* cmd/tsidp: add funnel support
Updates #10263.
Signed-off-by: Naman Sood <mail@nsood.in>
* look past funnel-ingress-node to see who we're authenticating
Signed-off-by: Naman Sood <mail@nsood.in>
* fix comment typo
Signed-off-by: Naman Sood <mail@nsood.in>
* address review feedback, support Basic auth for /token
Turns out you need to support Basic auth if you do client ID/secret
according to OAuth.
Signed-off-by: Naman Sood <mail@nsood.in>
* fix typos
Signed-off-by: Naman Sood <mail@nsood.in>
* review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* remove debugging log
Signed-off-by: Naman Sood <mail@nsood.in>
* add comments, fix header
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Fixestailscale/tailscale#12973
Updates tailscale/tailscale#1634
There was a logic issue in the captive detection code we shipped in https://github.com/tailscale/tailscale/pull/12707.
Assume a captive portal has been detected, and the user notified. Upon switching to another Wi-Fi that does *not* have a captive portal, we were issuing a signal to interrupt any pending captive detection attempt. However, we were not also setting the `captive-portal-detected` warnable to healthy. The result was that any "captive portal detected" alert would not be cleared from the UI.
Also fixes a broken log statement value.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
wgengine/magicsock,ipn: allow setting static node endpoints via tailscaled config file.
Adds a new StaticEndpoints field to tailscaled config
that can be used to statically configure the endpoints
that the node advertizes. This field will replace
TS_DEBUG_PRETENDPOINTS env var that can be used to achieve the same.
Additionally adds some functionality that ensures that endpoints
are updated when configfile is reloaded.
Also, refactor configuring/reconfiguring components to use the
same functionality when configfile is parsed the first time or
subsequent times (after reload). Previously a configfile reload
did not result in resetting of prefs. Now it does- but does not yet
tell the relevant components to consume the new prefs. This is to
be done in a follow-up.
Updates tailscale/tailscale#12578
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#20971
We added some Warnables for DERP failure situations, but their Text currently spits out the DERP region ID ("10") in the UI, which is super ugly. It would be better to provide the RegionName of the DERP region that is failing. We can do so by storing a reference to the last-known DERP map in the health package whenever we fetch one, and using it when generating the notification text.
This way, the following message...
> Tailscale could not connect to the relay server '10'. The server might be temporarily unavailable, or your Internet connection might be down.
becomes:
> Tailscale could not connect to the 'Seattle' relay server. The server might be temporarily unavailable, or your Internet connection might be down.
which is a lot more user-friendly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Updates tailscale/tailscale#4136
This PR is the first round of work to move from encoding health warnings as strings and use structured data instead. The current health package revolves around the idea of Subsystems. Each subsystem can have (or not have) a Go error associated with it. The overall health of the backend is given by the concatenation of all these errors.
This PR polishes the concept of Warnable introduced by @bradfitz a few weeks ago. Each Warnable is a component of the backend (for instance, things like 'dns' or 'magicsock' are Warnables). Each Warnable has a unique identifying code. A Warnable is an entity we can warn the user about, by setting (or unsetting) a WarningState for it. Warnables have:
- an identifying Code, so that the GUI can track them as their WarningStates come and go
- a Title, which the GUIs can use to tell the user what component of the backend is broken
- a Text, which is a function that is called with a set of Args to generate a more detailed error message to explain the unhappy state
Additionally, this PR also begins to send Warnables and their WarningStates through LocalAPI to the clients, using ipn.Notify messages. An ipn.Notify is only issued when a warning is added or removed from the Tracker.
In a next PR, we'll get rid of subsystems entirely, and we'll start using structured warnings for all errors affecting the backend functionality.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var
that can be set for tailscale/tailscale container running as
a subnet router or exit node to enable UDP GRO forwarding
for improved performance.
See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes
This is currently considered an experimental approach;
the configuration support is partially to allow further experimentation
with containerized environments to evaluate the performance
improvements.
