Commit Graph

6271 Commits

Author SHA1 Message Date
Brad Fitzpatrick
b62b07bc2d ipn: jack up the MaxMessageSize from 1MB to 10MB
hello.ipn.dev has a 2.5MB network map
2020-08-06 15:42:23 -07:00
Dmytro Shynkevych
cb01058a53
wgengine: stop giving tsdns a buffer that will be reused
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-06 18:11:50 -04:00
Brad Fitzpatrick
9a346fd8b4 wgengine,magicsock: fix two lazy wireguard config issues
1) we weren't waking up a discoEndpoint that once existed and
   went idle for 5 minutes and then got a disco message again.

2) userspaceEngine.noteReceiveActivity had a buggy check; fixed
   and added a test
2020-08-06 15:02:29 -07:00
Dmytro Shynkevych
78c2e1ff83
tsdns: implement reverse DNS lookups, canonicalize names everywhere. (#640)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-06 14:25:28 -04:00
Brad Fitzpatrick
41c4560592 control/controlclient: remove unused NetworkMap.UAPI method
And remove last remaining use of wgcfg.ToUAPI in a test's debug
output; replace it with JSON.
2020-08-06 10:30:18 -07:00
Brad Fitzpatrick
cff737786e wgengine/magicsock: fix lazy config deadlock, document more lock ordering
This removes the atomic bool that tried to track whether we needed to acquire
the lock on a future recursive call back into magicsock. Unfortunately that
hack doesn't work because we also had a lock ordering issue between magicsock
and userspaceEngine (see issue). This documents that too.

Fixes #644
2020-08-06 08:43:48 -07:00
Brad Fitzpatrick
43bc86588e wgengine/monitor: log RTM_DELROUTE details, fix format strings
Updates #643
2020-08-05 20:44:05 -07:00
Brad Fitzpatrick
2bd9ad4b40 wgengine: fix deadlock between engine and magicsock 2020-08-05 16:37:15 -07:00
Brad Fitzpatrick
5db529a655 logpolicy: upload early logpolicy output, log where we decide to write logs
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-08-05 15:04:28 -07:00
Dmytro Shynkevych
934c63115e
ipn: put Magic DNS domains first
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-04 20:13:30 -04:00
Brad Fitzpatrick
7c38db0c97 wgengine/magicsock: don't deadlock on pre-disco Endpoints w/ lazy wireguard configs
Fixes tailscale/tailscale#637
2020-08-04 17:06:05 -07:00
Josh Bleecher Snyder
a16a793605 net/interfaces: use syscalls to find private gateway IP address
iOS doesn't let you run subprocesses,
which means we can't use netstat to get routing information.
Instead, use syscalls and grub around in the results.
We keep the old netstat version around,
both for use in non-cgo builds,
and for use testing the syscall-based version.

Note that iOS doesn't ship route.h,
so we include a copy here from the macOS 10.15 SDK
(which is itself unchanged from the 10.14 SDK).

I have tested manually that this yields the correct
gateway IP address on my own macOS and iOS devices.
More coverage would be most welcome.

Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
2020-08-04 15:45:56 -07:00
Mike Kramlich
08949d4ef1 --advertise-routes option enabled in Mac tailscale CLI; it checks for IP forwarding enabled
Signed-off-by: Mike Kramlich <groglogic@gmail.com>
2020-08-04 10:49:34 -07:00
Brad Fitzpatrick
4987a7d46c wgengine/magicsock: when hard NAT, add stun-ipv4:static-port as candidate
If a node is behind a hard NAT and is using an explicit local port
number, assume they might've mapped a port and add their public IPv4
address with the local tailscaled's port number as a candidate endpoint.
2020-08-04 09:48:34 -07:00
Brad Fitzpatrick
bfcb0aa0be wgengine/magicsock: deflake tests, Close deadlock again
Better fix than 37903a9056

Fixes tailscale/corp#533
2020-08-04 09:36:38 -07:00
David Anderson
c3467fbadb version: adjust to a pure semver version number, per bradfitz's proposal.
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-08-03 12:49:42 -07:00
Brad Fitzpatrick
6298018704 control/controlclient: print disco keys NetworkMap diffs (debug change only)
NetworkMap text diffs being empty were currently used to short-circuit
calling magicsock's SetNetworkMap (via Engine.SetNetworkMap), but that
went away in c7582dc2 (0.100.0-230)

Prior to c7582dc2 (notably, in 0.100.0-225 and below, down to
0.100.0), a change in only disco key (as when a node restarts) but
without endpoint changes (as would happen for a client not behind a
NAT with random ports) could result in a "netmap diff: (none)" being
printed, as well as Engine.SetNetworkMap being skipped, leading to
broken discovery endpoints.

c7582dc2 fixed the Engine.SetNetworkMap skippage.

