If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.
Updates #1543
Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This lets the control plane can make HTTP requests to nodes.
Then we can use this for future things rather than slapping more stuff
into MapResponse, etc.
Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So next time something like #5340 happens we can identify all affected
nodes and have the control plane send them health warnings.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Needed to identify the node. A serverside-check the machine key (used
to authenticate the noise session) is that of the specified NodeID
ensures the authenticity of the request.
Signed-off-by: Tom DNetto <tom@tailscale.com>
We're going to want to enable audit logging on a per-Tailnet basis. When this
happens, we want control to inform the Tailnet's clients of this capability.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
I documented capver 37 in 4ee64681a but forgot to bump the actual
constant. I've done this previously too, so add a test to prevent
it from happening again.
Change-Id: I6f7659db1243d30672121a384beb386d9f9f5b98
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- A network-lock key is generated if it doesn't already exist, and stored in the StateStore. The public component is communicated to control during registration.
- If TKA state exists on the filesystem, a tailnet key authority is initialized (but nothing is done with it for now).
Signed-off-by: Tom DNetto <tom@tailscale.com>
This adds the inverse to CapabilityFileSharingSend so that senders can
identify who they can Taildrop to.
Updates #2101
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a lighter mechanism for endpoint updates from control.
Change-Id: If169c26becb76d683e9877dc48cfb35f90cc5f24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane server doesn't send these to modern clients so we
don't need them in the tree. The server has its own serialization code
to generate legacy MapResponses when needed.
Change-Id: Idd1e5d96ddf9d4306f2da550d20b77f0c252817a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This lets us distinguish "no IPv6 because the device's ISP doesn't
offer IPv6" from "IPv6 is unavailable/disabled in the OS".
Signed-off-by: David Anderson <danderson@tailscale.com>
And rewrite cloud detection to try to do only zero or one metadata
discovery request for all clouds, only doing a first (or second) as
confidence increases. Work remains for Windows, but a start.
And add Cloud to tailcfg.Hostinfo, which helped with testing using
"tailcfg debug hostinfo".
Updates #4983 (Linux only)
Updates #4984
Change-Id: Ib03337089122ce0cb38c34f724ba4b4812bc614e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a helper to check if Tailscale SSH is enabled. We're
currently checking the SSH_HostKeys field in a few places, but later
plan to add an explicit bool. This helper makes the check and any future
changes easier.
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
goimports is a superset of gofmt that also groups imports.
(the goimports tool also adds/removes imports as needed, but that
part is disabled here)
Change-Id: Iacf0408dfd9497f4ed3da4fa50e165359ce38498
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No CLI support yet. Just the curl'able version if you know the peerapi
port. (like via a TSMP ping)
Updates #306
Change-Id: I0662ba6530f7ab58d0ddb24e3664167fcd1c4bcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
From the machines tab its hard to differenciate desktop Linux installs from
server Linux installs. Transmitting this information should make this
determination a lot easier.
Due to the reality that tailscaled is likely a system process, the standard
checks based on XDG_SESSION_TYPE or DISPLAY environment variables are not
possible (those variables won't be set). Instead, we look for listening
unix sockets that are typical of desktop installs.
Signed-off-by: Tom DNetto <tom@tailscale.com>
For people running self-hosted control planes who want a global
opt-out knob instead of running their own logcatcher.
Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The default is still users can debug their own nodes. But like
cd916b728b did, this adds support for admins to grant additional
capabilities with the new tailcfg.CapabilityDebugPeer cap.
Updates #4217
Change-Id: Ifce3d9a1f8e8845797970a4f97b393194663d35f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Controlled by server-sent capability policy.
To be initially used for SSH servers to record sessions to other
nodes. Not yet productized into something user-accessible. (Notably,
the list of Taildrop targets from the sender side isn't augmented
yet.) This purely permits expanding the set of expands a node will
accept a drop from.
Updates #3802
Updates #4217
Change-Id: Id7a5bccd686490f8ef2cdc7dae7c07c440dc0085
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailcfg.PingResponse formalizes the TSMP & disco response message, and
controlclient is wired to send POST responses containing
tailcfg.PingResponse for TSMP and disco PingRequests.
Updates tailscale/corp#754
Signed-off-by: James Tucker <james@tailscale.com>
Also make IPPrefixSliceOf use Slice[netaddr.IPPrefix] as it also
provides additional functions besides the standard ones provided by
Slice[T].
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And add a CapabilityVersion type, primarily for documentation.
This makes MapRequest.Version, RegisterRequest.Version, and
SetDNSRequest.Version all use the same version, which will avoid
confusing in the future if Register or SetDNS ever changed their
semantics on Version change. (Currently they're both always 1)
This will requre a control server change to allow a
SetDNSRequest.Version value other than 1 to be deployed first.
