Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
On `tailscale set --auto-update`, set the Sparkle plist option for it.
Also make macsys report not supporting auto-updates over c2n, since they
will be triggered by Sparkle locally.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In the sandboxed app from the app store, we cannot check
`/Library/Preferences/com.apple.commerce.plist` or run `softwareupdate`.
We can at most print a helpful message and open the app store page.
Also, reenable macsys update function to mark it as supporting c2n
updates. macsys support in `tailscale update` was fixed.
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Similar to Arch support, use the latest version info from the official
`apk` repo and don't offer explicit track or version switching.
Add detection for Alpine Linux in version/distro along the way.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Current code will set the "dirty" field of VersionInfo always "true"
if vcs.modified flag is there. No matter whether the flag is "true" or
"false". It will make sense to set this field due to vcs.modified
value, not only the existence of the key.
Signed-off-by: Chenyang Gao <gps949@outlook.com>
I thought our versioning scheme would make go.mod include a commit hash
even on stable builds. I was wrong. Fortunately, the rest of this code
wants anything that 'git rev-parse' understands (to convert it into a full
git hash), and tags qualify.
Signed-off-by: David Anderson <danderson@tailscale.com>
WSL has started to set the eth0 default route interface default to 1280
MTU, which is too low to carry 1280 byte packets from tailscale0 once
wrapped in WireGuard. The change down to 1280 is very likely smaller
than necessary for almost all users. We can not easily determine the
ideal MTU, but if all the preconditions match, we raise the MTU to 1360,
which is just enough for Tailscale traffic to work.
Updates #4833
Updates #7346
Signed-off-by: James Tucker <james@tailscale.com>
With this change, you can collect version info from either a git
checkout of the tailscale.com Go module (this repo), or a git
checkout of a repo that imports the tailscale.com Go module.
Signed-off-by: David Anderson <danderson@tailscale.com>
Before (note attempted use of absent date and commit hash):
"short": "1.37.0-dev",
"long": "1.37.0-dev-t",
After:
"short": "1.37.0-ERR-BuildInfo",
"long": "1.37.0-ERR-BuildInfo",
Signed-off-by: David Anderson <danderson@tailscale.com>
Commit 59c254579e moved a lot of work
from functions that could be eliminated at compile time (because
tests against runtime.GOOS are compile-time constant), into code
that must always run before main().
So, revert that, and instead optimize the package only by moving the
remaining string processing code behind sync.Onces.
Signed-off-by: David Anderson <danderson@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Add `tailscale version --json` JSON output mode. This will be used
later for a double-opt-in (per node consent like Tailscale SSH +
control config) to let admins do remote upgrades via `tailscale
update` via a c2n call, which would then need to verify the
cmd/tailscale found on disk for running tailscale update corresponds
to the running tailscaled, refusing if anything looks amiss.
Plus JSON output modes are just nice to have, rather than parsing
unstable/fragile/obscure text formats.
Updates #6995
Updates #6907
Change-Id: I7821ab7fbea4612f4b9b7bdc1be1ad1095aca71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Go now includes the GOROOT bin directory in $PATH while running tests
and generate, so it is no longer necessary to construct a path using
runtime.GOROOT().
Fixes#6689
Signed-off-by: James Tucker <james@tailscale.com>
Allows a dev built to provide GitCommit and have the short hash
computed correctly, even if the Go embedded build info lacks a
git commit.
Signed-off-by: David Anderson <dave@natulte.net>
Resolves a TODO in the code noted while discussing QNAP defaults.
Tested on DSM6 and DSM7.
Change-Id: Icce03ff41fafd7b3a358cfee16f2ed13d5cc3c5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was previously only invoked from the CLI, which only runs from the
main .app. However, starting with #6022 we also invoke it from the
network extension.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal here is to
1. make it so that the number doesn't diverge between the various places
we had it defined
2. not define the number in corp, only in oss
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is for use by the Windows GUI client to log via when an
exit node is in use, so the logs don't go out via the exit node and
instead go directly, like tailscaled's. The dialer tried to do that
in the unprivileged GUI by binding to a specific interface, but the
"Internet Kill Switch" installed by tailscaled for exit nodes
precludes that from working and instead the GUI fails to dial out.
So, go through tailscaled (with a CONNECT request) instead.
Fixestailscale/corp#3169
Change-Id: I17a8efdc1d4b8fed53a29d1c19995592b651b215
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(Fix to 31e4f60047)
The 31e4f60047 change accidentally
made it always prepend the VERSION.txt, even when it was already
link-stamped properly.
Updates #81
Change-Id: I6cdcff096c25d92d566ad3ac1de5771c7384daea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are a few remaining uses of testing.AllocsPerRun:
Two in which we only log the number of allocations,
and one in which dynamically calculate the allocations
target based on a different AllocsPerRun run.
This also allows us to tighten the "no allocs"
test in wgengine/filter.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Temporary measure until we switch to Go 1.18.
$ go run ./cmd/tailscale version
1.17.0-date.20211022
go version: go1.17
Updates #81
Change-Id: Ic82ebffa5f46789089e5fb9810b3f29e36a47f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
