Commit Graph

32 Commits

Author SHA1 Message Date
James Tucker
3f7313dbdb util/linuxfw,wgengine/router: enable IPv6 configuration when netfilter is disabled
Updates #11434

Signed-off-by: James Tucker <james@tailscale.com>
2024-03-21 16:10:47 -07:00
James Tucker
055117ad45
util/linuxfw: fix support for containers without IPv6 iptables filters (#11381)
There are container environments such as GitHub codespaces that have
partial IPv6 support - routing support is enabled at the kernel level,
but lacking IPv6 filter support in the iptables module.

In the specific example of the codespaces environment, this also has
pre-existing legacy iptables rules in the IPv4 tables, as such the
nascent firewall mode detection will always pick iptables.

We would previously fault trying to install rules to the filter table,
this catches that condition earlier, and disables IPv6 support under
these conditions.

Updates #5621
Updates #11344
Updates #11354

Signed-off-by: James Tucker <james@tailscale.com>
2024-03-08 15:46:21 -08:00
James Tucker
43fba6e04d
util/linuxfw: correct logical error in NAT table check (#11380)
Updates #11344
Updates #11354

Signed-off-by: James Tucker <james@tailscale.com>
2024-03-08 15:35:13 -08:00
Irbe Krumina
90c4067010
util/linuxfw: add container-friendly IPv6 NAT check (#11353)
Remove IPv6 NAT check when routing is being set up
using nftables.
This is unnecessary as support for nftables was
added after support for IPv6.
https://tldp.org/HOWTO/Linux+IPv6-HOWTO/ch18s04.html
https://wiki.nftables.org/wiki-nftables/index.php/Building_and_installing_nftables_from_sources

Additionally, run an extra check for IPv6 NAT support
when the routing is set up with iptables.
This is because the earlier checks rely on
being able to use modprobe and on /proc/net/ip6_tables_names
being populated on start - these conditions are usually not
true in container environments.

Updates tailscale/tailscale#11344

Signed-off-by: Irbe Krumina <irbe@tailscale.com>
2024-03-06 21:53:51 +00:00
Irbe Krumina
097c5ed927
util/linuxfw: insert rather than append nftables DNAT rule (#11303)
Ensure that the latest DNATNonTailscaleTraffic rule
gets inserted on top of any pre-existing rules.

Updates tailscale/tailscale#11281

Signed-off-by: Irbe Krumina <irbe@tailscale.com>
2024-02-29 16:53:43 +00:00
Brad Fitzpatrick
2bd3c1474b util/cmpx: delete now that we're using Go 1.22
Updates #11058

Change-Id: I09dea8e86f03ec148b715efca339eab8b1f0f644
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2024-02-07 18:10:15 -08:00
James Tucker
0b16620b80 .github/workflows: add privileged tests workflow
We had missed regressions from privileged tests not running, now they
can run.

Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
2024-02-07 14:45:22 -08:00
Andrew Lytvynov
2716250ee8
all: cleanup unused code, part 2 (#10670)
And enable U1000 check in staticcheck.

Updates #cleanup

Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
2023-12-21 17:40:03 -08:00
Irbe Krumina
0cdc8e20d6
util/linuxfw: return created chain (#10563)
Ensure that if getOrCreateChain creates a new chain, it actually returns the created chain

Updates tailscale/tailscale#10399

Signed-off-by: Irbe Krumina <irbe@tailscale.com>
2023-12-12 15:55:02 +00:00
Naman Sood
d46a4eced5
util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux (#10370)
* util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux

Updates #9084.

Currently, we have to tell users to manually open UDP ports on Linux when
certain firewalls (like ufw) are enabled. This change automates the process of
adding and updating those firewall rules as magicsock changes what port it
listens on.

Signed-off-by: Naman Sood <mail@nsood.in>
2023-12-05 18:12:02 -05:00
Naman Sood
0a59754eda linuxfw,wgengine/route,ipn: add c2n and nodeattrs to control linux netfilter
Updates tailscale/corp#14029.

Signed-off-by: Naman Sood <mail@nsood.in>
2023-12-05 14:22:02 -05:00
Maisem Ali
62d580f0e8 util/linuxfw: add missing error checks in tests
This would surface as panics when run on Fly. Still fail, but at least don't panic.

Updates #10003

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-10-28 09:44:53 -07:00
Maisem Ali
c3a8e63100 util/linuxfw: add additional nftable detection logic
We were previously using the netlink API to see if there are chains/rules that
already exist. This works fine in environments where there is either full
nftable support or no support at all. However, we have identified certain
environments which have partial nftable support and the only feasible way of
detecting such an environment is to try to create some of the chains that we
need.

This adds a check to create a dummy postrouting chain which is immediately
deleted. The goal of the check is to ensure we are able to use nftables and
that it won't error out later. This check is only done in the path where we
detected that the system has no preexisting nftable rules.

Updates #5621
Updates #8555
Updates #8762

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-10-18 13:39:55 -07:00
Maisem Ali
b47cf04624 util/linuxfw: fix broken tests
These tests were broken at HEAD. CI currently does not run these
as root, will figure out how to do that in a followup.

Updates #5621
Updates #8555
Updates #8762

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-10-18 13:39:55 -07:00
Maisem Ali
fbfee6a8c0 cmd/containerboot: use linuxfw.NetfilterRunner
This migrates containerboot to reuse the NetfilterRunner used
by tailscaled instead of manipulating iptables rule itself.
This has the added advantage of now working with nftables and
we can potentially drop the `iptables` command from the container
image in the future.

Updates #9310

Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-10-11 12:23:52 -07:00
Maisem Ali
aad3584319 util/linuxfw: move fake runner into pkg
This allows using the fake runner in different packages
that need to manage filter rules.

