The derper sends an in-protocol keepalive every 60-65s, so frequent TCP
keepalives are unnecessary. In this tuning TCP keepalives should never
occur for a DERP client connection, as they will send an L7 keepalive
often enough to always reset the TCP keepalive timer. If however a
connection does not receive an ACK promptly it will now be shutdown,
which happens sooner than it would with a normal TCP keepalive tuning.
This re-tuning reduces the frequency of network traffic from derp to
client, reducing battery cost.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
So derpers can check an external URL for whether to permit access
to a certain public key.
Updates tailscale/corp#17693
Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Add a standalone server for STUN that can be hosted independently of the
derper, and factor that back into the derper.
Fixes#8434Closes#8435Closes#10745
Signed-off-by: James Tucker <james@tailscale.com>
Unlike most prefs, the ControlURL policy needs to take effect before
login. This resolves an issue where on first start, even when the
ControlURL policy is set, it will generate a login URL to the Tailscale
SaaS server.
Updates tailscale/coral#118
Fixes#10736
Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
The recent addition of RequestID was only populated if the
HTTP Request had returned an error. This meant that the underlying
handler has no access to this request id and any logs it may have
emitted were impossible to correlate to that request id. Therefore,
this PR adds a middleware to generate request ids and pass them
through the request context. The tsweb.StdHandler automatically
populates this request id if the middleware is being used. Finally,
inner handlers can use the context to retrieve that same request id
and use it so that all logs and events can be correlated.
Updates #2549
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The derphttp client automatically reconnects upon failure.
RunWatchConnectionLoop called derphttp.Client.WatchConnectionChanges
once, but that wrapper method called the underlying
derp.Client.WatchConnectionChanges exactly once on derphttp.Client's
currently active connection. If there's a failure, we need to re-subscribe
upon all reconnections.
This removes the derphttp.Client.WatchConnectionChanges method, which
was basically impossible to use correctly, and changes it to be a
boolean field on derphttp.Client alongside MeshKey and IsProber. Then
it moves the call to the underlying derp.Client.WatchConnectionChanges
to derphttp's client connection code, so it's resubscribed on any
reconnect.
Some paranoia is then added to make sure people hold the API right,
not calling derphttp.Client.RunWatchConnectionLoop on an
already-started Client without having set the bool to true. (But still
auto-setting it to true if that's the first method that's been called
on that derphttp.Client, as is commonly the case, and prevents
existing code from breaking)
Fixestailscale/corp#9916
Supercedes tailscale/tailscale#9719
Co-authored-by: Val <valerie@tailscale.com>
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
IPProto has been being converted to and from string formats in multiple
locations with variations in behavior. TextMarshaller and JSONMarshaller
implementations are now added, along with defined accepted and preferred
formats to centralize the logic into a single cross compatible
implementation.
Updates tailscale/corp#15043Fixestailscale/corp#15141
Signed-off-by: James Tucker <james@tailscale.com>
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.
Fixes#9756
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.
Specifically, UpdateSrcAddr & UpdateDstAddr.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
These were missed when adding NodeCapMap and resulted
in tsnet binaries not being able to turn on funnel.
Fixes#9566
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes wsconn.Conns somewhat present reasonably when they are
the client of an http.Request, rather than just put a placeholder
in that field.
Updates tailscale/corp#13777
Signed-off-by: David Anderson <danderson@tailscale.com>
In order for the installer to restart the GUI correctly post-upgrade, we
need the GUI to be able to register its restart preferences.
This PR adds API support for doing so. I'm adding it to OSS so that it
is available should we need to do any such registrations on OSS binaries
in the future.
Updates https://github.com/tailscale/corp/issues/13998
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This removes the unsafe/linkname and only uses the standard library.
It's a bit slower, for now, but https://go.dev/cl/518336 should get us
back.
