In hopes it'll be found more.
Updates tailscale/corp#20844
Change-Id: Ic92ee9908f45b88f8770de285f838333f9467465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A few other minor language updates.
Updates tailscale/corp#20844
Change-Id: Idba85941baa0e2714688cc8a4ec3e242e7d1a362
Signed-off-by: James Tucker <james@tailscale.com>
PeerPresentFlags was added in 5ffb2668ef but wasn't plumbed through to
the RunConnectionLoop. Rather than add yet another parameter (as
IP:port was added earlier), pass in the raw PeerPresentMessage and
PeerGoneMessage struct values, which are the same things, plus two
fields: PeerGoneReasonType for gone and the PeerPresentFlags from
5ffb2668ef.
Updates tailscale/corp#17816
Change-Id: Ib19d9f95353651ada90656071fc3656cf58b7987
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is implemented via GetBestInterfaceEx. Should we encounter errors
or fail to resolve a valid, non-Tailscale interface, we fall back to
returning the index for the default interface instead.
Fixes#12551
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NewContainsIPFunc was previously documented as performing poorly if
there were many netip.Prefixes to search over. As such, we never it used it
in such cases.
This updates it to use bart at a certain threshold (over 6 prefixes,
currently), at which point the bart lookup overhead pays off.
This is currently kinda useless because we're not using it. But now we
can and get wins elsewhere. And we can remove the caveat in the docs.
goos: darwin
goarch: arm64
pkg: tailscale.com/net/tsaddr
│ before │ after │
│ sec/op │ sec/op vs base │
NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10)
NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10)
NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10)
NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10)
NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10)
NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10)
geomean 19.60n 19.07n -2.71%
Updates #12486
Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
S4U logons do not automatically load the associated user profile. In this
PR we add UserProfile to handle that part. Windows docs indicate that
we should try to resolve a remote profile path when present, so we attempt
to do so when the local computer is joined to a domain.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
AllocateContiguousBuffer is for allocating structs with trailing buffers
containing additional data. It is to be used for various Windows structures
containing pointers to data located immediately after the struct.
SetNTString performs in-place setting of windows.NTString and
windows.NTUnicodeString.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
The netcheck client, when no UDP is available, probes distance using
HTTPS.
Several problems:
* It probes using /derp/latency-check.
* But cmd/derper serves the handler at /derp/probe
* Despite the difference, it work by accident until c8f4dfc8c0
which made netcheck's probe require a 2xx status code.
* in tests, we only use derphttp.Handler, so the cmd/derper-installed
mux routes aren't preesnt, so there's no probe. That breaks
tests in airplane mode. netcheck.Client then reports "unexpected
HTTP status 426" (Upgrade Required)
This makes derp handle both /derp/probe and /derp/latency-check
equivalently, and in both cmd/derper and derphttp.Handler standalone
modes.
I notice this when wgengine/magicsock TestActiveDiscovery was failing
in airplane mode (no wifi). It still doesn't pass, but it gets
further.
Fixes#11989
Change-Id: I45213d4bd137e0f29aac8bd4a9ac92091065113f
Not buying wifi on a short flight is a good way to find tests
that require network. Whoops.
Updates #cleanup
Change-Id: Ibe678e9c755d27269ad7206413ffe9971f07d298
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some editions of Windows server share the same build number as their
client counterpart; we must use an additional field found in the OS
version information to distinguish between them.
Even though "Distro" has Linux connotations, it is the most appropriate
hostinfo field. What is Windows Server if not an alternate distribution
of Windows? This PR populates Distro with "Server" when applicable.
Fixes#11785
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Request ID generation appears prominently in some services cumulative
allocation rate, and while this does not eradicate this issue (the API
still makes UUID objects), it does improve the overhead of this API and
reduce the amount of garbage that it produces.
Updates tailscale/corp#18266
Updates tailscale/corp#19054
Signed-off-by: James Tucker <james@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
So we can use it in trunkd to quiet down the logs there.
Updates #5563
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie3177dc33f5ad103db832aab5a3e0e4f128f973f
This allows the Mac application to regain access to restricted
folders after restarts.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
I missed a case in the earlier patch, and so we're still sending 15s TCP
keepalive for TLS connections, now adjusted there too.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
The derper sends an in-protocol keepalive every 60-65s, so frequent TCP
keepalives are unnecessary. In this tuning TCP keepalives should never
occur for a DERP client connection, as they will send an L7 keepalive
often enough to always reset the TCP keepalive timer. If however a
connection does not receive an ACK promptly it will now be shutdown,
which happens sooner than it would with a normal TCP keepalive tuning.
This re-tuning reduces the frequency of network traffic from derp to
client, reducing battery cost.
Updates tailscale/corp#17587
Updates #3363
Signed-off-by: James Tucker <james@tailscale.com>
So derpers can check an external URL for whether to permit access
to a certain public key.
