The netstack code had a bunch of logic to figure out if the LocalBackend should handle an
incoming connection and then would call the function directly on LocalBackend. Move that
logic to LocalBackend and refactor the methods to return conn handlers.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Switch our best address selection to use a scoring-based approach, where
we boost each address based on whether it's a private IP or IPv6.
For users in cloud environments, this biases endpoint selection towards
using an endpoint that is less likely to cost the user money, and should
be less surprising to users.
This also involves updating the tests to not use private IPv4 addresses;
other than that change, the behaviour should be identical for existing
endpoints.
Updates #8097
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I069e3b399daea28be66b81f7e44fc27b2943d8af
Various BSD-derived operating systems including macOS and FreeBSD
require that ping6 be used for IPv6 destinations. The "ping" command
does not understand an IPv6 destination.
FreeBSD 13.x and later do handle IPv6 in the regular ping command,
but also retain a ping6 command. We use ping6 on all versions of
FreeBSD.
Fixes https://github.com/tailscale/tailscale/issues/8225
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change introduces address selection for wireguard only endpoints.
If a endpoint has not been used before, an address is randomly selected
to be used based on information we know about, such as if they are able
to use IPv4 or IPv6. When an address is initially selected, we also
initiate a new ICMP ping to the endpoints addresses to determine which
endpoint offers the best latency. This information is then used to
update which endpoint we should be using based on the best possible
route. If the latency is the same for a IPv4 and an IPv6 address, IPv6
will be used.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Avoid selecting an endpoint as "better" than the current endpoint if the
total latency improvement is less than 1%. This adds some hysteresis to
avoid flapping between endpoints for a minimal improvement in latency.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If8312e1768ea65c4b4d4e13d8de284b3825d7a73
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
TestMonitorMode skips by default, without the --monitor flag, and then
it previously ran forever. This adds an option --monitor-duration flag
that defaults to zero (run forever) but if non-zero bounds how long
the tests runs. This means you can then also use e.g. `go test
--cpuprofile` and capture a CPU/mem profile for a minute or two.
Updates #7621
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, when updating endpoints we would immediately stop
advertising any endpoint that wasn't discovered during
determineEndpoints. This could result in, for example, a case where we
performed an incremental netcheck, didn't get any of our three STUN
packets back, and then dropped our STUN endpoint from the set of
advertised endpoints... which would result in clients falling back to a
DERP connection until the next call to determineEndpoints.
Instead, let's cache endpoints that we've discovered and continue
reporting them to clients until a timeout expires. In the above case
where we temporarily don't have a discovered STUN endpoint, we would
continue reporting the old value, then re-discover the STUN endpoint
again and continue reporting it as normal, so clients never see a
withdrawal.
Updates tailscale/coral#108
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I42de72e7418ab328a6c732bdefc74549708cf8b9
The comment still said *magicsock.Conn implemented wireguard-go conn.Bind.
That wasn't accurate anymore.
A doc #cleanup.
Change-Id: I7fd003b939497889cc81147bfb937b93e4f6865c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we're staying within the netip.Addr/AddrPort consistently and
avoiding allocs/conversions to the legacy net addr types.
Updates #5162
Change-Id: I59feba60d3de39f773e68292d759766bac98c917
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
These tests are passing locally and on CI. They had failed earlier in
the day when first fixing up CI, and it is not immediately clear why. I
have cycled IPv6 support locally, but this should not have a substantial
effect.
Updates #7876
Signed-off-by: James Tucker <jftucker@gmail.com>
We accidentally switched to ./tool/go in
4022796484 which resulted in no longer
running Windows builds, as this is attempting to run a bash script.
I was unable to quickly fix the various tests that have regressed, so
instead I've added skips referencing #7876, which we need to back and
fix.
Updates #7262
Updates #7876
Signed-off-by: James Tucker <james@tailscale.com>
This also adds a bunch of tests for this function to ensure that we're
returning the proper IP(s) in all cases.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0d9d57170dbab5f2bf07abdf78ecd17e0e635399
This makes `omitempty` actually work, and saves bytes in each map response.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Using log.Printf may end up being printed out to the console, which
is not desirable. I noticed this when I was investigating some client
logs with `sockstats: trace "NetcheckClient" was overwritten by another`.
That turns to be harmless/expected (the netcheck client will fall back
to the DERP client in some cases, which does its own sockstats trace).
However, the log output could be visible to users if running the
`tailscale netcheck` CLI command, which would be needlessly confusing.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The lazy initialization of the disco key is not necessary, and
contributes to unnecessary locking and state checking.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
Running tailscaled with the race detector enabled immediately fires on
this field, as it is updated after first read.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
A peer can have IsWireGuardOnly, which means it will not support DERP or
Disco, and it must have Endpoints filled in order to be usable.
