Terminating traffic to IPs which are not the native IPs of the node requires
the netstack subsystem to intercept trafic to an IP it does not consider local.
This PR switches on such interception. In addition to supporting such termination,
this change will also enable exit nodes and subnet routers when running in
userspace mode.
DO NOT MERGE until 1.52 is cut.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates: https://github.com/tailscale/corp/issues/15038
Misc cleanups and things noticed while working on #7894 and pulled out
of a separate change. Submitting them on their own to not distract
from later changes.
Updates #7894
Change-Id: Ie9abc8b88f121c559aeeb7e74db2aa532eb84d3d
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new integration test with two nodes where the first gets a
incremental MapResponse (with only PeersRemoved set) saying that the
second node disappeared.
This extends the testcontrol package to support sending raw
MapResponses to nodes.
Updates #1909
Change-Id: Iea0c25c19cf0d72b52dba5a46d01b5cc87b9b39d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We use it a number of places in different repos. Might as well make
one. Another use is coming.
Updates #cleanup
Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed that failed tests were leaving aroudn stray tailscaled processes
on macOS at least.
To repro, add this to tstest/integration:
func TestFailInFewSeconds(t *testing.T) {
t.Parallel()
time.Sleep(3 * time.Second)
os.Exit(1)
t.Fatal("boom")
}
Those three seconds let the other parallel tests (with all their
tailscaled child processes) start up and start running their tests,
but then we violently os.Exit(1) the test driver and all the children
were kept alive (and were spinning away, using all available CPU in
gvisor scheduler code, which is a separate scary issue)
Updates #cleanup
Change-Id: I9c891ed1a1ec639fb2afec2808c04dbb8a460e0e
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* We update wingoes to pick up new version information functionality
(See pe/version.go in the https://github.com/dblohm7/wingoes repo);
* We move the existing LogSupportInfo code (including necessary syscall
stubs) out of util/winutil into a new package, util/osdiag, and implement
the public LogSupportInfo function may be implemented for other platforms
as needed;
* We add a new reason argument to LogSupportInfo and wire that into
localapi's bugreport implementation;
* We add module information to the Windows implementation of LogSupportInfo
when reason indicates a bugreport. We enumerate all loaded modules in our
process, and for each one we gather debug, authenticode signature, and
version information.
Fixes#7802
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Without this, the peer fails to do anything over the PeerAPI if it
has a masquerade address.
```
Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses
```
Updates #8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes `omitempty` actually work, and saves bytes in each map response.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This splits Prometheus metric handlers exposed by tsweb into two
modules:
- `varz.Handler` exposes Prometheus metrics generated by our expvar
converter;
- `promvarz.Handler` combines our expvar-converted metrics and native
Prometheus metrics.
By default, tsweb will use the promvarz handler, however users can keep
using only the expvar converter. Specifically, `tailscaled` now uses
`varz.Handler` explicitly, which avoids a dependency on the
(heavyweight) Prometheus client.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
WinTun is installed lazily by tailscaled while it is running as LocalSystem.
Based upon what we're seeing in bug reports and support requests, removing
WinTun as a lesser user may fail under certain Windows versions, even when that
user is an Administrator.
By adding a user-defined command code to tailscaled, we can ask the service to
do the removal on our behalf while it is still running as LocalSystem.
* The uninstall code is basically the same as it is in corp;
* The command code will be sent as a service control request and is protected by
the SERVICE_USER_DEFINED_CONTROL access right, which requires Administrator.
I'll be adding follow-up patches in corp to engage this functionality.
Updates https://github.com/tailscale/tailscale/issues/6433
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
tailscaled on Windows had two entirely separate start-up paths for running
as a service vs in the foreground. It's been causing problems for ages.
This unifies the two paths, making them be the same as the path used
for every other platform.
Also, it uses the new async LocalBackend support in ipnserver.Server
so the Server can start serving HTTP immediately, even if tun takes
awhile to come up.
Updates #6535
Change-Id: Icc8c4f96d4887b54a024d7ac15ad11096b5a58cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 1 of de-special-casing of Windows and letting the
LocalAPI HTTP server start serving immediately, even while the rest of
the world (notably the Engine and its TUN device) are being created,
which can take a few to dozens of seconds on Windows.
With this change, the ipnserver.New function changes to not take an
Engine and to return immediately, not returning an error, and let its
Run run immediately. If its ServeHTTP is called when it doesn't yet
have a LocalBackend, it returns an error. A TODO in there shows where
a future handler will serve status before an engine is available.
Future changes will:
* delete a bunch of tailscaled_windows.go code and use this new API
* add the ipnserver.Server ServerHTTP handler to await the engine
being available
* use that handler in the Windows GUI client
Updates #6522
Change-Id: Iae94e68c235e850b112a72ea24ad0e0959b568ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This patch removes the crappy, half-backed COM initialization used by `go-ole`
and replaces that with the `StartRuntime` function from `wingoes`, a library I
have started which, among other things, initializes COM properly.
In particular, we should always be initializing COM to use the multithreaded
apartment. Every single OS thread in the process becomes implicitly initialized
as part of the MTA, so we do not need to concern ourselves as to whether or not
any particular OS thread has initialized COM. Furthermore, we no longer need to
lock the OS thread when calling methods on COM interfaces.
Single-threaded apartments are designed solely for working with Win32 threads
that have a message pump; any other use of the STA is invalid.
Fixes https://github.com/tailscale/tailscale/issues/3137
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Centralize the fake GOOS stuff, start to use it more. To be used more
in the future.
Change-Id: Iabacfbeaf5fca0b53bf4d5dbcdc0367f05a205f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