Change-Id: I073042a216e0d745f52ee2dbc45cf336b9f84b7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise omitempty doesn't work.
This is wire-compatible with a non-pointer type, so switching
is safe, now and in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
(The name SSH_HostKeys is bad but SSHHostKeys is worse.)
Updates #3802
Change-Id: I2a889019c9e8b065b668dd58140db4fcab868a91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And log it when provided in map responses.
The test uses the date on which I joined Tailscale. :)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This leaves behind a type alias and associated constructor, to allow
for gradual switchover.
Updates #3206.
Signed-off-by: David Anderson <danderson@tailscale.com>
Temporary until #3206 goes away, but having changed the marshal/unmarshal
implementation I got nervous about the new one doing the correct thing.
Thankfully, the test says it does.
Signed-off-by: David Anderson <danderson@tailscale.com>
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.
This also allows us to tighten the "no allocs"
test in wgengine/filter.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
So js/wasm clients can log in for a bit using regular Gmail/GitHub auth
without using an ephemeral key but still have their node cleaned up
when they're done.
Updates #3157
Change-Id: I49e3d14e9d355a9b8bff0ea810b0016bfe8d47f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Complete with converters to all the other types that represent a
node key today, so the new type can gradually subsume old ones.
Updates #3206
Signed-off-by: David Anderson <danderson@tailscale.com>
The "go generate" command blindly looks for "//go:generate" anywhere
in the file regardless of whether it is truly a comment.
Prevent this false positive in cloner.go by mangling the string
to look less like "//go:generate".
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
So if the control plane knows that something's broken about the node, it can
include problem(s) in MapResponse and "tailscale status" will show it.
(and GUIs in the future, as it's in ipnstate.Status/JSON)
This also bumps the MapRequest.Version, though it's not strictly
required. Doesn't hurt.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Spelling out the command to run for every type
means that changing the command makes for a large, repetitive diff.
Stop doing that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
The DERPTestPort int meant two things before: which port to use, and
whether to disable TLS verification. Users would like to set the port
without disabling TLS, so break it into two options.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a flag to derp maps which specifies that default Tailscale DERP servers should not be
used. If true and there are entries in this map, it indicates that the entries in this map
should take precedent and not hit any of tailscale's DERP servers.
This change is backwards compatible, as the default behavior should be false.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
In order to clone DERPMaps, it was necessary to extend the cloner so that it supports
nested pointers inside of maps which are also cloneable. This also adds cloning for DERPRegions
and DERPNodes because they are on DERPMap's maps.
Signed-off-by: julianknodt <julianknodt@gmail.com>
Add MarshalText-like appending variants. Like:
https://pkg.go.dev/inet.af/netaddr#IP.AppendTo
To be used by @josharian's pending deephash optimizations.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This function accounted for ~1% of all allocs by tailscaled.
It is trivial to improve, so may as well.
name old time/op new time/op delta
KeyMarshalText-8 197ns ± 0% 47ns ± 0% -76.12% (p=0.016 n=4+5)
name old alloc/op new alloc/op delta
KeyMarshalText-8 200B ± 0% 80B ± 0% -60.00% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
KeyMarshalText-8 5.00 ± 0% 1.00 ± 0% -80.00% (p=0.008 n=5+5)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
And fix PeerSeenChange bug where it was ignored unless there were
other peer changes.
Updates tailscale/corp#1574
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Track endpoints internally with a new tailcfg.Endpoint type that
includes a typed netaddr.IPPort (instead of just a string) and
includes a type for how that endpoint was discovered (STUN, local,
etc).
Use []tailcfg.Endpoint instead of []string internally.
At the last second, send it to the control server as the existing
[]string for endpoints, but also include a new parallel
MapRequest.EndpointType []tailcfg.EndpointType, so the control server
can start filtering out less-important endpoint changes from
new-enough clients. Notably, STUN-discovered endpoints can be filtered
out from 1.6+ clients, as they can discover them amongst each other
via CallMeMaybe disco exchanges started over DERP. And STUN endpoints
change a lot, causing a lot of MapResposne updates. But portmapped
endpoints are worth keeping for now, as they they work right away
without requiring the firewall traversal extra RTT dance.
End result will be less control->client bandwidth. (despite negligible
increase in client->control bandwidth)
Updates tailscale/corp#1543
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's currently unused, and no longer makes sense with the upcoming
DNS infrastructure. Keep it in tailcfg for now, since we need protocol
compat for a bit longer.
Signed-off-by: David Anderson <danderson@tailscale.com>
Old macOS clients required we populate this field to a non-null
value so we were unable to remove this field before.
