And don't make guests under vnet/natlab upload to logcatcher,
as there won't be a valid cert anyway.
Updates #13038
Change-Id: Ie1ce0139788036b8ecc1804549a9b5d326c5fef5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Re-instates the functionality that generates CRD API docs, but using
a different library as the one we were using earlier seemed to have
some issues with its Git history.
Also regenerates the docs (make kube-generate-all).
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a variant for Connect that takes in a context.Context
which allows passing through cancellation etc by the caller.
Updates tailscale/corp#18266
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Not buying wifi on a short flight is a good way to find tests
that require network. Whoops.
Updates #cleanup
Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were storing server-side lots of:
"Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""},
That was about 7% of our total storage of pending RegisterRequest
bodies.
Updates tailscale/corp#19327
Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Most of the magicsock tests fake the network, simulating packets going
out and coming in. There's no reason to actually hit your router to do
UPnP/NAT-PMP/PCP during in tests. But while debugging thousands of
iterations of tests to deflake some things, I saw it slamming my
router. This stops that.
Updates #11762
Change-Id: I59b9f48f8f5aff1fa16b4935753d786342e87744
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have tstest/integration nowadays.
And this test was one of the lone holdouts using the to-be-nuked
SetControlClientGetterForTesting.
Updates #11649
Change-Id: Icf8a6a2e9b8ae1ac534754afa898c00dc0b7623b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Add logic to autogenerate CRD docs.
.github/workflows/kubemanifests.yaml CI workflow will fail if the doc is out of date with regard to the current CRDs.
Docs can be refreshed by running make kube-generate-all.
Updates tailscale/tailscale#11023
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This type seems to be a migration shim for TCP tailscaled sockets
(instead of unix/windows pipes). The `port` field was never set, so it
was effectively used as a string (`path` field).
Remove the whole type and simplify call sites to pass the socket path
directly to `safesocket.Connect`.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* Implement missing tests for sniproxy
* Wire sniproxy to new appc package
* Add support to tsnet for routing subnet router traffic into netstack, so it can be handled
Updates: https://github.com/tailscale/corp/issues/15038
Signed-off-by: Tom DNetto <tom@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Terminating traffic to IPs which are not the native IPs of the node requires
the netstack subsystem to intercept trafic to an IP it does not consider local.
This PR switches on such interception. In addition to supporting such termination,
this change will also enable exit nodes and subnet routers when running in
userspace mode.
DO NOT MERGE until 1.52 is cut.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates: https://github.com/tailscale/corp/issues/15038
Misc cleanups and things noticed while working on #7894 and pulled out
of a separate change. Submitting them on their own to not distract
from later changes.
Updates #7894
Change-Id: Ie9abc8b88f121c559aeeb7e74db2aa532eb84d3d
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new integration test with two nodes where the first gets a
incremental MapResponse (with only PeersRemoved set) saying that the
second node disappeared.
This extends the testcontrol package to support sending raw
MapResponses to nodes.
Updates #1909
Change-Id: Iea0c25c19cf0d72b52dba5a46d01b5cc87b9b39d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was only waiting for 0.5s (5ms * 100), but our CI
is too slow so make it wait up to 3s (10ms * 300).
Updates tailscale/corp#14515
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We use it a number of places in different repos. Might as well make
one. Another use is coming.
Updates #cleanup
Change-Id: Ib7ce38de0db35af998171edee81ca875102349a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed that failed tests were leaving aroudn stray tailscaled processes
on macOS at least.
To repro, add this to tstest/integration:
func TestFailInFewSeconds(t *testing.T) {
t.Parallel()
time.Sleep(3 * time.Second)
os.Exit(1)
t.Fatal("boom")
}
Those three seconds let the other parallel tests (with all their
tailscaled child processes) start up and start running their tests,
but then we violently os.Exit(1) the test driver and all the children
were kept alive (and were spinning away, using all available CPU in
gvisor scheduler code, which is a separate scary issue)
Updates #cleanup
Change-Id: I9c891ed1a1ec639fb2afec2808c04dbb8a460e0e
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR removes calls to ioutil library and replaces them
with their new locations in the io and os packages.
Fixes#9034
Updates #5210
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* We update wingoes to pick up new version information functionality
(See pe/version.go in the https://github.com/dblohm7/wingoes repo);
* We move the existing LogSupportInfo code (including necessary syscall
stubs) out of util/winutil into a new package, util/osdiag, and implement
the public LogSupportInfo function may be implemented for other platforms
as needed;
* We add a new reason argument to LogSupportInfo and wire that into
localapi's bugreport implementation;
* We add module information to the Windows implementation of LogSupportInfo
when reason indicates a bugreport. We enumerate all loaded modules in our
process, and for each one we gather debug, authenticode signature, and
version information.
Fixes#7802
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change introduces tstime.Clock which is the start of a mockable
interface for use with testing other upcoming code changes.
Fixes#8463
Change-Id: I59eabc797828809194575736615535d918242ec4
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This change introduces tstime.NewClock and tstime.ClockOpts as a new way
to construct tstime.Clock. This is a subset of #8464 as a stepping stone
so that we can update our internal code to use the new API before making
the second round of changes.
Updates #8463
Change-Id: Ib26edb60e5355802aeca83ed60e4fdf806c90e27
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
The panicLogWriter is too strict, and any panics that occur
get wrapped up in quotes. This makes it so that it will allow
panics to continue writing to Stderr without going through
logger.Logf.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Without this, the peer fails to do anything over the PeerAPI if it
has a masquerade address.
```
Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses
```
Updates #8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
So we're staying within the netip.Addr/AddrPort consistently and
avoiding allocs/conversions to the legacy net addr types.
Updates #5162
Change-Id: I59feba60d3de39f773e68292d759766bac98c917
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes `omitempty` actually work, and saves bytes in each map response.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This splits Prometheus metric handlers exposed by tsweb into two
modules:
- `varz.Handler` exposes Prometheus metrics generated by our expvar
converter;
- `promvarz.Handler` combines our expvar-converted metrics and native
Prometheus metrics.
By default, tsweb will use the promvarz handler, however users can keep
using only the expvar converter. Specifically, `tailscaled` now uses
`varz.Handler` explicitly, which avoids a dependency on the
(heavyweight) Prometheus client.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
We have many function pointers that we replace for the duration of test and
restore it on test completion, add method to do that.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Updates #7123
Updates #6257 (more to do in other repos)
Change-Id: I073e2a6d81a5d7fbecc29caddb7e057ff65239d0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Go now includes the GOROOT bin directory in $PATH while running tests
and generate, so it is no longer necessary to construct a path using
runtime.GOROOT().
Fixes#6689
Signed-off-by: James Tucker <james@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
