* don't try to re-Start (and thus create a new client) during Shutdown
* in tests, wait for controlclient to fully shut down when replacing it
* log a bit more
Updates tailscale/corp#14139
Updates tailscale/corp#13175 etc
Updates #9178 and its flakes.
Change-Id: I3ed2440644dc157aa6e616fe36fbd29a6056846c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have this in another repo and I wanted it here too.
Updates #cleanup
Change-Id: If93dc73f11eaaada5024acf2a885a153b88db5a0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
As a fallback to package managers, allow updating tailscale that was
self-installed in some way. There are some tricky bits around updating
the systemd unit (should we stick to local binary paths or to the ones
in tailscaled.service?), so leaving that out for now.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Don't depend on the server to do it.
Updates #cleanup
Change-Id: I8ff40b02aa877155a71fd4db58cbecb872241ac8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of trying to use the user config dir, and then fail back to the
OS temp dir, just always use the temp dir. Also use a filename that is
less likely to cause collisions.
This addresses an issue on a test synology instance that was
mysteriously failing because there was a file at /tmp/tailscale. We
could still technically run into this issue if a
/tmp/tailscale-web-csrf.key file exists, but that seems far less likely.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of confusing users, emit an event that explicitly tells the
user that HTTPS is disabled on the tailnet and that ingress may not
work until they enable it.
Updates #9141
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Port 8080 is routinely used for HTTP services, make it easier to
use --forwards=tcp/8080/... by moving the metrics port out of the
way.
Updates #1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
I'm trying to remove some stuff from the netmap update path.
Updates #1909
Change-Id: Iad2c728dda160cd52f33ef9cf0b75b4940e0ce64
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Ensures that Statefulset reconciler config has only one of Cluster target IP or tailnet target IP.
Adds a test case for containerboot egress proxy mode.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
First part of work for the functionality that allows users to create an egress
proxy to access Tailnet services from within Kubernetes cluster workloads.
This PR allows creating an egress proxy that can access Tailscale services over HTTP only.
Updates tailscale/tailscale#8184
Signed-off-by: irbekrm <irbekrm@gmail.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
While investigating the fix in 7538f38671,
I was curious why the testwrapper didn't fail. Turns out if the test
times out and there was no explicit failure, the only message we get
is that the overall pkg failed and no failure information about the
individual test. This resulted in a 0 exit code.
This fixes that by failing the explicit case of the pkg failing when
there is nothing to retry for that pkg.
Updates #8493
Signed-off-by: Maisem Ali <maisem@tailscale.com>
On linux users can install Tailscale via package managers or direct
tarball downloads. Detect when Tailscale is not installed via a package
manager so we can pick the correct update mechanism. Leave the tarball
update function unimplemented for now (coming in next PR!).
Updates #6995
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This makes wsconn.Conns somewhat present reasonably when they are
the client of an http.Request, rather than just put a placeholder
in that field.
Updates tailscale/corp#13777
Signed-off-by: David Anderson <danderson@tailscale.com>
Ensures that we're sending back the csrf token for all requests
made back to unraid clients.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds proxy to the localapi from /api/local/ web client endpoint.
The localapi proxy is restricted to an allowlist of those actually
used by the web client frontend.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes a lot of API from net/interfaces (including all the
filter types, EqualFiltered, active Tailscale interface func, etc) and
moves the "major" change detection to net/netmon which knows more
about the world and the previous/new states.
Updates #9040
Change-Id: I7fe66a23039c6347ae5458745b709e7ebdcce245
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
De-pointer a *time.Time type, move it after the mutex which guard is,
rename two test-only methods with our conventional "ForTest" suffix.
Updates #cleanup
Change-Id: I4f4d1acd9c2de33d9c3cb6465d7349ed051aa9f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Named result meant error paths assigned that variable to nil.
But a goroutine was concurrently using that variable.
Don't use a named result for that first parameter. Then then return
paths don't overwrite it.
Fixes#9129
Change-Id: Ie57f99d40ca8110085097780686d9bd620aaf160
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now the method has only one interface (the same as the func it's
replacing) but it will grow, eventually with the goal to remove the
controlclient.Status type for most purposes.
Updates #1909
Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't see the race builder fail on CI earlier in 590c693b9.
This fixes the test.
Updates #greenci
Change-Id: I9f271bfadfc29b010226b55bf6647f35f03730b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So even if the server doesn't support sending patches (neither the
Tailscale control server nor Headscale yet do), this makes the client
convert a changed node to its diff so the diffs can be processed
individually in a follow-up change.
This lets us make progress on #1909 without adding a dependency on
finishing the server-side part, and also means other control servers
will get the same upcoming optimizations.
And add some clientmetrics while here.
Updates #1909
Change-Id: I9533bcb8bba5227e17389f0b10dff71f33ee54ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Top-level Version in pkgs response is not always in sync with SPK
versions, especially on unstable track. It's very confusing when the
confirmation prompt asks you "update to 1.49.x?" and you end up updating
to 1.49.y.
Instead, grab the SPK-specific version field.
Updates #cleanup.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Reimplement `downloadURLToFile` using `distsign.Download` and move all
of the progress reporting logic over there.
Updates #6995
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This was added in 3451b89e5f, but
resulted in the v6 Tailscale address being added to status when
when the forwarding only happened on the v4 address.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The new ingress reconcile raises events on failure, but I forgot to
add the updated permission.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes it more maintainable for other code to statically depend
on the exact value of this string. It also makes it easier to
identify what code might depend on this string by looking up
references to this constant.
Updates tailscale/corp#13777
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This uses the new react-based web client for all builds, not just with
the --dev flag.
If the web client assets have not been built, the client will serve a
message that Tailscale was built without the web client, and link to
build instructions. Because we will include the web client in all of our
builds, this should only be seen by developers or users building from
source. (And eventually this will be replaced by attempting to download
needed assets as runtime.)
We do now checkin the build/index.html file, which serves the error
message when assets are unavailable. This will also eventually be used
to trigger in CI when new assets should be built and uploaded to a
well-known location.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Helper command to verify package signatures, mainly for debugging.
Also fix a copy-paste mistake in error message in distsign.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