Updates #cleanup

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-10-11 11:48:43 -07:00
Maisem Ali
05a1f5bf71 util/linuxfw: move detection logic
Just a refactor to consolidate the firewall detection logic in a single
package so that it can be reused in a later commit by containerboot.

Updates #9310

Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-10-10 20:29:24 -07:00
James Tucker
ba6ec42f6d util/linuxfw: add missing input rule to the tailscale tun
Add an explicit accept rule for input to the tun interface, as a mirror
to the explicit rule to accept output from the tun interface.

The rule matches any packet in to our tun interface and accepts it, and
the rule is positioned and prioritized such that it should be evaluated
prior to conventional ufw/iptables/nft rules.

Updates #391
Fixes #7332
Updates #9084

Signed-off-by: James Tucker <james@tailscale.com>
2023-10-10 17:22:47 -07:00
James Tucker
2066f9fbb2 util/linuxfw: fix crash in DelSNATRule when no rules are found
Appears to be a missing nil handling case. I looked back over other
usage of findRule and the others all have nil guards. findRule returns
nil when no rules are found matching the arguments.

Fixes #9553
Signed-off-by: James Tucker <james@tailscale.com>
2023-09-27 12:51:27 -07:00
Craig Rodrigues
8452d273e3 util/linuxfw: Fix comment which lists supported linux arches
Only arm64 and amd64 are supported

Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>
2023-09-07 16:49:50 -07:00
Craig Rodrigues
8683ce78c2 client/web, clientupdate, util/linuxfw, wgengine/magicsock: Use %v verb for errors
Replace %w verb with %v verb when logging errors.
Use %w only for wrapping errors with fmt.Errorf()

Fixes: #9213

Signed-off-by: Craig Rodrigues <rodrigc@crodrigues.org>
2023-09-02 14:06:48 -07:00
Brad Fitzpatrick
1b223566dd util/linuxfw: fix typo in unexported doc comment
And flesh it out and use idiomatic doc style ("whether" for bools)
and end in a period while there anyway.

Updates #cleanup

Change-Id: Ieb82f13969656e2340c3510e7b102dc8e6932611
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2023-08-21 10:14:28 -07:00
KevinLiang10
b040094b90 util/linuxfw: reorganize nftables rules to allow it to work with ufw
This commit tries to mimic the way iptables-nft work with the filewall rules. We
follow the convention of using tables like filter, nat and the conventional
chains, to make our nftables implementation work with ufw.

Updates: #391

Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
2023-08-18 18:24:05 -07:00
Brad Fitzpatrick
7a5263e6d0 util/linuxfw: rename ErrorFWModeNotSupported
Go style is for error variables to start with "err" (or "Err")
and for error types to end in "Error".

Updates #cleanup

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2023-08-10 09:27:05 -07:00
KevinLiang10
ae63c51ff1 wgengine/router: add auto selection heuristic for iptables/nftables
This commit replaces the TS_DEBUG_USE_NETLINK_NFTABLES envknob with
a TS_DEBUG_FIREWALL_MODE that should be set to either 'iptables' or
'nftables' to select firewall mode manually, other wise tailscaled
will automatically choose between iptables and nftables depending on
environment and system availability.

updates: #319
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
2023-08-08 14:59:06 -04:00
Brad Fitzpatrick
88cc0ad9f7 util/linuxfw: remove yet-unused code to fix linux/arm64 crash
The util/linuxfw/iptables.go had a bunch of code that wasn't yet used
(in prep for future work) but because of its imports, ended up
initializing code deep within gvisor that panicked on init on arm64
systems not using 4KB pages.

This deletes the unused code to delete the imports and remove the
panic. We can then cherry-pick this back to the branch and restore it
later in a different way.

A new test makes sure we don't regress in the future by depending on
the panicking package in question.

Fixes #8658

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2023-07-20 23:18:40 -07:00
KevinLiang10
a3c7b21cd1 util/linuxfw: add nftables support
This commit adds nftable rule injection for tailscaled. If tailscaled is
started with envknob TS_DEBUG_USE_NETLINK_NFTABLES = true, the router
will use nftables to manage firewall rules.

Updates: #391

Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
2023-07-19 14:33:23 -04:00
KevinLiang10
6ebd87c669 util/linuxfw: add new arch build constraints
Exclide GOARCHs including: mips, mips64, mips64le, mipsle, riscv64.
These archs are not supported by gvisor.dev/gvisor/pkg/hostarch.

Fixes: #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
2023-06-30 18:22:15 -04:00
KevinLiang10
243ce6ccc1 util/linuxfw: decoupling IPTables logic from linux router
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.

For #391

Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
2023-06-27 19:54:27 -04:00
Brad Fitzpatrick
eefee6f149 all: use cmpx.Or where it made sense
I left a few out where writing it explicitly was better
for various reasons.

Updates #8296

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2023-06-07 22:06:24 -07:00
Andrew Dunham
6927a844b1 util/linuxfw: add build constraints excluding GOARCH=arm
This isn't currently supported due to missing support in upstream
dependencies, and also we don't use this package anywhere right now.
Just conditionally skip this for now.

Fixes #7268

Change-Id: Ie7389c2c0816b39b410c02a7276051a4c18b6450
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
2023-02-14 06:00:03 +00:00
Andrew Dunham
ba48ec5e39 util/linuxfw: initial implementation of package
This package is an initial implementation of something that can read
netfilter and iptables rules from the Linux kernel without needing to
shell out to an external utility; it speaks directly to the kernel using
syscalls and parses the data returned.

Currently this is read-only since it only knows how to parse a subset of
the available data.

Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Change-Id: Iccadf5dcc081b73268d8ccf8884c24eb6a6f1ff5
2023-02-09 14:20:24 -05:00