When the portable Monitor creates a winMon via newOSMon, we register
address and route change callbacks with Windows. Once a callback is hit,
it starts a goroutine that attempts to send the event into messagec and returns.
The newly started goroutine then blocks until it can send to the channel.
However, if the monitor is never started and winMon.Receive is never called,
the goroutines remain indefinitely blocked, leading to goroutine leaks and
significant memory consumption in the tailscaled service process on Windows.
Unlike the tailscaled subprocess, the service process creates but never starts
a Monitor.
This PR adds a check within the callbacks to confirm the monitor's active status,
and exits immediately if the monitor hasn't started.
Updates #9864
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This type seems to be a migration shim for TCP tailscaled sockets
(instead of unix/windows pipes). The `port` field was never set, so it
was effectively used as a string (`path` field).
Remove the whole type and simplify call sites to pass the socket path
directly to `safesocket.Connect`.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This logs additional information about what mapping(s) are obtained
during the creation process, including whether we return an existing
cached mapping.
Updates #10597
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I9ff25071f064c91691db9ab0b9365ccc5f948d6e
Currently, we get the "likely home router" gateway IP and then iterate
through all IPs for all interfaces trying to match IPs to determine the
source IP. However, on many platforms we know what interface the gateway
is through, and thus we don't need to iterate through all interfaces
checking IPs. Instead, use the IP address of the associated interface.
This better handles the case where we have multiple interfaces on a
system all connected to the same gateway, and where the first interface
that we visit (as iterated by ForeachInterfaceAddress) isn't also the
default internet route.
Updates #8992
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8632f577f1136930f4ec60c76376527a19a47d1f
Using reflect.MethodByName disables some linked deadcode optimizations
and makes our binaries much bigger.
Difference before/after this commit:
```
-rwxr-xr-x 1 awly awly 30M Dec 19 15:28 tailscaled.after*
-rwxr-xr-x 1 awly awly 43M Dec 19 15:27 tailscaled.before*
```
Fixes#10627
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In this commit, we have updated the build process for our Windows DLLs
to link statically with libgcc, ensuring our Windows DLLs are self-contained.
Updates #10617
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Individual route advertisements that are covered by existing routes are
no longer advertised. If an upstream returns 0.0.0.0, 127.x, and other
common unwanted addresses those are also rejected.
Updates #16425
Signed-off-by: James Tucker <james@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Instead of taking the first UPnP response we receive and using that to
create port mappings, store all received UPnP responses, sort and
deduplicate them, and then try all of them to obtain an external
address.
Updates #10602
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I783ccb1834834ee2a9ecbae2b16d801f2354302f
connector-gen can initially generate connector ACL snippets and
advertise-routes flags for Github and AWS based on their public IP /
domain data.
Updates ENG-2425
Signed-off-by: James Tucker <james@tailscale.com>
Throughout the web UI, we present the tailscale addresses for the
self node. In the case of the node being shared out with a user
from another tailnet, the peer viewer may actually know the node
by a different IP than the node knows itself as (Tailscale IPs
can be configured as desired on a tailnet level). This change
includes two fixes:
1. Present the self node's addresses in the frontend as the addresses
the viewing node knows it as (i.e. the addresses the viewing node
uses to access the web client).
2. We currently redirect the viewer to the Tailscale IPv4 address if
viewing it by MagicDNS name, or any other name that maps to the
Tailscale node. When doing this redirect, which is primarily added
for DNS rebinding protection, we now check the address the peer
knows this node as, and redirect to specifically that IP.
Fixestailscale/corp#16402
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The switch in Conn.runDerpReader() on the derp.ReceivedMessage type
contained cases other than derp.ReceivedPacket that fell through to
writing to c.derpRecvCh, which should only be reached for
derp.ReceivedPacket. This can result in the last/previous
derp.ReceivedPacket to be re-handled, effectively creating a duplicate
packet. If the last derp.ReceivedPacket happens to be a
disco.CallMeMaybe it may result in a disco ping scan towards the
originating peer on the endpoints contained.
