For loading testing & profiling the cost of full netmap updates.
Updates #1909
Change-Id: I0afdf5de9967f8d95c7f81d5b531ed1c92c3208f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Use buffer pools for UDP packet forwarding to prepare for increasing the
forwarded UDP packet size for peer path MTU discovery.
Updates #311
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Update github.com/go-json-experiment/json to the latest version
and fix the build in light of some breaking API changes.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The test was sending SIGKILL to containerboot, which results in no
signal propagation down to the bash script that is running as a child
process, thus it leaks.
Minor changes to the test daemon script, so that it cleans up the socket
that it creates on exit, and spawns fewer processes.
Fixestailscale/corp#14833
Signed-off-by: James Tucker <james@tailscale.com>
We're going to need to build a DLL containing custom actions for the installer.
This patch adds the foundations of that capability to dist and gocross.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Replace CanPMTUD() with ShouldPMTUD() to check if peer path MTU discovery should
be enabled, in preparation for adding support for enabling/disabling peer MTU
dynamically.
Updated #311
Signed-off-by: Val <valerie@tailscale.com>
Add an enable/disable argument to setDontFragment() in preparation for dynamic
enable/disable of peer path MTU discovery. Add getDontFragment() to get the
status of the don't fragment bit from a socket.
Updates #311
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Use IPV6_MTU_DISCOVER for setting don't fragment on IPv6 sockets on Linux (was
using IP_MTU_DISCOVER, the IPv4 arg).
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Make the debugknob variable name for enabling peer path MTU discovery match the
env variable name.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
One Quad9 IPv6 address was incorrect, and an additional group needed
adding. Additionally I checked Cloudflare and included source reference
URLs for both.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
In typical k8s setups, the MTU configured on the eth0 interfaces is typically 1500 which
results in packets being dropped when they make it to proxy pods as the tailscale0 interface
has a 1280 MTU.
As the primary use of this functionality is TCP, add iptables based MSS clamping to allow
connectivity.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This would've prevented #9470.
This used to pass, fails as of 9538e9f970, and passes again
once #9472 is in.
Updates #9470
Change-Id: Iab97666f7a318432fb3b6372a177ab50c55d4697
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
9538e9f970 broke LocalBackend.WhoIs
where you can no longer lookup yourself in WhoIs.
This occurs because the LocalBackend.peers map only contains peers.
If we fail to lookup a peer, double-check whether it is ourself.
Fixes#9470
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
It was tailscale.com/ts-tailnet-target-ip, which was pretty
redundant. Change it to tailscale.com/tailnet-ip.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The initial implementation directly mirrored the behavior of Tailscale
exit nodes, where the WireGuard exit node DNS took precedence over other
configuration.
This adjusted implementation treats the WireGuard DNS
resolvers as a lower precedence default resolver than the tailnet
default resolver, and allows split DNS configuration as well.
This also adds test coverage to the existing DNS selection behavior with
respect to default resolvers and split DNS routes for Tailscale exit
nodes above cap 25. There may be some refinement to do in the logic in
those cases, as split DNS may not be working as we intend, though that
would be a pre-existing and separate issue.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
It might as well have been spewing out gibberish. This adds
a nicer output format for us to be able to read and identify
whats going on.
Sample output
```
natV4Config{nativeAddr: 100.83.114.95, listenAddrs: [10.32.80.33], dstMasqAddrs: [10.32.80.33: 407 peers]}
```
Fixestailscale/corp#14650
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Fixestailscale/corp#14747
Signed-off-by: David Anderson <danderson@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: David Anderson <danderson@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
This should allow us to gather a bit more information about errors that
we encounter when creating UPnP mappings. Since we don't have a
"LabelMap" construction for clientmetrics, do what sockstats does and
lazily register a new metric when we see a new code.
Updates #9343
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibb5aadd6138beb58721f98123debcc7273b611ba
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new RawMessage type backed by string instead of the
json.RawMessage which is backed by []byte. The byte slice makes
the generated views be a lot more defensive than the need to be
which we can get around by using a string instead.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR fixes a bug to make sure that we don't allow two configs
exist with duplicate ports
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
