example was missing the "-auth" type in the key prefix, which all new
keys now contain. Also update key ID to match the full key, and fix
indenting of closing braces.
Signed-off-by: Will Norris <will@tailscale.com>
To get the tree green again for other people.
Updates #7866
Change-Id: Ibdad2e1408e5f0c97e49a148bfd77aad17c2c5e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This also adds a bunch of tests for this function to ensure that we're
returning the proper IP(s) in all cases.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399
This makes `omitempty` actually work, and saves bytes in each map response.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
At the current unoptimized memory utilization of the various data structures,
100k IPv6 routes consumes in the ballpark of 3-4GiB, which risks OOMing our
386 test machine.
Until we have the optimizations to (drastically) reduce that consumption,
skip the test that bloats too much for 32-bit machines.
Signed-off-by: David Anderson <danderson@tailscale.com>
Using log.Printf may end up being printed out to the console, which
is not desirable. I noticed this when I was investigating some client
logs with `sockstats: trace "NetcheckClient" was overwritten by another`.
That turns to be harmless/expected (the netcheck client will fall back
to the DERP client in some cases, which does its own sockstats trace).
However, the log output could be visible to users if running the
`tailscale netcheck` CLI command, which would be needlessly confusing.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We use it to gate code that depends on custom Go toolchain, but it's
currently only passed in the corp runners. Add a set on OSS so that we
can catch regressions earlier.
To specifically test sockstats this required adding a build tag to
explicitly enable them -- they're normally on for iOS, macOS and Android
only, and we don't run tests on those platforms normally.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
It's used to control various opt-in functionality for the macOS and iOS
apps, and was lost in the migration to gocross.
Updates tailscale/tailscale#7769
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This splits Prometheus metric handlers exposed by tsweb into two
modules:
- `varz.Handler` exposes Prometheus metrics generated by our expvar
converter;
- `promvarz.Handler` combines our expvar-converted metrics and native
Prometheus metrics.
By default, tsweb will use the promvarz handler, however users can keep
using only the expvar converter. Specifically, `tailscaled` now uses
`varz.Handler` explicitly, which avoids a dependency on the
(heavyweight) Prometheus client.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This provides an example of using native Prometheus metrics with tsweb.
Prober library seems to be the only user of PrometheusVar, so I am
removing support for it in tsweb.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The handler will expose built-in process and Go metrics by default,
which currently duplicate some of the expvar-proxied metrics
(`goroutines` vs `go_goroutines`, `memstats` vs `go_memstats`), but as
long as their names are different, Prometheus server will just scrape
both.
This will change /debug/varz behaviour for most tsweb binaries, but
notably not for control, which configures a `tsweb.VarzHandler`
[explicitly](a5b5d5167f/cmd/tailcontrol/tailcontrol.go (L779))
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Otherwise there may be a panic if it's nil (and the control side of
the c2n call will just time out).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it more apparent in the PeerAPI endpoint that the client was
not built with the appropriate toolchain or build tags.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The lazy initialization of the disco key is not necessary, and
contributes to unnecessary locking and state checking.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
Running tailscaled with the race detector enabled immediately fires on
this field, as it is updated after first read.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
A peer can have IsWireGuardOnly, which means it will not support DERP or
Disco, and it must have Endpoints filled in order to be usable.
In the present implementation only the first Endpoint will be used as
the bestAddr.
Updates tailscale/corp#10351
Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Identified in review in #7821 endpoint.discoKey and endpoint.discoShort
are often accessed without first taking endpoint.mu. The arrangement
with endpoint.mu is inconvenient for a good number of those call-sites,
so it is instead replaced with an atomic pointer to carry both pieces of
disco info. This will also help with #7821 that wants to add explicit
checks/guards to disable disco behaviors when disco keys are missing
which is necessarily implicitly mostly covered by this change.
Updates #7821
Signed-off-by: James Tucker <james@tailscale.com>
power state is very roughly approximated based on observed network
activity and AT&T's state transition timings for a typical 3G radio.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Will Norris <will@tailscale.com>
Adds NewGaugeFunc and NewCounterFunc (inspired by expvar.Func) which
change the current value to be reported by a function. This allows
some client metric values to be computed on-demand during uploading (at
most every 15 seconds), instead of being continuously updated.
clientmetric uploading had a bunch of micro-optimizations for memory
access (#3331) which are not possible with this approach. However, any
performance hit from function-based metrics is contained to those metrics
only, and we expect to have very few.
Also adds a DisableDeltas() option for client metrics, so that absolute
values are always reported. This makes server-side processing of some
metrics easier to reason about.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Make developing derp easier by:
1. Creating an envknob telling clients to use HTTP to connect to derp
servers, so devs don't have to acquire a valid TLS cert.
2. Creating an envknob telling clients which derp server to connect
to, so devs don't have to edit the ACLs in the admin console to add a
custom DERP map.
3. Explaining how the -dev and -a command lines args to derper
interact.
To use this:
1. Run derper with -dev.
2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and
TS_DEBUG_USE_DERP_ADDR=localhost
This will result in the client connecting to derp via HTTP on port
3340.
Fixes#7700
Signed-off-by: Val <valerie@tailscale.com>
This commit implements UDP offloading for Linux. GSO size is passed to
and from the kernel via socket control messages. Support is probed at
runtime.
UDP GSO is dependent on checksum offload support on the egress netdev.
UDP GSO will be disabled in the event sendmmsg() returns EIO, which is
a strong signal that the egress netdev does not support checksum
offload.
Updates tailscale/corp#8734
Signed-off-by: Jordan Whited <jordan@tailscale.com>
macOS does not allow unix socket creation in private temp directories,
but global /tmp is ok, so swap out for global temp for now.
Updates #7658
Updates #7785
Signed-off-by: James Tucker <jftucker@gmail.com>
