I've run into a couple issues where the tests time out while a VM image
is being downloaded, making the cache poisoned for the next run. This
moves the hash checking into its own function and calls it much sooner
in the testing chain. If the hash check fails, the OS is redownloaded.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Most of the time qemu will output nothing when it is running. This is
expected behavior. However when qemu is unable to start due to some
problem, it prints that to either stdout or stderr. Previously this
output wasn't being captured. This patch captures that output to aid in
debugging qemu issues.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
We were crashing on in initPeerAPIListener when called from
authReconfig when b.netMap is nil. But authReconfig already returns
before the call to initPeerAPIListener when b.netMap is nil, but it
releases the b.mu mutex before calling initPeerAPIListener which
reacquires it and assumes it's still nil.
The only thing that can be setting it to nil is setNetMapLocked, which
is called by ResetForClientDisconnect, Logout/logout, or Start, all of
which can happen during an authReconfig.
So be more defensive.
Fixes#1996
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to use "redo" for that, but it was pretty vague.
Also, fix the build tags broken in interfaces_default_route_test.go from
a9745a0b68, moving those Linux-specific
tests to interfaces_linux_test.go.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously this built the binaries for every distro. This is a bit
overkill given we are using static binaries. This patch makes us only
build once.
There was also a weird issue with how processes were being managed.
Previously we just killed qemu with Process.Kill(), however that was
leaving behind zombies. This has been mended to not only kill qemu but
also waitpid() the process so it doesn't become a zombie.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The OpenSUSE 15.1 image we are using (and conseqentially the only one
that is really available easily given it is EOL) has cloud-init
hardcoded to use the OpenStack metadata thingy. Other OpenSUSE Leap
images function fine with the NoCloud backend, but this one seems to
just not work with it. No bother, we can just pretend to be OpenStack.
Thanks to Okami for giving me an example OpenStack configuration seed
image.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Arch is a bit of a weirder distro, however as a side effect it is much
more of a systemd purist experience. Adding it to our test suite will
make sure that we are working in the systemd happy path.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This distro is about to be released. OpenSUSE has historically had the
least coverage for functional testing, so this may prove useful in the
future.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
DNS names consist of labels, but outside of length limits, DNS
itself permits any content within the labels. Some records require
labels to conform to hostname limitations (which is what we implemented
before), but not all.
Fixes#2024.
Signed-off-by: David Anderson <danderson@tailscale.com>
Instead of testing all the VMs at once when they are all ready, this
patch changes the testing logic so that the vms are tested as soon as
they register with testcontrol. Also limit the amount of VM ram used at
once with the `-ram-limit` flag. That uses a semaphore to guard resource
use.
Also document CentOS' sins.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The resulting empty Prefs had AllowSingleHosts=false and
Routeall=false, so that on iOS if you did these steps:
- Login and leave running
- Terminate the frontend
- Restart the frontend (fast path restart, missing prefs)
- Set WantRunning=false
- Set WantRunning=true
...then you would have Tailscale running, but with no routes. You would
also accidentally disable the ExitNodeID/IP prefs (symptom: the current
exit node setting didn't appear in the UI), but since nothing
else worked either, you probably didn't notice.
The fix was easy enough. It turns out we already knew about the
problem, so this also fixes one of the BUG entries in state_test.
Fixes: #1918 (BUG-1) and some as-yet-unreported bugs with exit nodes.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Previously, there was no server round trip required to log out, so when
you asked ipnlocal to Logout(), it could clear the netmap immediately
and switch to NeedsLogin state.
In v1.8, we added a true Logout operation. ipn.Logout() would trigger
an async cc.StartLogout() and *also* immediately switch to NeedsLogin.
Unfortunately, some frontends would see NeedsLogin and immediately
trigger a new StartInteractiveLogin() operation, before the
controlclient auth state machine actually acted on the Logout command,
thus accidentally invalidating the entire logout operation, retaining
the netmap, and violating the user's expectations.
Instead, add a new LogoutFinished signal from controlclient
(paralleling LoginFinished) and, upon starting a logout, don't update
the ipn state machine until it's received.
Updates: #1918 (BUG-2)
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
If you set `-distro-regex` to match a subset of distros, only those
distros will be tested. Ex:
$ go test -run-vm-tests -distro-regex='opensuse'
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Don't try to do heuristics on the name. Use the net/interfaces package
which we already have to do this sort of stuff.
Fixes#2011
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Instead of pulling packages from pkgs.tailscale.com, we should use the
tailscale binaries that are local to this git commit. This exposes a bit
of the integration testing stack in order to copy the binaries
correctly.
This commit also bumps our version of github.com/pkg/sftp to the latest
commit.
If you run into trouble with yaml, be sure to check out the
commented-out alpine linux image complete with instructions on how to
use it.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
netaddr allocated at the time this was written. No longer.
name old time/op new time/op delta
TailscaleServiceAddr-4 5.46ns ± 4% 1.83ns ± 3% -66.52% (p=0.008 n=5+5)
A bunch of the others can probably be simplified too, but this
was the only one with just an IP and not an IPPrefix.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously we spewed a lot of output to stdout and stderr, even when
`-v` wasn't set. This is sub-optimal for various reasons. This patch
shunts that output to test logs so it only shows up when `-v` is set.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The cyolosecurity fork of certstore did not update its module name and
thus can only be used with a replace directive. This interferes with
installing using `go install` so I created a tailscale fork with an
updated module name.
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Instead of relying on a libvirtd bridge address that you probably won't
have on your system.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
On clean installs we didn't set use iptables, but during upgrades it
looks like we could use old prefs that directed us to go into the iptables
paths that might fail on Synology.