This change fixes the "netmap diff: (none)" print so we'll actually see when a peer
restarts with identical endpoints but a new discovery key.
2020-08-03 10:03:01 -07:00
Brad Fitzpatrick
da3b50ad88 wgengine/filter: omit logging for all v6 multicast, remove debug panic :( 2020-08-01 12:40:32 -07:00
David Anderson
9e26ffecf8 cmd/tailscaled: ignore SIGPIPE.
SIGPIPE can be generated when CLIs disconnect from tailscaled. This
should not terminate the process.

Signed-off-by: David Anderson <danderson@tailscale.com>
2020-07-31 19:12:45 -07:00
David Anderson
d64de1ddf7 Revert "cmd/tailscaled: exit gracefully on SIGPIPE"
tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't
shut down in that case.

This reverts commit 43b271cb26.

Signed-off-by: David Anderson <danderson@tailscale.com>
2020-07-31 19:12:45 -07:00
David Anderson
358cd3fd92 ipn: fix incorrect change tracking for packet filter.
ORder of operations to trigger a problem:
 - Start an already authed tailscaled, verify you can ping stuff.
 - Run `tailscale up`. Notice you can no longer ping stuff.

The problem is that `tailscale up` stops the IPN state machine before
restarting it, which zeros out the packet filter but _not_ the packet
filter hash. Then, upon restarting IPN, the uncleared hash incorrectly
makes the code conclude that the filter doesn't need updating, and so
we stay with a zero filter (reject everything) for ever.

The fix is simply to update the filterHash correctly in all cases,
so that running -> stopped -> running correctly changes the filter
at every transition.

Signed-off-by: David Anderson <danderson@tailscale.com>
2020-07-31 19:12:45 -07:00
Dmytro Shynkevych
28e52a0492
all: dns refactor, add Proxied and PerDomain flags from control (#615)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-07-31 16:27:09 -04:00
Dmytro Shynkevych
43b271cb26
cmd/tailscaled: exit gracefully on SIGPIPE
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-07-31 16:02:42 -04:00
Brad Fitzpatrick
3e493e0417 wgengine: fix lazy wireguard config bug on sent packet minute+ later
A comparison operator was backwards.

The bad case went:

* device A send packet to B at t=1s
* B gets added to A's wireguard config
* B gets packet

(5 minutes pass)

* some other activity happens, causing B to expire
  to be removed from A's network map, since it's
  been over 5 minutes since sent or received activity
* device A sends packet to B at t=5m1s
* normally, B would get added back, but the old send
  time was not zero (we sent earlier!) and the time
  comparison was backwards, so we never regenerated
  the wireguard config.

This also refactors the code for legibility and moves constants up
top, with comments.
2020-07-31 12:56:37 -07:00
Brad Fitzpatrick
c253d4f948 net/interfaces: don't try to fork on iOS in likelyHomeRouterIPDarwin
No subprocesses allowed on iOS. Will need to do this differently later.
2020-07-31 10:35:15 -07:00
Dmytro Shynkevych
8c850947db
router: split off sandboxed path from router_darwin (#624)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-07-31 01:10:14 -04:00
Brad Fitzpatrick
cb970539a6 wgengine/magicsock: remove TODO comment that's no longer applicable 2020-07-30 21:33:37 -07:00
David Crawshaw
92e9a5ac15 tailscaled.service: use default restart limiting
It appears that systemd has sensible defaults for limiting
crash loops:

	DefaultStartLimitIntervalSec=10s
	DefaultStartLimitBurst=5

Remove our insta-restart configuration so that it works.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2020-07-31 12:55:07 +10:00
Brad Fitzpatrick
915f65ddae wgengine/magicsock: stop disco activity on IPN stop
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-07-30 14:01:33 -07:00
Brad Fitzpatrick
c180abd7cf wgengine/magicsock: merge errClosed and errConnClosed 2020-07-30 13:59:30 -07:00
Brad Fitzpatrick
7cc8fcb784 wgengine/filter: remove leftover debug knob that staticcheck doesn't like 2020-07-30 11:21:37 -07:00
Brad Fitzpatrick
b4d97d2532 wgengine/filter: fix IPv4 IGMP spam omission, also omit ff02::16 spam
And add tests.

