This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere.
Extract the default into a function that can apply this centrally and
use it everywhere.
Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL
happy when using converted values.
Updates #5915
Signed-off-by: James Tucker <james@tailscale.com>
WSL has started to set the eth0 default route interface default to 1280
MTU, which is too low to carry 1280 byte packets from tailscale0 once
wrapped in WireGuard. The change down to 1280 is very likely smaller
than necessary for almost all users. We can not easily determine the
ideal MTU, but if all the preconditions match, we raise the MTU to 1360,
which is just enough for Tailscale traffic to work.
Updates #4833
Updates #7346
Signed-off-by: James Tucker <james@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Adjust the expected system output by removing the unsupported mask
component including and after the slash in expected output like:
fwmask 0xabc/0xdef
This package's tests now pass in an Alpine container when the 'go' and
'iptables' packages are installed (and run as privileged so /dev/net/tun
exists).
Fixes#5928
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id1a3896282bfa36b64afaec7a47205e63ad88542
This patch removes the crappy, half-backed COM initialization used by `go-ole`
and replaces that with the `StartRuntime` function from `wingoes`, a library I
have started which, among other things, initializes COM properly.
In particular, we should always be initializing COM to use the multithreaded
apartment. Every single OS thread in the process becomes implicitly initialized
as part of the MTA, so we do not need to concern ourselves as to whether or not
any particular OS thread has initialized COM. Furthermore, we no longer need to
lock the OS thread when calling methods on COM interfaces.
Single-threaded apartments are designed solely for working with Win32 threads
that have a message pump; any other use of the STA is invalid.
Fixes https://github.com/tailscale/tailscale/issues/3137
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The health package was turning into a rando dumping ground. Make a new
Warnable type instead that callers can request an instance of, and
then Set it locally in their code without the health package being
aware of all the things that are warnable. (For plenty of things the
health package will want to know details of how Tailscale works so it
can better prioritize/suppress errors, but lots of the warnings are
pretty leaf-y and unrelated)
This just moves two of the health warnings. Can probably move more
later.
Change-Id: I51e50e46eb633f4e96ced503d3b18a1891de1452
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Noticed when testing FUS on tailscale-on-macOS, that routing would break
completely when switching between profiles. However, it would start working
again when going back to the original profile tailscaled started with.
Turns out that if we change the addrs on the interface we need to remove and readd
all the routes.
Updates #713
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Deleting may temporarily result in no addrs on the interface, which results in
all other rules (like routes) to get dropped by the OS.
I verified this fixes the problem.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Always set the MTU to the Tailscale default MTU. In practice we are
missing applying an MTU for IPv6 on Windows prior to this patch.
This is the simplest patch to fix the problem, the code in here needs
some more refactoring.
Fixes#5914
Signed-off-by: James Tucker <james@tailscale.com>
Context: https://github.com/tailscale/tailscale/pull/5588#issuecomment-1260655929
It seems that if the interface at index 1 is down, the rule is not installed. As such,
we increase the range we detect up to 2004 in the hope that at least one of the interfaces
1-4 will be up.
Signed-off-by: Tom DNetto <tom@tailscale.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This change masks the bitspace used when setting and querying the fwmark on packets. This allows
tailscaled to play nicer with other networking software on the host, assuming the other networking
software is also using fwmarks & a different mask.
IPTables / mark module has always supported masks, so this is safe on the netfilter front.
However, busybox only gained support for parsing + setting masks in 1.33.0, so we make sure we
arent such a version before we add the "/<mask>" syntax to an ip rule command.
Signed-off-by: Tom DNetto <tom@tailscale.com>
The iOS and macOS networking extension API only exposes a single setter
for the entire routing and DNS configuration, and does not appear to
do any kind of diffing or deltas when applying changes. This results
in spurious "network changed" errors in Chrome, even when the
`OneCGNATRoute` flag from df9ce972c7 is
used (because we're setting the same configuration repeatedly).
Since we already keep track of the current routing and DNS configuration
in CallbackRouter, use that to detect if they're actually changing, and
only invoke the platform setter if it's actually necessary.
Updates #3102
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Link-local addresses on the Tailscale interface are not routable.
Ideally they would be removed, however, a concern exists that the
operating system will attempt to re-add them which would lead to
thrashing.
Setting SkipAsSource attempts to avoid production of packets using the
address as a source in any default behaviors.
