This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.
It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and
perform the necessary modifications to the packet as it passes through tstun.
Currently this only handles ICMP, UDP and TCP traffic.
Subnet routers and Exit Nodes are also unsupported.
Updates tailscale/corp#8020
Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
With a42a594bb3, iOS uses netstack and
hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it.
We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms).
It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb
so we have the spare headroom.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In the future this will cause a node to be unable to join the tailnet
if network logging is enabled.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If the network logging configruation changes (and nothing else)
we will tear down the network logger and start it back up.
However, doing so will lose the router configuration state.
Manually reconfigure it with the routing state.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
There is utility in logging traffic statistics that occurs at the physical layer.
That is, in order to send packets virtually to a particular tailscale IP address,
what physical endpoints did we need to communicate with?
This functionality logs IP addresses identical to
what had always been logged in magicsock prior to #5823,
so there is no increase in PII being logged.
ExtractStatistics returns a mapping of connections to counts.
The source is always a Tailscale IP address (without port),
while the destination is some endpoint reachable on WAN or LAN.
As a special case, traffic routed through DERP will use 127.3.3.40
as the destination address with the port being the DERP region.
This entire feature is only enabled if data-plane audit logging
is enabled on the tailnet (by default it is disabled).
Example of type of information logged:
------------------------------------ Tx[P/s] Tx[B/s] Rx[P/s] Rx[B/s]
PhysicalTraffic: 25.80 3.39Ki 38.80 5.57Ki
100.1.2.3 -> 143.11.22.33:41641 15.40 2.00Ki 23.20 3.37Ki
100.4.5.6 -> 192.168.0.100:41641 10.20 1.38Ki 15.60 2.20Ki
100.7.8.9 -> 127.3.3.40:2 0.20 6.40 0.00 0.00
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This sets up Logger to handle statistics at the magicsock layer,
where we can correlate traffic between a particular tailscale IP address
and any number of physical endpoints used to contact the node
that hosts that tailscale address.
We also export Message and TupleCounts to better document the JSON format
that is being sent to the logging infrastructure.
This commit does NOT yet enable the actual logging of magicsock statistics.
That will be a future commit.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If the wgcfg.Config is specified with network logging arguments,
then Userspace.Reconfig starts up an asynchronous network logger,
which is shutdown either upon Userspace.Close or when Userspace.Reconfig
is called again without network logging or route arguments.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.
Fixes#5743
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Avoid contention from fetching status for all peers, and instead fetch
status for a single peer.
Updates tailscale/coral#72
Signed-off-by: James Tucker <james@tailscale.com>
Hashing []any is slow since hashing of interfaces is slow.
Hashing of interfaces is slow since we pessimistically assume
that cycles can occur through them and start cycle tracking.
Drop the variadic signature of Update and fix callers to pass in
an anonymous struct so that we are hashing concrete types
near the root of the value tree.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We were marking them as gauges, but they are only ever incremented,
thus counter is more appropriate.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This change wires netstack with a hook for traffic coming from the host
into the tun, allowing interception and handling of traffic to quad-100.
With this hook wired, magicDNS queries over UDP are now handled within
netstack. The existing logic in wgengine to handle magicDNS remains for now,
but its hook operates after the netstack hook so the netstack implementation
takes precedence. This is done in case we need to support platforms with
netstack longer than expected.
Signed-off-by: Tom DNetto <tom@tailscale.com>
A subsequent commit implements handling of magicDNS traffic via netstack.
Implementing this requires a hook for traffic originating from the host and
hitting the tun, so we make another hook to support this.
Signed-off-by: Tom DNetto <tom@tailscale.com>
* net/dns, net/dns/resolver, wgengine: refactor DNS request path
Previously, method calls into the DNS manager/resolver types handled DNS
requests rather than DNS packets. This is fine for UDP as one packet
corresponds to one request or response, however will not suit an
implementation that supports DNS over TCP.
To support PRs implementing this in the future, wgengine delegates
all handling/construction of packets to the magic DNS endpoint, to
the DNS types themselves. Handling IP packets at this level enables
future support for both UDP and TCP.
Signed-off-by: Tom DNetto <tom@tailscale.com>
When `setWgengineStatus` is invoked concurrently from multiple
goroutines, it is possible that the call invoked with a newer status is
processed before a call with an older status. e.g. a status that has
endpoints might be followed by a status without endpoints. This causes
unnecessary work in the engine and can result in packet loss.
This patch adds an `AsOf time.Time` field to the status to specifiy when the
status was calculated, which later allows `setWgengineStatus` to ignore
any status messages it receives that are older than the one it has
already processed.
Updates tailscale/corp#2579
Signed-off-by: Maisem Ali <maisem@tailscale.com>
