This populates DNS suffixes ("ts.net", etc) in /etc/resolver/* files
to point to 100.100.100.100 so MagicDNS works.
It also sets search domains.
Updates #4276
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
$ tailscale debug via 0xb 10.2.0.0/16
fd7a:115c:a1e0:b1a:0🅱️a02:0/112
$ tailscale debug via fd7a:115c:a1e0:b1a:0🅱️a02:0/112
site 11 (0xb), 10.2.0.0/16
Previously: 3ae701f0eb
This adds a little debug tool to do CIDR math to make converting between
those ranges easier for now.
Updates #3616
Change-Id: I98302e95d17765bfaced3ecbb71cbd43e84bff46
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In cases where tailscale is operating behind a MITM proxy, we need to consider
that a lot more of the internals of our HTTP requests are visible and may be
used as part of authorization checks. As such, we need to 'behave' as closely
as possible to ideal.
- Some proxies do authorization or consistency checks based the on Host header
or HTTP URI, instead of just the IP/hostname/SNI. As such, we need to
construct a `*http.Request` with a valid URI everytime HTTP is going to be
used on the wire, even if its over TLS.
Aside from the singular instance in net/netcheck, I couldn't find anywhere
else a http.Request was constructed incorrectly.
- Some proxies may deny requests, typically by returning a 403 status code. We
should not consider these requests as a valid latency check, so netcheck
semantics have been updated to consider >299 status codes as a failed probe.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Two changes in one:
* make DoH upgrades an explicitly scheduled send earlier, when we come
up with the resolvers-and-delay send plan. Previously we were
getting e.g. four Google DNS IPs and then spreading them out in
time (for back when we only did UDP) but then later we added DoH
upgrading at the UDP packet layer, which resulted in sometimes
multiple DoH queries to the same provider running (each doing happy
eyeballs dialing to 4x IPs themselves) for each of the 4 source IPs.
Instead, take those 4 Google/Cloudflare IPs and schedule 5 things:
first the DoH query (which can use all 4 IPs), and then each of the
4 IPs as UDP later.
* clean up the dnstype.Resolver.Addr confusion; half the code was
using it as an IP string (as documented) as half was using it as
an IP:port (from some prior type we used), primarily for tests.
Instead, document it was being primarily an IP string but also
accepting an IP:port for tests, then add an accessor method on it
to get the IPPort and use that consistently everywhere.
Change-Id: Ifdd72b9e45433a5b9c029194d50db2b9f9217b53
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If all N queries failed, we waited until context timeout (in 5
seconds) to return.
This makes (*forwarder).forward fail fast when the network's
unavailable.
Change-Id: Ibbb3efea7ed34acd3f3b29b5fee00ba8c7492569
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Simplify the ability to reason about the DoH dialing code by reusing the
dnscache's dialer we already have.
Also, reduce the scope of the "ip" variable we don't want to close over.
This necessarily adds a new field to dnscache.Resolver:
SingleHostStaticResult, for when the caller already knows the IPs to be
returned.
Change-Id: I9f2aef7926f649137a5a3e63eebad6a3fffa48c0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This extracts DOH mapping of known public DNS providers in
forwarder.go into its own package, to be consumed by other repos
Signed-off-by: Jenny Zhang <jz@tailscale.com>
This defines a new magic IPv6 prefix, fd7a:115c:a1e0:b1a::/64, a
subset of our existing /48, where the final 32 bits are an IPv4
address, and the middle 32 bits are a user-chosen "site ID". (which
must currently be 0000:00xx; the top 3 bytes must be zero for now)
e.g., I can say my home LAN's "site ID" is "0000:00bb" and then
advertise its 10.2.0.0/16 IPv4 range via IPv6, like:
tailscale up --advertise-routes=fd7a:115c:a1e0:b1a::bb:10.2.0.0/112
(112 being /128 minuse the /96 v6 prefix length)
Then people in my tailnet can:
$ curl '[fd7a:115c:a1e0:b1a::bb:10.2.0.230]'
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" ....
Updates #3616, etc
RELNOTE=initial support for TS IPv6 addresses to route v4 "via" specific nodes
Change-Id: I9b49b6ad10410a24b5866b9fbc69d3cae1f600ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* net/dns, net/dns/resolver, wgengine: refactor DNS request path
Previously, method calls into the DNS manager/resolver types handled DNS
requests rather than DNS packets. This is fine for UDP as one packet
corresponds to one request or response, however will not suit an
implementation that supports DNS over TCP.
To support PRs implementing this in the future, wgengine delegates
all handling/construction of packets to the magic DNS endpoint, to
the DNS types themselves. Handling IP packets at this level enables
future support for both UDP and TCP.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Combine the code between `LocalBackend.CheckIPForwarding` and
`controlclient.ipForwardingBroken`.
