This reverts commit e3dec086e6.
Going to reuse Meta instead as that is already exported.
Updates tailscale/corp#1297
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Fixestailscale/corp#19979
A build with version number 275 was uploaded to the App Store without bumping OSS first. The presence of that build is causing any 274.* build to be rejected. To address this, added -1 to the year component, which means new builds will use the 275.* prefix.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
At least in the case of dialing a Tailscale IP.
Updates #4529
Change-Id: I9fd667d088a14aec4a56e23aabc2b1ffddafa3fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixes tailscale/corp#18441
For a few days, IsMacAppStore() has been returning `false` on App Store builds (IPN-macOS target in Xcode).
I regressed this in #11369 by introducing logic to detect the sandbox by checking for the APP_SANDBOX_CONTAINER_ID environment variable. I thought that was a more robust approach instead of checking the name of the executable. However, it appears that on recent macOS versions this environment variable is no longer getting set, so we should go back to the previous logic that checks for the executable path, or HOME containing references to macsys.
This PR also adds additional checks to the logic by also checking XPC_SERVICE_NAME in addition to HOME where possible. That environment variable is set inside the network extension, either macos or macsys and is good to look at if for any reason HOME is not set.
Updates ENG-2848
We can safely disable the App Sandbox for our macsys GUI, allowing us to use `tailscale ssh` and do a few other things that we've wanted to do for a while. This PR:
- allows Tailscale SSH to be used from the macsys GUI binary when called from a CLI
- tweaks the detection of client variants in prop.go, with new functions `IsMacSys()`, `IsMacSysApp()` and `IsMacAppSandboxEnabled()`
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Synology requires version numbers are within int32 range. This
change updates the version logic to keep things closer within the
range, and errors on building when the range is exceeded.
Updates #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This is useful to build local binaries with custom versions to test
version-specific logic (like updates).
Updates https://github.com/tailscale/corp/issues/16703
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On `tailscale set --auto-update`, set the Sparkle plist option for it.
Also make macsys report not supporting auto-updates over c2n, since they
will be triggered by Sparkle locally.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In the sandboxed app from the app store, we cannot check
`/Library/Preferences/com.apple.commerce.plist` or run `softwareupdate`.
We can at most print a helpful message and open the app store page.
Also, reenable macsys update function to mark it as supporting c2n
updates. macsys support in `tailscale update` was fixed.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Similar to Arch support, use the latest version info from the official
`apk` repo and don't offer explicit track or version switching.
Add detection for Alpine Linux in version/distro along the way.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Current code will set the "dirty" field of VersionInfo always "true"
if vcs.modified flag is there. No matter whether the flag is "true" or
"false". It will make sense to set this field due to vcs.modified
value, not only the existence of the key.
Signed-off-by: Chenyang Gao <gps949@outlook.com>
I thought our versioning scheme would make go.mod include a commit hash
even on stable builds. I was wrong. Fortunately, the rest of this code
wants anything that 'git rev-parse' understands (to convert it into a full
git hash), and tags qualify.
Signed-off-by: David Anderson <danderson@tailscale.com>
WSL has started to set the eth0 default route interface default to 1280
MTU, which is too low to carry 1280 byte packets from tailscale0 once
wrapped in WireGuard. The change down to 1280 is very likely smaller
than necessary for almost all users. We can not easily determine the
ideal MTU, but if all the preconditions match, we raise the MTU to 1360,
which is just enough for Tailscale traffic to work.
Updates #4833
Updates #7346
Signed-off-by: James Tucker <james@tailscale.com>
With this change, you can collect version info from either a git
checkout of the tailscale.com Go module (this repo), or a git
checkout of a repo that imports the tailscale.com Go module.
Signed-off-by: David Anderson <danderson@tailscale.com>
Before (note attempted use of absent date and commit hash):
"short": "1.37.0-dev",
"long": "1.37.0-dev-t",
After:
"short": "1.37.0-ERR-BuildInfo",
"long": "1.37.0-ERR-BuildInfo",
Signed-off-by: David Anderson <danderson@tailscale.com>
Commit 59c254579e moved a lot of work
from functions that could be eliminated at compile time (because
tests against runtime.GOOS are compile-time constant), into code
that must always run before main().
So, revert that, and instead optimize the package only by moving the
remaining string processing code behind sync.Onces.
Signed-off-by: David Anderson <danderson@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Add `tailscale version --json` JSON output mode. This will be used
later for a double-opt-in (per node consent like Tailscale SSH +
control config) to let admins do remote upgrades via `tailscale
update` via a c2n call, which would then need to verify the
cmd/tailscale found on disk for running tailscale update corresponds
to the running tailscaled, refusing if anything looks amiss.
Plus JSON output modes are just nice to have, rather than parsing
unstable/fragile/obscure text formats.
Updates #6995
Updates #6907
Change-Id: I7821ab7fbea4612f4b9b7bdc1be1ad1095aca71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Go now includes the GOROOT bin directory in $PATH while running tests
and generate, so it is no longer necessary to construct a path using
runtime.GOROOT().
Fixes#6689
Signed-off-by: James Tucker <james@tailscale.com>
Allows a dev built to provide GitCommit and have the short hash
computed correctly, even if the Go embedded build info lacks a
git commit.
Signed-off-by: David Anderson <dave@natulte.net>
Resolves a TODO in the code noted while discussing QNAP defaults.
Tested on DSM6 and DSM7.
Change-Id: Icce03ff41fafd7b3a358cfee16f2ed13d5cc3c5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was previously only invoked from the CLI, which only runs from the
main .app. However, starting with #6022 we also invoke it from the
network extension.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal here is to
1. make it so that the number doesn't diverge between the various places
we had it defined
2. not define the number in corp, only in oss
Signed-off-by: Maisem Ali <maisem@tailscale.com>
