This reverts commit 8d6793fd70.
Reason: breaks Android build (cgo/pthreads addition)
We can try again next cycle.
Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Attempt to load the xt_mark kernel module when it is not present. If the
load fails, log error information.
It may be tempting to promote this failure to an error once it has been
in use for some time, so as to avoid reaching an error with the iptables
invocation, however, there are conditions under which the two stages may
disagree - this change adds more useful breadcrumbs.
Example new output from tailscaled running under my WSL2:
```
router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2
```
Background:
There are two places to lookup modules, one is `/proc/modules` "old",
the other is `/sys/module/` "new".
There was query_modules(2) in linux <2.6, alas, it is gone.
In a docker container in the default configuration, you would get
/proc/modules and /sys/module/ both populated. lsmod may work file,
modprobe will fail with EPERM at `finit_module()` for an unpriviliged
container.
In a priviliged container the load may *succeed*, if some conditions are
met. This condition should be avoided, but the code landing in this
change does not attempt to avoid this scenario as it is both difficult
to detect, and has a very uncertain impact.
In an nspawn container `/proc/modules` is populated, but `/sys/module`
does not exist. Modern `lsmod` versions will fail to gather most module
information, without sysfs being populated with module information.
In WSL2 modules are likely missing, as the in-use kernel typically is
not provided by the distribution filesystem, and WSL does not mount in a
module filesystem of its own. Notably the WSL2 kernel supports iptables
marks without listing the xt_mark module in /sys/module, and
/proc/modules is empty.
On a recent kernel, we can ask the capabilities system about SYS_MODULE,
that will help to disambiguate between the non-privileged container case
and just being root. On older kernels these calls may fail.
Update #4329
Signed-off-by: James Tucker <james@tailscale.com>
$ tailscale debug via 0xb 10.2.0.0/16
fd7a:115c:a1e0:b1a:0🅱️a02:0/112
$ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112
site 11 (0xb), 10.2.0.0/16
Previously: 3ae701f0eb
This adds a little debug tool to do CIDR math to make converting between
those ranges easier for now.
Updates #3616
Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit changes proxy-to-grafana to report errors while polling for
tailscaled status instead of terminating at the first sign of an error.
This allows tailscale some time to come up before the proxy decides to
give up.
Signed-off-by: Blake Mizerany <blake.mizerany@gmail.com>
Fail on unsupported platforms (must be Linux or macOS tailscaled with
WIP env) or when disabled by admin (with TS_DISABLE_SSH_SERVER=1)
Updates #3802
Change-Id: I5ba191ed0d8ba4ddabe9b8fc1c6a0ead8754b286
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Remove the weird netstack -> tailssh dependency and instead have tailssh
register itself with ipnlocal when linked.
This makes tailssh.server a singleton, so we can have a global map of
all sessions.
Updates #3802
Change-Id: Iad5caec3a26a33011796878ab66b8e7b49339f29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This extracts DOH mapping of known public DNS providers in
forwarder.go into its own package, to be consumed by other repos
Signed-off-by: Jenny Zhang <jz@tailscale.com>
Usage of userspace-networking is increasing, and the aggressive GC
tuning causes a significant reduction in performance in that mode.
Signed-off-by: James Tucker <james@tailscale.com>
This conforms to the NGINX subrequest result authentication protocol[1]
using the NGINX module `ngx_http_auth_request_module`. This is based on
the example that @peterkeen provided on Twitter[2], but with several
changes to make things more tightly locked down:
* This listens over a UNIX socket instead of a TCP socket to prevent
leakage to the network
* This uses systemd socket activation so that systemd owns the socket
and can then lock down the service to the bare minimum required to do
its job without having to worry about dropping permissions
* This provides additional information in HTTP response headers that can
be useful for integrating with various services
* This has a script to automagically create debian and redhat packages
for easier distribution
This will be written about on the Tailscale blog. There is more
information in README.md.
[1]: https://docs.nginx.com/nginx/admin-guide/security-controls/configuring-subrequest-authentication/
[2]: https://github.com/peterkeen/tailscale/blob/main/cmd/nginx-auth-proxy/nginx-auth-proxy.go
Signed-off-by: Xe Iaso <xe@tailscale.com>
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)
e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:
tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112
(112 being /128 minuse the /96 v6 prefix length)
Then people in my tailnet can:
$ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....
Updates #3616, etc
RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes
Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To "automatically receive taildrop files to my Downloads directory,"
user currently has to run 'tailscale file get' in a loop. Make
it easy to do this without shell.