Fixes#4300
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Currently if the passed in host is an IP, Lookup still attempts to
resolve it with a dns server. This makes it just return the IP directly.
Updates tailscale/corp#4475
Signed-off-by: Maisem Ali <maisem@tailscale.com>
When the context is canceled, dc.dialOne returns an error from line 345.
This causes the defer on line 312 to try to resolve the host again, which
triggers a dns lookup of "127.0.0.1" from derp.
Updates tailscale/corp#4475
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Plumb the outbound injection path to allow passing netstack
PacketBuffers down to the tun Read, where they are decref'd to enable
buffer re-use. This removes one packet alloc & copy, and reduces GC
pressure by pooling outbound injected packets.
Fixes#2741
Signed-off-by: James Tucker <james@tailscale.com>
The best flag to use on Win7 and Win8.0 is deprecated in Win8.1, so we resolve
the flag depending on OS version info.
Fixes https://github.com/tailscale/tailscale/issues/4201
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Incidentally, simplify the go generate CI workflow, by
marking the dnsfallback update non-hermetic (so CI will
skip it) rather than manually filter it out of `go list`.
Updates #4194
Signed-off-by: David Anderson <danderson@tailscale.com>
As of Go 1.18, the register ABI list includes arm64, amd64,
ppc64, and ppc64le. This is a large enough percentage of the
architectures that it's not worth explaining.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Customer reported an issue where the connections were not closing, and
would instead just stay open. This commit makes it so that we close out
the connection regardless of what error we see. I've verified locally
that it fixes the issue, we should add a test for this.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
If it's in a non-standard table, as it is on Unifi UDM Pro, apparently.
Updates #4038 (probably fixes, but don't have hardware to verify)
Change-Id: I2cb9a098d8bb07d1a97a6045b686aca31763a937
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I introduced a bug in 8fe503057d when unifying oneConnListener
implementations.
The NewOneConnListenerFrom API was easy to misuse (its Close method
closes the underlying Listener), and we did (via http.Serve, which
closes the listener after use, which meant we were close the peerapi's
listener, even though we only wanted its Addr)
Instead, combine those two constructors into one and pass in the Addr
explicitly, without delegating through to any Listener.
Change-Id: I061d7e5f842e0cada416e7b2dd62100d4f987125
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If we've already connected to a certain name's IP in the past, don't
assume the problem was DNS related. That just puts unnecessarily load
on our bootstrap DNS servers during regular restarts of Tailscale
infrastructure components.
Also, if we do do a bootstrap DNS lookup and it gives the same IP(s)
that we already tried, don't try them again.
Change-Id: I743e8991a7f957381b8e4c1508b8e9d0df1782fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No behavior changes (intended, at least).
This is in prep for future changes to this package, which would get
too complicated in the current style.
Change-Id: Ic260f8e34ae2f64f34819d4a56e38bee8d8ac5ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This TODO was both added and fixed in 506c727e3.
As I recall, I wasn't originally going to do it because it seemed
annoying, so I wrote the TODO, but then I felt bad about it and just
did it, but forgot to remove the TODO.
Change-Id: I8f3514809ad69b447c62bfeb0a703678c1aec9a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I was about to add a third copy, so unify them now instead.
Change-Id: I3b93896aa1249b1250a6b1df4829d57717f2311a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Avoid some work when D-Bus isn't running.
Change-Id: I6f89bb75fdb24c13f61be9b400610772756db1ef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If systemd-resolved is enabled but not running (or not yet running,
such as early boot) and resolv.conf is old/dangling, we weren't
detecting systemd-resolved.
This moves its ping earlier, which will trigger it to start up and
write its file.
Updates #3362 (likely fixes)
Updates #3531 (likely fixes)
Change-Id: I6392944ac59f600571c43b8f7a677df224f2beed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
tailscaled was using 100% CPU on a machine with ~1M lines, 100MB+
of /proc/net/route data.
Two problems: in likelyHomeRouterIPLinux, we didn't stop reading the
file once we found the default route (which is on the first non-header
line when present). Which meant it was finding the answer and then
parsing 100MB over 1M lines unnecessarily. Second was that if the
default route isn't present, it'd read to the end of the file looking
for it. If it's not in the first 1,000 lines, it ain't coming, or at
least isn't worth having. (it's only used for discovering a potential
UPnP/PMP/PCP server, which is very unlikely to be present in the
environment of a machine with a ton of routes)
Change-Id: I2c4a291ab7f26aedc13885d79237b8f05c2fd8e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.
This is that experiment.
Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)
Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
