When the /api/auth response indicates that synology auth is needed,
fetch the SynoToken and store it for future API calls. This doesn't yet
update the server-side code to set the new SynoAuth field.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
For now this is effectively a noop, since only the ManagementClientView
uses the auth data. That will change soon.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This commit makes the following structural changes to the web
client interface. No user-visible changes.
1. Splits login, legacy, readonly, and full management clients into
their own components, and pulls them out into their own view files.
2. Renders the same Login component for all scenarios when the client
is not logged in, regardless of legacy or debug mode. Styling comes
from the existing legacy login, which is removed from legacy.tsx
now that it is shared.
3. Adds a ui folder to hold non-Tailscale-specific components,
starting with ProfilePic, previously housed in app.tsx.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously returned errTaggedSource in the case that of any tagged
source. Now distinguishing whether the source was local or remote.
We'll be presenting the two cases with varying copy on the frontend.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This commit makes two changes to the web client auth flow error
handling:
1. Properly passes back the error code from the noise request from
the localapi. Previously we were using io.Copy, which was always
setting a 200 response status code.
2. Clean up web client browser sessions on any /wait endpoint error.
This avoids the user getting in a stuck state if something goes
wrong with their auth path.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Stores ID from tailcfg.WebClientAuthResponse in browser session
data, and uses ID to hit control server /wait endpoint.
No longer need the control url cached, so removed that from Server.
Also added optional timeNow field, initially to manage time from
tests.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Connects serveTailscaleAuth to the localapi webclient endpoint
and pipes auth URLs and session cookies back to the browser to
redirect users from the frontend.
All behind debug flags for now.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Moves request authorization back into Server.serve to be run at
the start of any request. Fixes Synology unstable track bug where
client would get stuck unable to auth due to not rendering the
Synology redirect auth html on index.html load.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds `getTailscaleBrowserSession` to pull the user's session out of
api requests, and `serveTailscaleAuth` to provide the "/api/auth"
endpoint for browser to request auth status and new sessions.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds browser session cache, to be used to store sessions for the
full management web client.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
UI updates staged behind debug mode flags. Initial new views added
in app.tsx, rendered based on the current debug setting.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds new LoginOnly server option and swaps out API handler depending
on whether running in login mode or full web client mode.
Also includes some minor refactoring to the synology/qnap authorization
logic to allow for easier sharing between serveLoginAPI and serveAPI.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Remove the "JSON" ending, we no longer have a non-JSON version,
it was removed in d74c771 when we switched from the legacy web
client to React.
Also combine getNodeData into serveGetNodeData now that serveGetNodeData
is the single caller of getNodeData.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This PR uses the etag/if-match pattern to ensure multiple calls
to SetServeConfig are synchronized. It currently errors out and
asks the user to retry but we can add occ retries as a follow up.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A #cleanup that moves all frontend asset handling into assets.go
(formerly dev.go), and stores a single assetsHandler field back
to web.Server that manages when to serve the dev vite proxy versus
static files itself.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Replace %w verb with %v verb when logging errors.
Use %w only for wrapping errors with fmt.Errorf()
Fixes: #9213
Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>
We already had a path on the web client server struct, but hadn't
plumbed it through to the CLI. Add that now and use it for Synology and
QNAP instead of hard-coding the path. (Adding flag for QNAP is
tailscale/tailscale-qpkg#112) This will allow supporting other
environments (like unraid) without additional changes to the client/web
package.
Also fix a small bug in unraid handling to only include the csrf token
on POST requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Instead of trying to use the user config dir, and then fail back to the
OS temp dir, just always use the temp dir. Also use a filename that is
less likely to cause collisions.
This addresses an issue on a test synology instance that was
mysteriously failing because there was a file at /tmp/tailscale. We
could still technically run into this issue if a
/tmp/tailscale-web-csrf.key file exists, but that seems far less likely.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Ensures that we're sending back the csrf token for all requests
made back to unraid clients.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds proxy to the localapi from /api/local/ web client endpoint.
The localapi proxy is restricted to an allowlist of those actually
used by the web client frontend.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This uses the new react-based web client for all builds, not just with
the --dev flag.
If the web client assets have not been built, the client will serve a
message that Tailscale was built without the web client, and link to
build instructions. Because we will include the web client in all of our
builds, this should only be seen by developers or users building from
source. (And eventually this will be replaced by attempting to download
needed assets as runtime.)
We do now checkin the build/index.html file, which serves the error
message when assets are unavailable. This will also eventually be used
to trigger in CI when new assets should be built and uploaded to a
well-known location.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This option allows logging the raw HTTP requests and responses that the
portmapper Client makes when using UPnP. This can be extremely helpful
when debugging strange UPnP issues with users' devices, and might allow
us to avoid having to instruct users to perform a packet capture.
Updates #8992
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4
Also uses `http.HandlerFunc` to pass the handler into `csrfProtect`
so we can get rid of the extraneous `api` struct.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a cached self node to the web client Server struct, which will
be used from the web client api to verify that request came from the
node's own machine (i.e. came from the web client frontend). We'll
be using when we switch the web client api over to acting as a proxy
to the localapi, to protect against DNS rebinding attacks.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Synology and QNAP both run the web client as a CGI script. The old web
client didn't care too much about requests paths, since there was only a
single GET and POST handler. The new client serves assets on different
paths, so now we need to care.
First, enforce that the CGI script is always accessed from its full
path, including a trailing slash (e.g. /cgi-bin/tailscale/index.cgi/).
Then, strip that prefix off before passing the request along to the main
serve handler. This allows for properly serving both static files and
the API handler in a CGI environment. Also add a CGIPath option to allow
other CGI environments to specify a custom path.
Finally, update vite and one "api/data" call to no longer assume that we
are always serving at the root path of "/".
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Add separate server methods for synology and qnap, and enforce
authentication and authorization checks before calling into the actual
serving handlers. This allows us to remove all of the auth logic from
those handlers, since all requests will already be authenticated by that
point.
Also simplify the Synology token redirect handler by using fetch.
Remove the SynologyUser from nodeData, since it was never used in the
frontend anyway.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This commit doesn't change any of the logic, but just organizes the code
a little to prepare for future changes.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Refresh node data when user switches to the web client browser tab.
This helps clean up the auth flow where they're sent to another tab
to authenticate then return to the original tab, where the data
should be refreshed to pick up the login updates.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Indicate to the web client when it is running in CGI mode, and if it is
then cache the csrf key between requests.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Under normal circumstances, you would typically want to keep the default
behavior of requiring secure cookies. In the case of the Tailscale web
client, we are regularly serving on localhost (where secure cookies
don't really matter), and/or we are behind a reverse proxy running on a
network appliance like a NAS or Home Assistant. In those cases, those
devices are regularly accessed over local IP addresses without https
configured, so would not work with secure cookies.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