Updates tailscale/corp#17693
Change-Id: I8594de58f54a08be3e2dbef8bcd1ff9b728ab297
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Plan9 CI is disabled. 3p dependencies do not build for the target.
Contributor enthusiasm appears to have ceased again, and no usage has
been made.
Skipped gvisor, nfpm, and k8s.
Updates #5794
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
Also perform minor cleanups on the ctxkey package itself.
Provide guidance on when to use ctxkey.Key[T] over ctxkey.New.
Also, allow for interface kinds because the value wrapping trick
also happens to fix edge cases with interfaces in Go.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Add a standalone server for STUN that can be hosted independently of the
derper, and factor that back into the derper.
Fixes#8434Closes#8435Closes#10745
Signed-off-by: James Tucker <james@tailscale.com>
Unlike most prefs, the ControlURL policy needs to take effect before
login. This resolves an issue where on first start, even when the
ControlURL policy is set, it will generate a login URL to the Tailscale
SaaS server.
Updates tailscale/coral#118
Fixes#10736
Change-Id: I6da2a521f64028c15dbb6ac8175839fc3cc4e858
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
The cmpx.Compare function (and associated interface) are now available
in the standard library as cmp.Compare. Remove our version of it and use
the version from the standard library.
Updates #cleanup
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4be3ac63d466c05eb7a0babb25cb0d41816fbd53
The recent addition of RequestID was only populated if the
HTTP Request had returned an error. This meant that the underlying
handler has no access to this request id and any logs it may have
emitted were impossible to correlate to that request id. Therefore,
this PR adds a middleware to generate request ids and pass them
through the request context. The tsweb.StdHandler automatically
populates this request id if the middleware is being used. Finally,
inner handlers can use the context to retrieve that same request id
and use it so that all logs and events can be correlated.
Updates #2549
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
The derphttp client automatically reconnects upon failure.
RunWatchConnectionLoop called derphttp.Client.WatchConnectionChanges
once, but that wrapper method called the underlying
derp.Client.WatchConnectionChanges exactly once on derphttp.Client's
currently active connection. If there's a failure, we need to re-subscribe
upon all reconnections.
This removes the derphttp.Client.WatchConnectionChanges method, which
was basically impossible to use correctly, and changes it to be a
boolean field on derphttp.Client alongside MeshKey and IsProber. Then
it moves the call to the underlying derp.Client.WatchConnectionChanges
to derphttp's client connection code, so it's resubscribed on any
reconnect.
Some paranoia is then added to make sure people hold the API right,
not calling derphttp.Client.RunWatchConnectionLoop on an
already-started Client without having set the bool to true. (But still
auto-setting it to true if that's the first method that's been called
on that derphttp.Client, as is commonly the case, and prevents
existing code from breaking)
Fixestailscale/corp#9916
Supercedes tailscale/tailscale#9719
Co-authored-by: Val <valerie@tailscale.com>
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
On Windows, the idiomatic way to check access on a named pipe is for
the server to impersonate the client on its current OS thread, perform
access checks using the client's access token, and then revert the OS
thread's access token back to its true self.
The access token is a better representation of the client's rights than just
a username/userid check, as it represents the client's effective rights
at connection time, which might differ from their normal rights.
This patch updates safesocket to do the aforementioned impersonation,
extract the token handle, and then revert the impersonation. We retain
the token handle for the remaining duration of the connection (the token
continues to be valid even after we have reverted back to self).
Since the token is a property of the connection, I changed ipnauth to wrap
the concrete net.Conn to include the token. I then plumbed that change
through ipnlocal, ipnserver, and localapi as necessary.
I also added a PermitLocalAdmin flag to the localapi Handler which I intend
to use for controlling access to a few new localapi endpoints intended
for configuring auto-update.
Updates https://github.com/tailscale/tailscale/issues/755
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
IPProto has been being converted to and from string formats in multiple
locations with variations in behavior. TextMarshaller and JSONMarshaller
implementations are now added, along with defined accepted and preferred
formats to centralize the logic into a single cross compatible
implementation.
Updates tailscale/corp#15043Fixestailscale/corp#15141
Signed-off-by: James Tucker <james@tailscale.com>
The current structure meant that we were embedding netstack in
the tailscale CLI and in the GUIs. This removes that by isolating
the checksum munging to a different pkg which is only called from
`net/tstun`.
Fixes#9756
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Implements the ability for the address-rewriting code to support rewriting IPv6 addresses.
Specifically, UpdateSrcAddr & UpdateDstAddr.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates https://github.com/tailscale/corp/issues/11202
go-billy is held back at v5.4.1 in order to avoid a newly introduced
subdependency that is not compatible with plan9.
Updates #8043
Signed-off-by: James Tucker <james@tailscale.com>
These were missed when adding NodeCapMap and resulted
in tsnet binaries not being able to turn on funnel.
Fixes#9566
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
