The node and domain audit log IDs are provided in the map response,
but are ultimately going to be used in wgengine since
that's the layer that manages the tstun.Wrapper.
Do the plumbing work to get this field passed down the stack.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
On sufficiently large tailnets, even writing the peer header (~95 bytes)
can result in a large amount of data that needs to be serialized and
deserialized. Only write headers for peers that need to have their
configuration changed.
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
In rare circumstances (tailscale/corp#3016), the PublicKey
and Endpoints can diverge.
This by itself doesn't cause any harm, but our early exit
in response did, because it prevented us from recovering from it.
Remove the early exit.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming
at all call sites (one real plus several tests).
Fixestailscale/corp#3016.
Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
In DeviceConfig, we did not close r after calling FromUAPI.
If FromUAPI returned early due to an error, then it might
not have read all the data that IpcGetOperation wanted to write.
As a result, IpcGetOperation could hang, as in #3220.
We were also closing the wrong end of the pipe after IpcSetOperation
in ReconfigDevice.
To ensure that we get all available information to diagnose
such a situation, include all errors anytime something goes wrong.
This should fix the immediate crashing problem in #3220.
We'll then need to figure out why IpcGetOperation was failing.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The "go generate" command blindly looks for "//go:generate" anywhere
in the file regardless of whether it is truly a comment.
Prevent this false positive in cloner.go by mangling the string
to look less like "//go:generate".
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Spelling out the command to run for every type
means that changing the command makes for a large, repetitive diff.
Stop doing that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
It was useful early in development when disco clients were the
exception and tailscale logs were noisier than today, but now
non-disco is the exception.
Updates #2752
Signed-off-by: David Anderson <danderson@tailscale.com>
Instead of using the legacy codepath, teach discoEndpoint to handle
peers that have a home DERP, but no disco key. We can still communicate
with them, but only over DERP.
Signed-off-by: David Anderson <danderson@tailscale.com>
As Brad suggested, mem.RO allows for a lot of easy perf gains. There were also some smaller
changes outside of mem.RO, such as using hex.Decode instead of hex.DecodeString.
```
name old time/op new time/op delta
FromUAPI-8 14.7µs ± 3% 12.3µs ± 4% -16.58% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
FromUAPI-8 9.52kB ± 0% 7.04kB ± 0% -26.05% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
FromUAPI-8 77.0 ± 0% 29.0 ± 0% -62.34% (p=0.008 n=5+5)
```
Signed-off-by: julianknodt <julianknodt@gmail.com>
Adds a benchmark for FromUAPI in wgcfg.
It appears that it's not actually that slow, the main allocations are from the scanner and new
config.
Updates #1912.
Signed-off-by: julianknodt <julianknodt@gmail.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock.Conn.ParseEndpoint requires a peer's public key,
disco key, and legacy ip/ports in order to do its job.
We currently accomplish that by:
* adding the public key in our wireguard-go fork
* encoding the disco key as magic hostname
* using a bespoke comma-separated encoding
It's a bit messy.
Instead, switch to something simpler: use a json-encoded struct
containing exactly the information we need, in the form we use it.
Our wireguard-go fork still adds the public key to the
address when it passes it to ParseEndpoint, but now the code
compensating for that is just a couple of simple, well-commented lines.
Once this commit is in, we can remove that part of the fork
and remove the compensating code.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Upstream wireguard-go renamed the interface method
from CreateEndpoint to ParseEndpoint.
I missed some comments. Fix them.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
By using conn.NewDefaultBind, this test requires that our endpoints
be comprehensible to wireguard-go. Instead, use a no-op bind that
treats endpoints as opaque strings.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Prefer the error from the actual wireguard-go device method call,
not {To,From}UAPI, as those tend to be less interesting I/O errors.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
When wireguard-go's UAPI interface fails with an error, ReconfigDevice hangs.
Fix that by buffering the channel and closing the writer after the call.
The code now matches the corresponding code in DeviceConfig, where I got it right.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
For historical reasons, we ended up with two near-duplicate
copies of curve25519 key types, one in the wireguard-go module
(wgcfg) and one in the tailscale module (types/wgkey).
Then we moved wgcfg to the tailscale module.
We can now remove the wgcfg key type in favor of wgkey.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
These were getting rate-limited for nodes with many peers.
Consolate the output into single lines, which are nicer anyway.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
We don't use the port that wireguard-go passes to us (via magicsock.connBind.Open).
We ignore it entirely and use the port we selected.
When we tell wireguard-go that we're changing the listen_port,
it calls connBind.Close and then connBind.Open.
And in the meantime, it stops calling the receive functions,
which means that we stop receiving and processing UDP and DERP packets.
And that is Very Bad.
That was never a problem prior to b3ceca1dd7,
because we passed the SkipBindUpdate flag to our wireguard-go fork,
which told wireguard-go not to re-bind on listen_port changes.
That commit eliminated the SkipBindUpdate flag.
We could write a bunch of code to work around the gap.
We could add background readers that process UDP and DERP packets when wireguard-go isn't.
But it's simpler to never create the conditions in which wireguard-go rebinds.
The other scenario in which wireguard-go re-binds is device.Down.
Conveniently, we never call device.Down. We go from device.Up to device.Close,
and the latter only when we're shutting down a magicsock.Conn completely.
Rubber-ducked-by: Avery Pennarun <apenwarr@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Upstream wireguard-go has changed its receive model.
NewDevice now accepts a conn.Bind interface.
The conn.Bind is stateless; magicsock.Conns are stateful.
To work around this, we add a connBind type that supports
cheap teardown and bring-up, backed by a Conn.
The new conn.Bind allows us to specify a set of receive functions,
rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6.
This lets us plumbing DERP messages directly into wireguard-go,
instead of having to mux them via ReceiveIPv4.
One consequence of the new conn.Bind layer is that
closing the wireguard-go device is now indistinguishable
from the routine bring-up and tear-down normally experienced
by a conn.Bind. We thus have to explicitly close the magicsock.Conn
when the close the wireguard-go device.
One downside of this change is that we are reliant on wireguard-go
to call receiveDERP to process DERP messages. This is fine for now,
but is perhaps something we should fix in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The call to appendEndpoint updates cpeer.Endpoints.
Then it is overwritten in the next line.
The only errors from appendEndpoint occur when
the host/port pair is malformed, but that cannot happen.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
UIs need to see the full unedited netmap in order to know what exit nodes they
can offer to the user.
Signed-off-by: David Anderson <danderson@tailscale.com>
This is mostly code movement from the wireguard-go repo.
Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.
wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.
The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