Fixes #618
Updates #402
2020-07-30 11:00:20 -07:00
Brad Fitzpatrick
ff8c8db9d3 cmd/tailscaled: log on shutdown signal 2020-07-30 08:49:17 -07:00
Brad Fitzpatrick
2072dcc127 version: revert the filepath change from earlier commit
f81233524f changed a use of package 'path' to 'filepath'.
Restore it back to 'path', with a comment.

Also, use the os.Executable-based fallback name in the case where the
binary itself doesn't have Go module information. That was overlooked in
the original code.
2020-07-30 08:03:33 -07:00
Brad Fitzpatrick
6013462e9e logpolicy: remove inaccurate comment, conditional tryFixLogStateLocation call
What I was probably actually hitting was exe caching issues where the
binary was updated on a SMB shared drive and I tried to run it with
the GUI exe still open, so Windows blends the two pages together and
causes all sorts of random corruption. I didn't know about that at the time.

Now, just call tryFixLogStateLocation unconditionally. The func itself will
bail out early on non-applicable OSes. (And rearrange it to return even a bit
earlier.)
2020-07-30 07:47:19 -07:00
Avery Pennarun
60c00605d3 ipn/setClientStatus: fix inverted prefsChanged check.
We need to emit Prefs when it *has* changed, not when it hasn't.

Test is added in our e2e test, separately.

Fixes: #620

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2020-07-30 04:52:58 -04:00
Avery Pennarun
f81233524f version/cmdname: s/path/filepath/ and fix version.ReadExe() fallback.
We were using the Go 'path' module, which apparently doesn't handle
backslashes correctly. path/filepath does.

However, the main bug turned out to be that we were not calling .Base()
on the path if version.ReadExe() fails, which it seems to do at least
on Windows 7. As a result, our logfile persistence was not working on
Windows, and logids would be regenerated on every restart.

Affects: #620

Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2020-07-30 04:52:20 -04:00
Dmytro Shynkevych
2ce2b63239
router: stop iOS subprocess sandbox violations (#617)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-07-29 21:09:18 -04:00
Dmytro Shynkevych
154d1cde05
router: reload systemd-resolved after changing /etc/resolv.conf (#619)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-07-29 20:57:25 -04:00
Brad Fitzpatrick
cbf71d5eba ipn/ipnserver: fix bug in earlier commit where conn can be stranded
If a connection causes getEngine to transition from broken to fixed,
that connection was getting lost.
2020-07-29 17:46:58 -07:00
Brad Fitzpatrick
b3fc61b132 wgengine: disable wireguard config trimming for now except iOS w/ many peers
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-07-29 16:29:30 -07:00
Brad Fitzpatrick
9ff5b380cb ipn/ipnserver: staticcheck is not wrong
shamecube.gif
2020-07-29 15:15:05 -07:00
Brad Fitzpatrick
4aba86cc03 ipn/ipnserver: make Engine argument a func that tries again for each connection
So a backend in server-an-error state (as used by Windows) can try to
create a new Engine again each time somebody re-connects, relaunching
the GUI app.

(The proper fix is actually fixing Windows issues, but this makes things better
in the short term)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-07-29 14:33:33 -07:00
Brad Fitzpatrick
d55fdd4669 wgengine/magicsock: update, flesh out a TODO 2020-07-29 12:59:25 -07:00
Brad Fitzpatrick
d96d26c22a wgengine/filter: don't spam logs on dropped outgoing IPv6 ICMP or IPv4 IGMP
The OS (tries) to send these but we drop them. No need to worry the
user with spam that we're dropping it.

Fixes #402

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-07-29 08:32:55 -07:00
Dmytro Shynkevych
c7582dc234
ipn: fix netmap change tracking and dns map generation (#609)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-07-28 21:47:23 -04:00
Brad Fitzpatrick
3e3c24b8f6 wgengine/packet: add IPVersion field, don't use IPProto to note version
As prep for IPv6 log spam fixes in a future change.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-07-28 16:29:28 -07:00
Brad Fitzpatrick
91d95dafd2 control/controlclient: remove an 'unexpected' log that no longer is
Fixes #611
2020-07-28 15:13:34 -07:00
Brad Fitzpatrick
77cad13c70 portlist: avoid syscall audit violation logspam on Android
If we don't have access, don't try, don't log, don't continue trying.

Fixes #521
2020-07-28 13:21:42 -07:00
Brad Fitzpatrick
84f2320972 go.sum: update 2020-07-28 11:49:56 -07:00