Add exit node selector (in full management client only) that allows
for advertising as an exit node, or selecting another exit node on
the Tailnet for use.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This creates a new /api/up endpoint which is exposed in the login
client, and is solely focused on logging in. Login has been removed from
the nodeUpdate endpoint.
This also adds support in the LoginClientView for a stopped node that
just needs to reconnect, but not necessarily reauthenticate. This
follows the same pattern in `tailscale up` of just setting the
WantRunning user pref.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This change removes the existing debug-web-client localapi endpoint
and replaces it with functions passed directly to the web.ServerOpts
when constructing a web.ManageServerMode client.
The debug-web-client endpoint previously handled making noise
requests to the control server via the /machine/webclient/ endpoints.
The noise requests must be made from tailscaled, which has the noise
connection open. But, now that the full client is served from
tailscaled, we no longer need to proxy this request over the localapi.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
When the viewing user is accessing a webclient not over Tailscale,
they must connect over Tailscale before being able to log into the
full management client, which is served over TS. This change adds
a check that the user is able to access the node's tailscale IP.
If not able to, the signin button is disabled. We'll also be adding
Copy here to help explain to the user that they must connect to
Tailscale before proceeding.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
I don't believe this has ever worked, since we didn't allow POST
requests in the login client. But previously, we were primarily using
the legacy client, so it didn't really matter. Now that we've removed
the legacy client, we have no way to login.
This fixes the login client, allowing it to login, but it still needs to
be refactored to expose a dedicated login method, without exposing all
the node update functionality.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
No longer using this! Readonly state fully managed via auth endpoint.
Also getting rid of old Legacy server mode.
A #cleanup
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We currently disable the exit-node drop down selector when the user is
in read-only mode, but we missed disabling the "Disable" button also.
Previously, it would display an error when clicked.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Move Header component inside Router so that links are relative to the
router base URL.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
In production, the asset handler is receiving requests for pages like
/details, which results in a 404. Instead, if we know the requested file
does not exist, serve the main index page and let wouter route it
appropriately on the frontend.
Updates tailscale/corp/#14335
Signed-off-by: Will Norris <will@tailscale.com>
After logging in, the `?check=now` query string is still present if it
was passed. Reloading the page causes a new check mode to be triggered,
even though the user has an active session. Only trigger the automatic
check mode if the user is not already able to manage the device.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Fills /details page with real values, passed back from the /data
endpoint.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Initial addition of device details view on the frontend. A little
more backend piping work to come to fill all of the detail fields,
for now using placeholders.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We render the readonly view in two situations:
- the client is in login mode, and the device is connected
- the client is in manage mode, but the user does not yet have a session
If the user is not authenticated, and they are not currently on the
Tailscale IP address, render a "Manage" button that will take them to
the Tailcale IP of the device and immediately start check mode.
Still to do is detecting if they have connectivity to the Tailscale IP,
and disabling the button if not.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Previously had HMR websocket set to run from a different port
than the http proxy server. This was an old setting carried over
from the corp repo admin panel config. It's messing with hot
reloads when run from the tailscaled web client, as it keeps
causing the full page to refresh each time a connection is made.
Switching back to the default config here fixes things.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Don't return CSP headers in dev mode, since that includes a bunch of
extra things like the vite server.
Allow images from any source, which is needed to load user profile
images.
Allow 'unsafe-inline' for various inline scripts and style react uses.
We can eliminate this by using CSP nonce or hash values, but we'll need
to look into the best way to handle that. There appear to be several
react plugins for this, but I haven't evaluated any of them.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Require that requests to servers in manage mode are made to the
Tailscale IP (either ipv4 or ipv6) or quad-100. Also set various
security headers on those responses. These might be too restrictive,
but we can relax them as needed.
Allow requests to /ok (even in manage mode) with no checks. This will be
used for the connectivity check from a login client to see if the
management client is reachable.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
Splits auth session creation into two new endpoints:
/api/auth/session/new - to request a new auth session
/api/auth/session/wait - to block until user has completed auth url
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Avoids the need to pipe a web client dev flag through the tailscaled
command.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Adds a new Mode to the web server, indicating the specific
scenario the constructed server is intended to be run in. Also
starts filling this from the cli/web and ipn/ipnlocal callers.
From cli/web this gets filled conditionally based on whether the
preview web client node cap is set. If not set, the existing
"legacy" client is served. If set, both a login/lobby and full
management client are started (in "login" and "manage" modes
respectively).
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This completes the migration to setting up authentication state in the
client first before fetching any node data or rendering the client view.
Notable changes:
- `authorizeRequest` is now only enforced on `/api/*` calls (with the
exception of /api/auth, which is handled early because it's needed to
initially setup auth, particularly for synology)
- re-separate the App and WebClient components to ensure that auth is
completed before moving on
- refactor platform auth (synology and QNAP) to fit into this new
structure. Synology no longer returns redirect for auth, but returns
authResponse instructing the client to fetch a SynoToken
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
When the /api/auth response indicates that synology auth is needed,
fetch the SynoToken and store it for future API calls. This doesn't yet
update the server-side code to set the new SynoAuth field.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
For now this is effectively a noop, since only the ManagementClientView
uses the auth data. That will change soon.
Updates tailscale/corp#14335
Signed-off-by: Will Norris <will@tailscale.com>
This commit makes the following structural changes to the web
client interface. No user-visible changes.
1. Splits login, legacy, readonly, and full management clients into
their own components, and pulls them out into their own view files.
2. Renders the same Login component for all scenarios when the client
is not logged in, regardless of legacy or debug mode. Styling comes
from the existing legacy login, which is removed from legacy.tsx
now that it is shared.
3. Adds a ui folder to hold non-Tailscale-specific components,
starting with ProfilePic, previously housed in app.tsx.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Allows for serving the web interface from tailscaled, with the
ability to start and stop the server via localapi endpoints
(/web/start and /web/stop).
This will be used to run the new full management web client,
which will only be accessible over Tailscale (with an extra auth
check step over noise) from the daemon. This switch also allows
us to run the web interface as a long-lived service in environments
where the CLI version is restricted to CGI, allowing us to manage
certain auth state in memory.
ipn/ipnlocal/web is stubbed out in ipn/ipnlocal/web_stub for
ios builds to satisfy ios restriction from adding "text/template"
and "html/template" dependencies.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Previously returned errTaggedSource in the case that of any tagged
source. Now distinguishing whether the source was local or remote.
We'll be presenting the two cases with varying copy on the frontend.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This commit makes two changes to the web client auth flow error
handling:
1. Properly passes back the error code from the noise request from
the localapi. Previously we were using io.Copy, which was always
setting a 200 response status code.
2. Clean up web client browser sessions on any /wait endpoint error.
This avoids the user getting in a stuck state if something goes
wrong with their auth path.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Stores ID from tailcfg.WebClientAuthResponse in browser session
data, and uses ID to hit control server /wait endpoint.
No longer need the control url cached, so removed that from Server.
Also added optional timeNow field, initially to manage time from
tests.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Connects serveTailscaleAuth to the localapi webclient endpoint
and pipes auth URLs and session cookies back to the browser to
redirect users from the frontend.
All behind debug flags for now.
Updates tailscale/corp#14335
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