Updates #1995Fixestailscale/tailscale-synology#57 (I think)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This will spin up a few vms and then try and make them connect to a
testcontrol server.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
When tailscaled starts up, these lines run:
func run() error {
// ...
pol := logpolicy.New("tailnode.log.tailscale.io")
pol.SetVerbosityLevel(args.verbose)
// ...
}
If there are old log entries present, they immediate start getting uploaded. This races with the call to pol.SetVerbosityLevel.
This manifested itself as a test failure in tailscale.com/tstest/integration
when run with -race:
WARNING: DATA RACE
Read at 0x00c0001bc970 by goroutine 24:
tailscale.com/logtail.(*Logger).Write()
/Users/josh/t/corp/oss/logtail/logtail.go:517 +0x27c
log.(*Logger).Output()
/Users/josh/go/ts/src/log/log.go:184 +0x2b8
log.Printf()
/Users/josh/go/ts/src/log/log.go:323 +0x94
tailscale.com/logpolicy.newLogtailTransport.func1()
/Users/josh/t/corp/oss/logpolicy/logpolicy.go:509 +0x36c
net/http.(*Transport).dial()
/Users/josh/go/ts/src/net/http/transport.go:1168 +0x238
net/http.(*Transport).dialConn()
/Users/josh/go/ts/src/net/http/transport.go:1606 +0x21d0
net/http.(*Transport).dialConnFor()
/Users/josh/go/ts/src/net/http/transport.go:1448 +0xe4
Previous write at 0x00c0001bc970 by main goroutine:
tailscale.com/logtail.(*Logger).SetVerbosityLevel()
/Users/josh/t/corp/oss/logtail/logtail.go:131 +0x98
tailscale.com/logpolicy.(*Policy).SetVerbosityLevel()
/Users/josh/t/corp/oss/logpolicy/logpolicy.go:463 +0x60
main.run()
/Users/josh/t/corp/oss/cmd/tailscaled/tailscaled.go:178 +0x50
main.main()
/Users/josh/t/corp/oss/cmd/tailscaled/tailscaled.go:163 +0x71c
Goroutine 24 (running) created at:
net/http.(*Transport).queueForDial()
/Users/josh/go/ts/src/net/http/transport.go:1417 +0x4d8
net/http.(*Transport).getConn()
/Users/josh/go/ts/src/net/http/transport.go:1371 +0x5b8
net/http.(*Transport).roundTrip()
/Users/josh/go/ts/src/net/http/transport.go:585 +0x7f4
net/http.(*Transport).RoundTrip()
/Users/josh/go/ts/src/net/http/roundtrip.go:17 +0x30
net/http.send()
/Users/josh/go/ts/src/net/http/client.go:251 +0x4f0
net/http.(*Client).send()
/Users/josh/go/ts/src/net/http/client.go:175 +0x148
net/http.(*Client).do()
/Users/josh/go/ts/src/net/http/client.go:717 +0x1d0
net/http.(*Client).Do()
/Users/josh/go/ts/src/net/http/client.go:585 +0x358
tailscale.com/logtail.(*Logger).upload()
/Users/josh/t/corp/oss/logtail/logtail.go:367 +0x334
tailscale.com/logtail.(*Logger).uploading()
/Users/josh/t/corp/oss/logtail/logtail.go:289 +0xec
Rather than complicate the logpolicy API,
allow the verbosity to be adjusted concurrently.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
We repeat many peers each time we call SetPeers.
Instead of constructing strings for them from scratch every time,
keep strings alive across iterations.
name old time/op new time/op delta
SetPeers-8 3.58µs ± 1% 2.41µs ± 1% -32.60% (p=0.000 n=9+10)
name old alloc/op new alloc/op delta
SetPeers-8 2.53kB ± 0% 1.30kB ± 0% -48.73% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
SetPeers-8 99.0 ± 0% 16.0 ± 0% -83.84% (p=0.000 n=10+10)
We could reduce alloc/op 12% and allocs/op 23% if strs had
type map[string]strCache instead of map[string]*strCache,
but that wipes out the execution time impact.
Given that re-use is the most common scenario, let's optimize for it.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
e66d4e4c81 added AppendTo methods
to some key types. Their marshaled form is longer than 64 bytes.
name old time/op new time/op delta
Hash-8 15.5µs ± 1% 14.8µs ± 1% -4.17% (p=0.000 n=9+9)
name old alloc/op new alloc/op delta
Hash-8 1.18kB ± 0% 0.47kB ± 0% -59.87% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
Hash-8 12.0 ± 0% 6.0 ± 0% -50.00% (p=0.000 n=10+10)
This is still a bit worse than explicitly handling the types,
but much nicer.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Add MarshalText-like appending variants. Like:
https://pkg.go.dev/inet.af/netaddr#IP.AppendTo
To be used by @josharian's pending deephash optimizations.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All netaddr types that we are concerned with now implement AppendTo.
Use the AppendTo method if available, and remove all references to netaddr.
This is slower but cleaner, and more readily re-usable by others.
name old time/op new time/op delta
Hash-8 12.6µs ± 0% 14.8µs ± 1% +18.05% (p=0.000 n=8+10)
HashMapAcyclic-8 21.4µs ± 1% 21.9µs ± 1% +2.39% (p=0.000 n=10+9)
name old alloc/op new alloc/op delta
Hash-8 408B ± 0% 408B ± 0% ~ (p=1.000 n=10+10)
HashMapAcyclic-8 1.00B ± 0% 1.00B ± 0% ~ (all equal)
name old allocs/op new allocs/op delta
Hash-8 6.00 ± 0% 6.00 ± 0% ~ (all equal)
HashMapAcyclic-8 0.00 0.00 ~ (all equal)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
