Effectively reverts #249, since the server side was fixed (with #251?)
to send a 200 OK/content-length 0 response.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We can use the TCP_CONNECTION_INFO getsockopt() on Darwin to get
OS-collected tx/rx bytes for TCP sockets. Since this API is not available
for UDP sockets (or on Linux/Android), we can't rely on it for actual
stats gathering.
However, we can use it to validate the stats that we collect ourselves
using read/write hooks, so that we can be more confident in them. We
do need additional hooks from the Go standard library (added in
tailscale/go#59) to be able to collect them.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Prior to this change, if we were in the middle of a lite map update we'd
tear down the entire map session and restart it. With this change, we'll
cancel an in-flight lite map request up to 10 times and restart before
we tear down the streaming map request. We tear down everything after 10
retries to ensure that a steady stream of calls to sendNewMapRequest
doesn't fail to make progress by repeatedly canceling and restarting.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I9392bf8cf674e7a58ccd1e476039300a359ef3b1
Previously, it would accept all TCP connections and then close the ones
it did not care about. Make it only ever accept the connections that it
cares about.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The main motivation for this change is to stop using the deprecated
set-output function which triggers deprecation warnings in the action.
Change-Id: I80496c44ea1166b9c40d5cd9e450129778ad4aaf
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This package handles cases where we need to truncate human-readable text to fit
a length constraint without leaving "ragged" multi-byte rune fragments at the
end of the truncated value.
Change-Id: Id972135d1880485f41b1fedfb65c2b8cc012d416
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This change adds a ringbuffer to each magicsock endpoint that keeps a
fixed set of "changes"–debug information about what updates have been
made to that endpoint.
Additionally, this adds a LocalAPI endpoint and associated
"debug peer-status" CLI subcommand to fetch the set of changes for a given
IP or hostname.
Updates tailscale/corp#9364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a
I explained this tails/scales list to my 5yo and he looked at me like
it was the most obvious idea ever. Of course we'd make such lists at
work! What else do grown-ups do all day? And then he wouldn't stop
talking about coelacanths and I had no clue what he was saying or how
to spell it until I asked my phone and the phone apparently understood
me and I realized it was a fish and he was helping me? I think?
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a DNS server which always responds as its own IP addresses.
Additionally add a tsnet TailscaleIPs() function to return the
IP addresses, both IPv4 and IPv6.
Updates https://github.com/tailscale/tailscale/issues/1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The time.Parse function has been optimized to the point
where it is faster than our custom implementation.
See upstream changes in:
* https://go.dev/cl/429862
* https://go.dev/cl/425197
* https://go.dev/cl/425116
Performance:
BenchmarkGoParse3339/Z 38.75 ns/op 0 B/op 0 allocs/op
BenchmarkGoParse3339/TZ 54.02 ns/op 0 B/op 0 allocs/op
BenchmarkParse3339/Z 40.17 ns/op 0 B/op 0 allocs/op
BenchmarkParse3339/TZ 87.06 ns/op 0 B/op 0 allocs/op
We can see that the stdlib implementation is now faster.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Despite the fact that WSL configuration is still disabled by default, we
continue to log the machine's list of WSL distros as a diagnostic measure.
Unfortunately I have seen the "wsl.exe -l" command hang indefinitely. This patch
adds a (more than reasonable) 10s timeout to ensure that tailscaled does not get
stuck while executing this operation.
I also modified the Windows implementation of NewOSConfigurator to do the
logging asynchronously, since that information is not required in order to
continue starting up.
Fixes#7476
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Some languages do not give you any useful access to the sockets
underlying their networking packages. E.g. java.net.http.HttpClient
provides no official access to its dialing logic.
...but everyone supports proxies. So add a SOCKS5 proxy on the listener
we are already running.
(The function being revamped is very new,
I only added it in the last week and it wasn't part of any release,
so I believe it is fine to redo its function signature.)
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
This prevents a panic where we synthesize a new netmap in
setClientStatus after we've shut down and nil'd out the controlclient,
since that function expects to be called while connected to control.
Fixes#7392
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib631eb90f34f6afa008d69bbb386f70da145e102
Conforms to RFC 1929.
To support Java HTTP clients via libtailscale, who offer no other
reliable hooks into their sockets.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
No ListenPacket support yet, but Listen with a udp network type fit
easier into netstack's model to start.
Then added an example of using it to cmd/sniproxy with a little udp
:53 handler.
No tests in tsnet yet because we don't have support for dialing over
UDP in tsnet yet. When that's done, a new test can test both sides.
Updates #5871
Updates #1748
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This ensures that any mappings that are created are correctly cleaned
up, instead of waiting for them to expire in the router.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I436248ee7740eded6d8adae5df525e785a8f7ccb
Per a packet capture provided, some gateways will reply to a UPnP
discovery packet with a UDP packet with a source port that does not come
from the UPnP port. Accept these packets with a log message.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5d4d5b2a0275009ed60f15c20b484fe2025d094b
We were previously sending a lower-case "udp" protocol, whereas other
implementations like miniupnp send an upper-case "UDP" protocol. For
compatibility, use an upper-case protocol instead.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4aed204f94e4d51b7a256d29917af1536cb1b70f
Some devices don't let you UPnP portmap a port below 1024, so let's just
avoid that range of ports entirely.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib7603b1c9a019162cdc4fa21744a2cae48bb1d86
Return a mock set of interfaces and a mock gateway during this test and
verify that LikelyHomeRouterIP returns the outcome we expect. Also
verify that we return an error if there are no IPv4 addresses available.
Follow-up to #7447
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f06989e7f1f0bebd108861cbff17b820ed2e6e4
We have many function pointers that we replace for the duration of test and
restore it on test completion, add method to do that.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We weren't filtering out IPv6 addresses from this function, so we could
be returning an IPv4 gateway IP and an IPv6 self IP. Per the function
comments, only return IPv4 addresses for the self IP.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If19a4aadc343fbd4383fc5290befa0eff006799e
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
WSL has started to set the eth0 default route interface default to 1280
MTU, which is too low to carry 1280 byte packets from tailscale0 once
wrapped in WireGuard. The change down to 1280 is very likely smaller
than necessary for almost all users. We can not easily determine the
ideal MTU, but if all the preconditions match, we raise the MTU to 1360,
which is just enough for Tailscale traffic to work.
Updates #4833
Updates #7346
Signed-off-by: James Tucker <james@tailscale.com>
This is to address a possible DNS failure on startup. Before this
change IPv6 addresses would be listed first, and the client dialer would
fail for hosts without IPv6 connectivity.
This ensures that we're trying multiple returned IPs, since the DERP
servers return the same response to all queries. This should increase
the chances that we eventually reach a working IP.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie8d4fb93df96da910fae49ae71bf3e402b9fdecc
Update API documentation to include explanation of resources, a cleaner and more consistent structure, updated terminology, and fixes to a few errors and omissions.
Signed-off-by: Julia Stein <julia@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Will Norris <will@tailscale.com>
Share the same underlying implementation for both PrivateID and PublicID.
For the shared methods, declare them in the same order.
Only keep documentation on methods without obvious meaning.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We had two implemenetations of the kube client, merge them.
containerboot was also using a raw http.Transport, this also has
the side effect of making it use a http.Client
Signed-off-by: Maisem Ali <maisem@tailscale.com>
