packet.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 16:25:24 -08:00