Updates: #2312
Signed-off-by: David Eger <david.eger@gmail.com>
In tracking down issue #4144 and reading through the netstack code in
detail, I discovered that the packet buf Clone path did not reset the
packetbuf it was getting from the sync.Pool. The fix was sent upstream
https://github.com/google/gvisor/pull/7385, and this bump pulls that in.
At this time there is no known path that this fixes, however at the time
of upstream submission this reset at least one field that could lead to
incorrect packet routing if exercised, a situation that could therefore
lead to an information leak.
Signed-off-by: James Tucker <james@tailscale.com>
In addition an envknob (TS_DEBUG_NETSTACK_LEAK_MODE) now provides access
to set leak tracking to more useful values.
Fixes#4309
Signed-off-by: James Tucker <james@tailscale.com>
* shell.nix: rename goimports to gotools
Signed-off-by: Xe <xe@tailscale.com>
* cmd/mkpkg: allow specifying description and name in flag args
Signed-off-by: Xe <xe@tailscale.com>
While we rearrange/upstream things.
gliderlabs/ssh is forked into tempfork from our prior fork
at be8b7add40
x/crypto/ssh OTOH is forked at
https://github.com/tailscale/golang-x-crypto because it was gnarlier
to vendor with various internal packages, etc.
Its git history shows where it starts (2c7772ba30643b7a2026cbea938420dce7c6384d).
Updates #3802
Change-Id: I546e5cdf831cfc030a6c42557c0ad2c58766c65f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And return an error if you use non-flag arguments.
Change-Id: I0dd6c357eb5cabd0f17020f21ba86406aea21681
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds missing file from fc12cbfcd3.
GitHub was having issues earlier and it was all green because the
checks never actually ran, but the DCO non-Actions check at least did,
so "green" and I merged, not realizing it hadn't really run anything.
Updates #3802
Change-Id: I29f605eebe5336f1f3ca28ebb78b092dd99d9fd8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a "tailscale nc" command that acts a bit like "nc", but
dials out via tailscaled via localapi.
This is a step towards a "tailscale ssh", as we'll use "tailscale nc"
as a ProxyCommand for in some cases (notably in userspace mode).
But this is also just useful for debugging & scripting.
Updates #3802
RELNOTE=tailscale nc
Change-Id: Ia5c37af2d51dd0259d5833d80264d3ad5f68446a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The best flag to use on Win7 and Win8.0 is deprecated in Win8.1, so we resolve
the flag depending on OS version info.
Fixes https://github.com/tailscale/tailscale/issues/4201
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Due to a bug in Go (golang/go#51778), cmd/go doesn't warn about your
Go version being older than the go.mod's declared Go version in that
case that package loading fails before the build starts, such as when
you use packages that are only in the current version of Go, like our
use of net/netip.
This change works around that Go bug by adding build tags and a
pre-Go1.18-only file that will cause Go 1.17 and earlier to fail like:
$ ~/sdk/go1.17/bin/go install ./cmd/tailscaled
# tailscale.com/cmd/tailscaled
./required_version.go:11:2: undefined: you_need_Go_1_18_to_compile_Tailscale
note: module requires Go 1.18
Change-Id: I39f5820de646703e19dde448dd86a7022252f75c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The docs say:
Note that while correct uses of TryLock do exist, they are rare,
and use of TryLock is often a sign of a deeper problem in a particular use of mutexes.
Rare code! Or bad code! Who can tell!
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
There is a Cosmic Background level of DERP Unreachability,
with individual nodes or regions becoming unreachable briefly
and returning a short time later. This is due to hosting provider
outages or just the Internet sloshing about.
Returning a 500 error pages a human. Being awoken at 3am for
a transient error is annoying.
For relatively small levels of badness don't page a human,
just post to Slack. If the outage impacts a significant fraction
of the DERP fleet, then page a human.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
It includes a fix to allow us to use Go 1.18.
We can now remove our Tailscale-only build tags.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The certstore code is impacted by golang/go#51726.
The Tailscale Go toolchain fork contains a temporary workaround,
so it can compile it. Once the upstream toolchain can compile certstore,
presumably in Go 1.18.1, we can revert this change.
Note that depaware runs with the upstream toolchain.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
A new flag --conflict=(skip|overwrite|rename) lets users specify
what to do when receiving files that match a same-named file in
the target directory.
Updates #3548
Signed-off-by: David Eger <david.eger@gmail.com>
Still not sure the exact rules of how/when/who's supposed to set
these, but this works for now on making them match. Baby steps.
Will research more and adjust later.
Updates #4146 (but not enough to fix it, something's still wrong)
Updates #3802
Change-Id: I496d8cd7e31d45fe9ede88fc8894f35dc096de67
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