On darwin/arm64, without https://go.dev/cl/518336
pkg: tailscale.com/tstime/mono
│ before │ after │
│ sec/op │ sec/op vs base │
MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10)
TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10)
geomean 25.28n 27.89n +10.33%
And with it,
MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10)
TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10)
geomean 25.42n 25.52n +0.41%
Updates #8839
Updates tailscale/go#70
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The util/linuxfw/iptables.go had a bunch of code that wasn't yet used
(in prep for future work) but because of its imports, ended up
initializing code deep within gvisor that panicked on init on arm64
systems not using 4KB pages.
This deletes the unused code to delete the imports and remove the
panic. We can then cherry-pick this back to the branch and restore it
later in a different way.
A new test makes sure we don't regress in the future by depending on
the panicking package in question.
Fixes#8658
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a few helper functions in tsweb to add common security headers to handlers. Use those functions for all non-tailscaled-facing endpoints in derper.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change is introducing new netfilterRunner interface and moving iptables manipulation to a lower leveled iptables runner.
For #391
Signed-off-by: KevinLiang10 <kevinliang@tailscale.com>
This holds back gvisor, kubernetes, goreleaser, and esbuild, which all
had breaking API changes.
Updates #8043
Updates #7381
Updates #8042 (updates u-root which adds deps)
Change-Id: I889759bea057cd3963037d41f608c99eb7466a5b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
DERP doesn't support HTTP/2. If an HTTP/2 proxy was placed in front of
a DERP server requests would fail because the connection would
be initialized with HTTP/2, which the DERP client doesn't support.
Signed-off-by: Kyle Carberry <kyle@carberry.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This splits Prometheus metric handlers exposed by tsweb into two
modules:
- `varz.Handler` exposes Prometheus metrics generated by our expvar
converter;
- `promvarz.Handler` combines our expvar-converted metrics and native
Prometheus metrics.
By default, tsweb will use the promvarz handler, however users can keep
using only the expvar converter. Specifically, `tailscaled` now uses
`varz.Handler` explicitly, which avoids a dependency on the
(heavyweight) Prometheus client.
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The handler will expose built-in process and Go metrics by default,
which currently duplicate some of the expvar-proxied metrics
(`goroutines` vs `go_goroutines`, `memstats` vs `go_memstats`), but as
long as their names are different, Prometheus server will just scrape
both.
This will change /debug/varz behaviour for most tsweb binaries, but
notably not for control, which configures a `tsweb.VarzHandler`
[explicitly](a5b5d5167f/cmd/tailcontrol/tailcontrol.go (L779))
Updates https://github.com/tailscale/corp/issues/10205
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Make developing derp easier by:
1. Creating an envknob telling clients to use HTTP to connect to derp
servers, so devs don't have to acquire a valid TLS cert.
2. Creating an envknob telling clients which derp server to connect
to, so devs don't have to edit the ACLs in the admin console to add a
custom DERP map.
3. Explaining how the -dev and -a command lines args to derper
interact.
To use this:
1. Run derper with -dev.
2. Run tailscaled with TS_DEBUG_USE_DERP_HTTP=1 and
TS_DEBUG_USE_DERP_ADDR=localhost
This will result in the client connecting to derp via HTTP on port
3340.
Fixes#7700
Signed-off-by: Val <valerie@tailscale.com>
When running a SOCKS or HTTP proxy, configure the tshttpproxy package to
drop those addresses from any HTTP_PROXY or HTTPS_PROXY environment
variables.
Fixes#7407
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6cd7cad7a609c639780484bad521c7514841764b
* wgengine/magicsock: add envknob to send CallMeMaybe to non-existent peer
For testing older client version responses to the PeerGone packet format change.
Updates #4326
Signed-off-by: Val <valerie@tailscale.com>
* derp: remove dead sclient struct member replaceLimiter
Leftover from an previous solution to the duplicate client problem.
Updates #2751
Signed-off-by: Val <valerie@tailscale.com>
* derp, derp/derphttp, wgengine/magicsock: add new PeerGone message type Not Here
Extend the PeerGone message type by adding a reason byte. Send a
PeerGone "Not Here" message when an endpoint sends a disco message to
a peer that this server has no record of.
Fixes#4326
Signed-off-by: Val <valerie@tailscale.com>
---------
Signed-off-by: Val <valerie@tailscale.com>
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