Before, in powershell: `ping (hostname)` would ping the link-local
address of the Tailscale interface, and fail.
After: `ping (hostname)` now pings the link-local address on the next
highest priority metric local interface.
Fixes#4647
Signed-off-by: James Tucker <james@tailscale.com>
Fixes#4647
It seems that Windows creates a link-local address for the TUN driver, seemingly
based on the (fixed) adapter GUID. This results in a fixed MAC address, which
for some reason doesn't handle loopback correctly. Given the derived link-local
address is preferred for lookups (thanks LLMNR), traffic which addresses the
current node by hostname uses this broken address and never works.
To address this, we remove the broken link-local address from the wintun adapter.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This reverts commit 8d6793fd70.
Reason: breaks Android build (cgo/pthreads addition)
We can try again next cycle.
Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Attempt to load the xt_mark kernel module when it is not present. If the
load fails, log error information.
It may be tempting to promote this failure to an error once it has been
in use for some time, so as to avoid reaching an error with the iptables
invocation, however, there are conditions under which the two stages may
disagree - this change adds more useful breadcrumbs.
Example new output from tailscaled running under my WSL2:
```
router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2
```
Background:
There are two places to lookup modules, one is `/proc/modules` "old",
the other is `/sys/module/` "new".
There was query_modules(2) in linux <2.6, alas, it is gone.
In a docker container in the default configuration, you would get
/proc/modules and /sys/module/ both populated. lsmod may work file,
modprobe will fail with EPERM at `finit_module()` for an unpriviliged
container.
In a priviliged container the load may *succeed*, if some conditions are
met. This condition should be avoided, but the code landing in this
change does not attempt to avoid this scenario as it is both difficult
to detect, and has a very uncertain impact.
In an nspawn container `/proc/modules` is populated, but `/sys/module`
does not exist. Modern `lsmod` versions will fail to gather most module
information, without sysfs being populated with module information.
In WSL2 modules are likely missing, as the in-use kernel typically is
not provided by the distribution filesystem, and WSL does not mount in a
module filesystem of its own. Notably the WSL2 kernel supports iptables
marks without listing the xt_mark module in /sys/module, and
/proc/modules is empty.
On a recent kernel, we can ask the capabilities system about SYS_MODULE,
that will help to disambiguate between the non-privileged container case
and just being root. On older kernels these calls may fail.
Update #4329
Signed-off-by: James Tucker <james@tailscale.com>
This was just cleanup for an ancient version of Tailscale. Any such machines
have upgraded since then.
Change-Id: Iadcde05b37c2b867f92e02ec5d2b18bf2b8f653a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
on error.
While debugging a customer issue where the firewallTweaker was failing
the only message we have is `router: firewall: error adding
Tailscale-Process rule: exit status 1` which is not really helpful.
This will help diagnose firewall tweaking failures.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Allow users of CallbackRouter to supply a GetBaseConfig
implementation. This is expected to be used on Android,
which currently lacks both a) platform support for
Split-DNS and b) a way to retrieve the current DNS
servers.
iOS/macOS also use the CallbackRouter but have platform
support for SplitDNS, so don't need getBaseConfig.
Updates https://github.com/tailscale/tailscale/issues/2116
Updates https://github.com/tailscale/tailscale/issues/988
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Tailscale 1.18 uses netlink instead of the "ip" command to program the
Linux kernel.
The old way was kept primarily for tests, but this also adds a
TS_DEBUG_USE_IP_COMMAND environment knob to force the old way
temporarily for debugging anybody who might have problems with the
new way in 1.18.
Updates #391
Change-Id: I0236fbfda6c9c05dcb3554fcc27ec0c86456efd9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Using temporary netlink fork in github.com/tailscale/netlink until we
get the necessary changes upstream in either vishvananda/netlink
or jsimonetti/rtnetlink.
Updates #391
Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Pull out the list of policy routing rules to a data structure
now shared between the add & delete paths, but to also be shared
by the netlink paths in a future change.
Updates #391
Change-Id: I119ab1c246f141d639006c808b61c585c3d67924
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Anybody using that one old, unreleased version of Tailscale from over
a year ago should've rebooted their machine by now to get various
non-Tailscale security updates. :)
Change-Id: If9e043cb008b20fcd6ddfd03756b3b23a9d7aeb5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