The change in this commit moves the channel write on c.derpRecvCh and
subsequent select awaiting the result into the derp.ReceivedMessage
case, preventing it from being reached from any other case. Explicit
continue statements are also added to non-derp.ReceivedPacket cases
where they were missing, in order to signal intent to the reader.
Fixes#10586
Signed-off-by: Jordan Whited <jordan@tailscale.com>
* k8s-operator,cmd/k8s-operator,Makefile,scripts,.github/workflows: add Connector kube CRD.
Connector CRD allows users to configure the Tailscale Kubernetes operator
to deploy a subnet router to expose cluster CIDRs or
other CIDRs available from within the cluster
to their tailnet.
Also adds various CRD related machinery to
generate CRD YAML, deep copy implementations etc.
Engineers will now have to run
'make kube-generate-all` after changing kube files
to ensure that all generated files are up to date.
* cmd/k8s-operator,k8s-operator: reconcile Connector resources
Reconcile Connector resources, create/delete subnetrouter resources in response to changes to Connector(s).
Connector reconciler will not be started unless
ENABLE_CONNECTOR env var is set to true.
This means that users who don't want to use the alpha
Connector custom resource don't have to install the Connector
CRD to their cluster.
For users who do want to use it the flow is:
- install the CRD
- install the operator (via Helm chart or using static manifests).
For Helm users set .values.enableConnector to true, for static
manifest users, set ENABLE_CONNECTOR to true in the static manifest.
Updates tailscale/tailscale#502
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Ensure we don't create Location: header URLs that have leading //, which is a
schema-less reference to arbitrary 3rd-party sites. That is, //example.com/foo
redirects off-site, while /example.com/foo is an on-site path URL.
Fixestailscale/corp#16268
Signed-off-by: Chris Palmer <cpalmer@tailscale.com>
This uses the fact that we've received a frame from a given DERP region
within a certain time as a signal that the region is stil present (and
thus can still be a node's PreferredDERP / home region) even if we don't
get a STUN response from that region during a netcheck.
This should help avoid DERP flaps that occur due to losing STUN probes
while still having a valid and active TCP connection to the DERP server.
RELNOTE=Reduce home DERP flapping when there's still an active connection
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If7da6312581e1d434d5c0811697319c621e187a0
Previously, we would select the first WANIPConnection2 (and related)
client from the root device, without any additional checks. However,
some routers expose multiple UPnP devices in various states, and simply
picking the first available one can result in attempting to perform a
portmap with a device that isn't functional.
Instead, mimic what the miniupnpc code does, and prefer devices that are
(a) reporting as Connected, and (b) have a valid external IP address.
For our use-case, we additionally prefer devices that have an external
IP address that's a public address, to increase the likelihood that we
can obtain a direct connection from peers.
Finally, we split out fetching the root device (getUPnPRootDevice) from
selecting the best service within that root device (selectBestService),
and add some extensive tests for various UPnP server behaviours.
RELNOTE=Improve UPnP portmapping when multiple UPnP services exist
Updates #8364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I71795cd80be6214dfcef0fe83115a5e3fe4b8753
Was previously failing to redirect to the manage client when accessing
the login client with the Tailscale IP.
Updates #10261Fixestailscale/corp#16348
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add a new "Debug" card at the bottom of the details page. It's maybe
premature to add a separate card for this, since all it currently lists
is whether the device is using TUN mode and (for Synology) the DSM
version. But I think it may be helpful to add client connectivity data
(like shown on admin console machine page) as well as a bug report
button. Those can come soon after the 1.56 launch.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
To be safe, use `prefs.ControlURLOrDefault()` rather than the current
`prefs.ControlURL` directly.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Ensure that if getOrCreateChain creates a new chain, it actually returns the created chain
Updates tailscale/tailscale#10399
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Calculate and set the hash of the one inline script we have in
index.html. That script is unlikely to change, so hardcoding the hash
seems fine for now.
Updates #10261
Updates tailscale/corp#16266
Signed-off-by: Will Norris <will@tailscale.com>