In the present implementation only the first Endpoint will be used as
the bestAddr.
Updates tailscale/corp#10351
Co-authored-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Identified in review in #7821 endpoint.discoKey and endpoint.discoShort
are often accessed without first taking endpoint.mu. The arrangement
with endpoint.mu is inconvenient for a good number of those call-sites,
so it is instead replaced with an atomic pointer to carry both pieces of
disco info. This will also help with #7821 that wants to add explicit
checks/guards to disable disco behaviors when disco keys are missing
which is necessarily implicitly mostly covered by this change.
Updates #7821
Signed-off-by: James Tucker <james@tailscale.com>
Make developing derp easier by:
1. Creating an envknob telling clients to use HTTP to connect to derp
servers, so devs don't have to acquire a valid TLS cert.
2. Creating an envknob telling clients which derp server to connect
to, so devs don't have to edit the ACLs in the admin console to add a
custom DERP map.
3. Explaining how the -dev and -a command lines args to derper
interact.
To use this:
1. Run derper with -dev.
2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and
TS_DEBUG_USE_DERP_ADDR=localhost
This will result in the client connecting to derp via HTTP on port
3340.
Fixes#7700
Signed-off-by: Val <valerie@tailscale.com>
This commit implements UDP offloading for Linux. GSO size is passed to
and from the kernel via socket control messages. Support is probed at
runtime.
UDP GSO is dependent on checksum offload support on the egress netdev.
UDP GSO will be disabled in the event sendmmsg() returns EIO, which is
a strong signal that the egress netdev does not support checksum
offload.
Updates tailscale/corp#8734
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This adds the util/sysresources package, which currently only contains a
function to return the total memory size of the current system.
Then, we modify magicsock to scale the number of buffered DERP messages
based on the system's available memory, ensuring that we never use a
value lower than the previous constant of 32.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib763c877de4d0d4ee88869078e7d512f6a3a148d
Noted on #5915 TS_DEBUG_MTU was not used consistently everywhere.
Extract the default into a function that can apply this centrally and
use it everywhere.
Added envknob.Lookup{Int,Uint}Sized to make it easier to keep CodeQL
happy when using converted values.
Updates #5915
Signed-off-by: James Tucker <james@tailscale.com>
This adds support to make exit nodes and subnet routers work
when in scenarios where NAT is required.
It also updates the NATConfig to be generated from a `wgcfg.Config` as
that handles merging prefs with the netmap, so it has the required information
about whether an exit node is already configured and whether routes are accepted.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Use the local context on Impl to check for shut down state in order to
drop rather than inject packets after close has begun.
Netstack sets endpoint.dispatcher to nil during shutdown. After the
recent adjustment in 920ec69241 we now
wait for netstack to fully shutdown before we release tests. This means
that we may continue to accept packets and attempt to inject them, which
we must prevent in order to avoid nil pointer panic.
References google/gvisor#8765Fixes#7715
Signed-off-by: James Tucker <james@tailscale.com>
This commit updates the wireguard-go dependency to pull in fixes for
the tun package, specifically 052af4a and aad7fca.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
* wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer
For testing older client version responses to the PeerGone packet format change.
Updates #4326
Signed-off-by: Val <valerie@tailscale.com>
* derp: remove dead sclient struct member replaceLimiter
Leftover from an previous solution to the duplicate client problem.
Updates #2751
Signed-off-by: Val <valerie@tailscale.com>
* derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here
Extend the PeerGone message type by adding a reason byte. Send a
PeerGone "Not Here" message when an endpoint sends a disco message to
a peer that this server has no record of.
Fixes#4326
Signed-off-by: Val <valerie@tailscale.com>
---------
Signed-off-by: Val <valerie@tailscale.com>
This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and
perform the necessary modifications to the packet as it passes through tstun.
Currently this only handles ICMP, UDP and TCP traffic.
Subnet routers and Exit Nodes are also unsupported.
Updates tailscale/corp#8020
Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
Previously, it would accept all TCP connections and then close the ones
it did not care about. Make it only ever accept the connections that it
cares about.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change adds a ringbuffer to each magicsock endpoint that keeps a
fixed set of "changes"–debug information about what updates have been
made to that endpoint.
Additionally, this adds a LocalAPI endpoint and associated
"debug peer-status" CLI subcommand to fetch the set of changes for a given
IP or hostname.
Updates tailscale/corp#9364
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I34f726a71bddd0dfa36ec05ebafffb24f6e0516a
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
