When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, the "RunExitNode" policy merely controlled the visibility of
the "run as exit node" menu item, not the setting itself. This migrates
that setting to a preference option named "AdvertiseExitNode".
Updates ENG-2138
Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Due to the Sparkle preference naming convention, macsys already has a
policy key named "ApplyUpdates" that merely shows or hides the menu
item that controls if auto updates are installed, rather than directly
controlling the setting.
For other platforms, we are going to use "InstallUpdates" instead
because it seemed better than the other options that were considered.
Updates ENG-2127
Updates tailscale/corp#16247
Change-Id: Ia6a125beb6b4563d380c6162637ce4088f1117a0
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for enforcing exit node LAN access, DNS and subnet
routes.
Adding new preference policies was getting repetitive, so this turns
some of the boilerplate into a table.
Updates tailscale/corp#15585
Updates ENG-2240
Change-Id: Iabd3c42b0ae120b3145fac066c5caa7fc4d67824
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Previously, policies affected the default prefs for a new profile, but
that does not affect existing profiles. This change ensures that
policies are applied whenever preferences are loaded or changed, so a
CLI or GUI client that does not respect the policies will still be
overridden.
Exit node IP is dropped from this PR as it was implemented elsewhere
in #10172.
Fixestailscale/corp#15585
Change-Id: Ide4c3a4b00a64e43f506fa1fab70ef591407663f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Adds policy keys ExitNodeID and ExitNodeIP.
Uses the policy keys to determine the exit node in preferences.
Fixestailscale/corp#15683
Signed-off-by: Claire Wang <claire@tailscale.com>
Adds AllowedIPs to PeerStatus, allowing for easier lookup of the
routes allowed to be routed to a node. Will be using the AllowedIPs
of the self node from the web client interface to display approval
status of advertised routes.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
To be consistent with the formatting of other warnings, pass available
update health message instead of handling ClientVersion in he CLI.
Fixes#10312
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This PR starts to persist the NetMap tailnet name in SetPrefs so that tailscaled
clients can use this value to disambiguate fast user switching from one tailnet
to another that are under the same exact login. We will also try to backfill
this information during backend starts and profile switches so that users don't
have to re-authenticate their profile. The first client to use this new
information is the CLI in 'tailscale switch -list' which now uses text/tabwriter
to display the ID, Tailnet, and Account. Since account names are ambiguous, we
allow the user to pass 'tailscale switch ID' to specify the exact tailnet they
want to switch to.
Updates #9286
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.
Updates #3363
Updates tailscale/corp#396
Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a new sync.Mutex field to the webClient struct, rather than
using the general LocalBackend mutex. Since webClientGetOrInit
(previously WebClientInit) gets called on every connection, we
want to avoid holding the lock on LocalBackend just to check if
the server is initialized.
Moves all web_client.go funcs over to using the webClient.mu field.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Now that 1.54 has released, and the new web client will be included in
1.56, we can remove the need for the node capability. This means that
all 1.55 unstable builds, and then eventually the 1.56 build, will work
without setting the node capability.
The web client still requires the "webclient" user pref, so this does
NOT mean that the web client will be on by default for all devices.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Simply reading the taildrop directory can pop up security dialogs
on platforms like macOS. Avoid this by only performing garbage collection
of partial and deleted files after the first received taildrop file,
which would have prompted the security dialog window.
Updates tailscale/corp#14772
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This change exposes SilentDisco as a control knob, and plumbs it down to
magicsock.endpoint. No changes are being made to magicsock.endpoint
disco behavior, yet.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some conditional paths may otherwise skip the hostinfo update, so kick
it off asynchronously as other code paths do.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
The local web client has the same characteristic as tailscale serve, in
that it needs a local listener to allow for connections from the local
machine itself when running in kernel networking mode.
This change renames and adapts the existing serveListener to allow it to
be used by the web client as well.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
As part of tailnet-lock netmap processing, the LocalBackend mutex
is unlocked so we can potentially make a network call. Its possible
(during shutdown or while the control client is being reset) for
b.cc to become nil before the lock is picked up again.
Fixes: #9554
Signed-off-by: Tom DNetto <tom@tailscale.com>
App connectors handle DNS requests for app domains over PeerAPI,
but a safety check verifies the requesting peer has at least permission
to send traffic to 0.0.0.0:53 (or 2000:: for IPv6) before handling the DNS
request. The correct filter rules are synthesized by the coordination server
and sent down, but the address needs to be part of the 'local net' for the
filter package to even bother checking the filter rules, so we set them here.
See: https://github.com/tailscale/corp/issues/11961 for more information.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates: ENG-2405
Require that requests to servers in manage mode are made to the
Tailscale IP (either ipv4 or ipv6) or quad-100. Also set various
security headers on those responses. These might be too restrictive,
but we can relax them as needed.
Allow requests to /ok (even in manage mode) with no checks. This will be
used for the connectivity check from a login client to see if the
management client is reachable.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
if the user pref and nodecap for the new web client are enabled, serve
the client over requests to 100.100.100.100. Today, that is just a
static page that lists the local Tailcale IP addresses.
For now, this will render the readonly full management client, with an
"access" button that sends the user through check mode. After
completing check mode, they will still be in the read-only view, since
they are not accessing the client over Tailscale.
Instead, quad100 should serve the lobby client that has a "manage"
button that will open the management client on the Tailscale IP (and
trigger check mode). That is something we'll fix in a subsequent PR in
the web client code itself.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
The design changed during integration and testing, resulting in the
earlier implementation growing in the appc package to be intended now
only for the sniproxy implementation. That code is moved to it's final
location, and the current App Connector code is now renamed.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
Now uses webClientAtomicBool as the source of truth for whether the web
client should be running in tailscaled, with it updated when either the
RunWebClient pref or CapabilityPreviewWebClient node capability changes.
This avoids requiring holding the LocalBackend lock on each call to
ShouldRunWebClient to check for the CapabilityPreviewWebClient value.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The AppConnector is now configured by the mapcap from the control plane.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
An EmbeddedAppConnector is added that when configured observes DNS
responses from the PeerAPI. If a response is found matching a configured
domain, routes are advertised when necessary.
The wiring from a configuration in the netmap capmap is not yet done, so
while the connector can be enabled, no domains can yet be added.
Updates tailscale/corp#15437
Signed-off-by: James Tucker <james@tailscale.com>
WebClientShutdown tries to acquire the b.mu lock, so run it in a go
routine so that it can finish shutdown after setPrefsLockedOnEntry is
finished. This is the same reason b.sshServer.Shutdown is run in a go
routine.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
For consistency and clarity around what the LocalBackend.web field
is used for.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
instead of starting a separate server listening on a particular port,
use the TCPHandlerForDst method to intercept requests for the special
web client port (currently 5252, probably configurable later).
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This is not currently exposed as a user-settable preference through
`tailscale up` or `tailscale set`. Instead, the preference is set when
turning the web client on and off via localapi. In a subsequent commit,
the pref will be used to automatically start the web client on startup
when appropriate.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
It would end up resetting whatever hostinfo we had constructed
and leave the backend statemachine in a broken state.
This fixes that by storing the PushDeviceToken on the LocalBackend
and populating it on Hostinfo before passing it to controlclient.
Updates tailscale/corp#8940
Updates tailscale/corp#15367
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The value being passed was the same as whats on b.hostinfo, so just
use that directly.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a check to prevent changes to ServeConfig if tailscaled
is run with a Locked config.
Missed in 1fc3573446.
Updates #1412
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Ensure that when a userspace proxy config is reloaded,
connections for any removed proxies are safely closed
Updates tailscale/tailscale#9725
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
