We were missing `snat-subnet-routes`, `stateful-filtering`
and `netfilter-mode`. Add those to set too.
Fixes#12061
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We are now publishing nameserver images to tailscale/k8s-nameserver,
so we can start defaulting the images if users haven't set
them explicitly, same as we already do with proxy images.
The nameserver images are currently only published for unstable
track, so we have to use the static 'unstable' tag.
Once we start publishing to stable, we can make the operator
default to its own tag (because then we'll know that for each
operator tag X there is also a nameserver tag X as we always
cut all images for a given tag.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Previously, a node that was advertising a 4via6 route wouldn't be able
to make use of that same route; the packet would be delivered to
Tailscale, but since we weren't accepting it in handleLocalPackets, the
packet wouldn't be delivered to netstack and would never hit the 4via6
logic. Let's add that support so that usage of 4via6 is consistent
regardless of where the connection is initiated from.
Updates #11304
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a small window in ipnserver after we assigned a LocalBackend
to the ipnserver's atomic but before we Start'ed it where our
initalization Start could conflict with API calls from the LocalAPI.
Simplify that a bit and lay out the rules in the docs.
Updates #12028
Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to Lock, Unlock, Lock, Unlock quite a few
times in Start resulting in all sorts of weird race
conditions. Simplify it all and only Lock/Unlock once.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes one of the Lock,Unlock,Lock,Unlock at least in
the Start function. Still has 3 more of these.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was documented as such but seems to have been dropped in a
refactor, restore the behavior. This brings down the time it
takes to run a single integration test by 2s which adds up
quite a bit.
Updates tailscale/corp#19786
Signed-off-by: Maisem Ali <maisem@tailscale.com>
I found this too hard to read before.
This is pulled out of #12033 as it's unrelated cleanup in retrospect.
Updates #12028
Change-Id: I727c47e573217e3d1973c5b66a76748139cf79ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This way the default gets populated on first start, when no existing
state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty
fields, rather than layering `NewPrefs` values on top.
Updates https://github.com/tailscale/corp/issues/19623
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This plumbs a packet filter for jailed nodes through to the
tstun.Wrapper; the filter for a jailed node is equivalent to a "shields
up" filter. Currently a no-op as there is no way for control to
tell the client whether a peer is jailed.
Updates tailscale/corp#19623
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad
Now that tsdial.Dialer.UserDial has been updated to honor the configured routes
and dial external network addresses without going through Tailscale, while also being
able to dial a node/subnet router on the tailnet, we can start using UserDial to forward
DNS requests. This is primarily needed for DNS over TCP when forwarding requests
to internal DNS servers, but we also update getKnownDoHClientForProvider to use it.
Updates tailscale/corp#18725
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This refactors the peerConfig struct to allow storing more
details about a peer and not just the masq addresses. To be
used in a follow up change.
As a side effect, this also makes the DNAT logic on the inbound
packet stricter. Previously it would only match against the packets
dst IP, not it also takes the src IP into consideration. The beahvior
is at parity with the SNAT case.
Updates tailscale/corp#19623
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5f40802bebbf0f055436eb8824e4511d0052772d
The CLI "up" command is a historical mess, both on the CLI side and
the LocalBackend side. We're getting closer to cleaning it up, but in
the meantime it was again implicated in flaky tests.
In this case, the background goroutine running WatchIPNBus was very
occasionally running enough to get to its StartLoginInteractive call
before the original goroutine did its Start call. That meant
integration tests were very rarely but sometimes logging in with the
default control plane URL out on the internet
(controlplane.tailscale.com) instead of the localhost control server
for tests.
This also might've affected new Headscale etc users on initial "up".
Fixes#11960Fixes#11962
Change-Id: I36f8817b69267a99271b5ee78cb7dbf0fcc0bd34
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed this while working on the following fix to #11962.
Updates #11962
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I4c5894d8899d1ae8c42f54ecfd4d05a4a7ac598c
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
set.Of(1, 2, 3) is prettier than set.SetOf([]int{1, 2, 3}).
I was going to change the signature of SetOf but then I noticed its
name has stutter anyway, so I kept it for compatibility. People can
prefer to use set.Of for new code or slowly migrate.
Also add a lazy Make method, which I often find myself wanting,
without having to resort to uglier mak.Set(&set, k, struct{}{}).
Updates #cleanup
Change-Id: Ic6f3870115334efcbd65e79c437de2ad3edb7625
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The inflight request tracker only starts recording a new bucket after
the first non-error request. Unfortunately, it's written in such a way
that ONLY successful requests are ever marked as being finished. Once a
bucket has had at least one successful request and begun to be tracked,
all subsequent error cases are never marked finished and always appear
as in-flight.
This change ensures that if a request is recorded has having been
started, we also mark it as finished at the end.
Updates tailscale/corp#19767
Signed-off-by: Will Norris <will@tailscale.com>
Setting the field after-the-fact wasn't working because we could migrate
prefs on creation, which would set health status for auto updates.
Updates #11986
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I41d79ebd61d64829a3a9e70586ce56f62d24ccfd
While debugging a failing test in airplane mode on macOS, I noticed
netcheck logspam about ICMP socket creation permission denied errors.
Apparently macOS just can't do those, or at least not in airplane
mode. Not worth spamming about.
Updates #cleanup
Change-Id: I302620cfd3c8eabb25202d7eef040c01bd8a843c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The netcheck client, when no UDP is available, probes distance using
HTTPS.
Several problems:
* It probes using /derp/latency-check.
* But cmd/derper serves the handler at /derp/probe
* Despite the difference, it work by accident until c8f4dfc8c0
which made netcheck's probe require a 2xx status code.
* in tests, we only use derphttp.Handler, so the cmd/derper-installed
mux routes aren't preesnt, so there's no probe. That breaks
tests in airplane mode. netcheck.Client then reports "unexpected
HTTP status 426" (Upgrade Required)
This makes derp handle both /derp/probe and /derp/latency-check
equivalently, and in both cmd/derper and derphttp.Handler standalone
modes.
I notice this when wgengine/magicsock TestActiveDiscovery was failing
in airplane mode (no wifi). It still doesn't pass, but it gets
further.
Fixes#11989
Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f
Not buying wifi on a short flight is a good way to find tests
that require network. Whoops.
Updates #cleanup
Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for it being required in more places.
Updates #11874
Change-Id: Ib743205fc2a6c6ff3d2c4ed3a2b28cac79156539
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