Updates tailscale/tailscale#12295
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The last suggested exit node needs to be incorporated in the decision
making process when a new suggestion is requested, but currently it is
not quite right: it'll be used if the suggestion code has an error or a
netmap is unavailable, but it won't be used otherwise.
Instead, this makes the last suggestion into a tiebreaker when making a
random selection between equally-good options. If the last suggestion
does not make it to the final selection pool, then a different
suggestion will be made.
Since LocalBackend.SuggestExitNode is back to being a thin shim that
sets up the parameters to suggestExitNode, it no longer needs a test.
Its test was unable to be comprehensive anyway as the code being tested
contains an uncontrolled random number generator.
Updates tailscale/corp#19681
Change-Id: I94ecc9a0d1b622de3df4ef90523f1d3e67b4bfba
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We assume most containers are immutable and don't expect tailscale
running in them to auto-update. But there's no reason to prohibit it
outright.
Ignore the tailnet-wide default auto-update setting in containers, but
allow local users to turn on auto-updates via the CLI.
RELNOTE=Auto-updates are allowed in containers, but ignore the tailnet-wide default.
Fixes#12292
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than building a new suggested exit node set every time, compute
it once on first use. Currently, syspolicy ensures that values do not
change without a restart anyway.
Since the set is being constructed in a separate func now, the test code
that manipulates syspolicy can live there, and the TestSuggestExitNode
can now run in parallel with other tests because it does not have global
dependencies.
Updates tailscale/corp#19681
Change-Id: Ic4bb40ccc91b671f9e542bd5ba9c96f942081515
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Clean up the updater goroutine on shutdown, in addition to doing that on
backend state change. This fixes a goroutine leak on shutdown in tests.
Updates #cleanup
When the client is disconnected from control for any reason (typically
just turned off), we should still attempt to update if auto-updates are
enabled. This may help users who turn tailscale on infrequently for
accessing resources.
RELNOTE: Apply auto-updates even if the node is down or disconnected
from the coordination server.
Updates #12117
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In order to test the sticky last suggestion code, a test was written for
LocalBackend.SuggestExitNode but it contains a random number generator
which makes writing comprehensive tests very difficult. This doesn't
change how the last suggestion works, but it adds some infrastructure to
make that easier in a later PR.
This adds func parameters for the two randomized parts: breaking ties
between DERP regions and breaking ties between nodes. This way tests can
validate the entire list of tied options, rather than expecting a
particular outcome given a particular random seed.
As a result of this, the global random number generator can be used
rather than seeding a local one each time.
In order to see the tied nodes for the location based (i.e. Mullvad)
case, pickWeighted needed to return a slice instead of a single
arbitrary option, so there is a small change in how that works.
Updates tailscale/corp#19681
Change-Id: I83c48a752abdec0f59c58ccfd8bfb3f3f17d0ea8
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The previous LocalBackend & CLI 'up' changes improved some stuff, but
might've been too aggressive in some edge cases.
This simplifies the authURL vs authURLSticky distinction and removes
the interact field, which seemed to just just be about duplicate URL
suppression in IPN bus, back from when the IPN bus was a single client
at a time. This moves that suppression to a different spot.
Fixes#12119
Updates #12028
Updates #12042
Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to Lock, Unlock, Lock, Unlock quite a few
times in Start resulting in all sorts of weird race
conditions. Simplify it all and only Lock/Unlock once.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes one of the Lock,Unlock,Lock,Unlock at least in
the Start function. Still has 3 more of these.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This plumbs a packet filter for jailed nodes through to the
tstun.Wrapper; the filter for a jailed node is equivalent to a "shields
up" filter. Currently a no-op as there is no way for control to
tell the client whether a peer is jailed.
Updates tailscale/corp#19623
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad
I noticed this while working on the following fix to #11962.
Updates #11962
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I4c5894d8899d1ae8c42f54ecfd4d05a4a7ac598c
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Setting the field after-the-fact wasn't working because we could migrate
prefs on creation, which would set health status for auto updates.
Updates #11986
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I41d79ebd61d64829a3a9e70586ce56f62d24ccfd