Instead, keep the field but change its type to a custom empty struct
that can marshal/unmarshal JSON. And lock it in with a test.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The code is not obviously better or worse, but this makes the little warning
triangle in my editor go away, and the distraction removal is worth it.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
control/controlclient: sign RegisterRequest
Some customers wish to verify eligibility for devices to join their
tailnets using machine identity certificates. TLS client certs could
potentially fulfill this role but the initial customer for this feature
has technical requirements that prevent their use. Instead, the
certificate is loaded from the Windows local machine certificate store
and uses its RSA public key to sign the RegisterRequest message.
There is room to improve the flexibility of this feature in future and
it is currently only tested on Windows (although Darwin theoretically
works too), but this offers a reasonable starting place for now.
Updates tailscale/coral#6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
In f45a9e291b (2021-03-04), I tried to bump CurrentMapRequestVersion
to 12 but only documented the meaning of 12 but forgot to actually
increase it from 11.
Mapver 11 was added in ea49b1e811 (2021-03-03).
Fix this in its own commit so we can cherry-pick it to the 1.6 release
branch.
So a region can be used if needed, but won't be STUN-probed or used as
its home.
This gives us another possible debugging mechanism for #1310, or can
be used as a short-term measure against DERP flip-flops for people
equidistant between regions if our hysteresis still isn't good enough.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So the control server can test whether a client's actually present.
Most clients are over HTTP/2, so these pings (to the same host) are
super cheap.
This mimics the earlier goroutine dump mechanism.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit da4ec54756.
Since v6 got disabled for Windows nodes, I need the debug flag back
to figure out why it was broken.
Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Consolidates the node display name logic from each of the clients into
tailcfg.Node. UI clients can use these names directly, rather than computing
them independently.
Previously the client had heuristics to calculate which DNS search domains
to set, based on the peers' names. Unfortunately that prevented us from
doing some things we wanted to do server-side related to node sharing.
So, bump MapRequest.Version to 9 to signal that the client only uses the
explicitly configured DNS search domains and doesn't augment it with its own
list.
Updates tailscale/corp#1026
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a replacement for the key-related parts
of the wireguard-go wgcfg package.
This is almost a straight copy/paste from the wgcfg package.
I have slightly changed some of the exported functions and types
to avoid stutter, added and tweaked some comments,
and removed some now-unused code.
To avoid having wireguard-go depend on this new package,
wgcfg will keep its key types.
We translate into and out of those types at the last minute.
These few remaining uses will be eliminated alongside
the rest of the wgcfg package.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
For now, the server will only send v6 configuration to mapversion 8 clients
as part of an early-adopter program, while we verify that the functionality
is robust.
Signed-off-by: David Anderson <danderson@tailscale.com>
After mapver 5's incremental netmap updates & user profiles, much of
the remaining bandwidth for streamed MapResponses were redundant,
unchanged PacketFilters. So make MapRequest.Version 6 mean that nil
means unchanged from the previous value.
Noticed these in MapResponses to clients.
MachineAuthorized was set true, but once we fix the coordination server
to zero out that field, then it can be omittted.
The cloner tool adds static checks that the Clone methods are up to
date, so failing to update Clone causes a compiler error.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
These accidentally make the tag syntax more flexible than was intended,
which will create forward compatibility problems later. Let's go back
to the old stricter parser.
Revert "cmd/tailscale/cli: fix double tag: prefix in tailscale up"
Revert "cmd/tailscale/cli, tailcfg: allow tag without "tag:" prefix in 'tailscale up'"
This reverts commit a702921620.
This reverts commit cd07437ade.
Affects #861.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
In 1.0, subnet relays were not specially handled when WPAD+PAC was
present on the network.
In 1.2, on Windows, subnet relays were disabled if WPAD+PAC was
present. That was what some users wanted, but not others.
This makes it configurable per domain, reverting back to the 1.0
default state of them not being special. Users who want that behavior
can then enable it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also replaces the IPv6Overlay bool with use of DebugFlags, since
it's currently an experimental configuration.
Signed-off-by: David Anderson <danderson@tailscale.com>
I was going to make support for this advertised from the client, but
turns out only "tailscale status" even uses the UserProfiles field and
fails gracefully (omits that field) if a user profile for a user is
missing, so I think we can just reuse the DeltaPeers field from the
client to ask the control server to also delta encode the user
profiles.
For the few users running 1.1.x (unstable) versions between DeltaPeers
support (1.1.82) and this (~1.1.541), they'll just sometimes have
missing names in "tailscale status --json" or "tailscale status --web"
(the only places the UserProfile is used).
