// Copyright (c) 2020 Tailscale Inc & AUTHORS All rights reserved. // Use of this source code is governed by a BSD-style // license that can be found in the LICENSE file. package resolver import ( "bytes" "context" "encoding/binary" "errors" "fmt" "io" "io/ioutil" "math/rand" "net" "net/http" "runtime" "sort" "strings" "sync" "time" dns "golang.org/x/net/dns/dnsmessage" "inet.af/netaddr" "tailscale.com/net/netns" "tailscale.com/types/dnstype" "tailscale.com/types/logger" "tailscale.com/util/dnsname" "tailscale.com/wgengine/monitor" ) // headerBytes is the number of bytes in a DNS message header. const headerBytes = 12 const ( // responseTimeout is the maximal amount of time to wait for a DNS response. responseTimeout = 5 * time.Second // dohTransportTimeout is how long to keep idle HTTP // connections open to DNS-over-HTTPs servers. This is pretty // arbitrary. dohTransportTimeout = 30 * time.Second // wellKnownHostBackupDelay is how long to artificially delay upstream // DNS queries to the "fallback" DNS server IP for a known provider // (e.g. how long to wait to query Google's 8.8.4.4 after 8.8.8.8). wellKnownHostBackupDelay = 200 * time.Millisecond ) var errNoUpstreams = errors.New("upstream nameservers not set") // txid identifies a DNS transaction. // // As the standard DNS Request ID is only 16 bits, we extend it: // the lower 32 bits are the zero-extended bits of the DNS Request ID; // the upper 32 bits are the CRC32 checksum of the first question in the request. // This makes probability of txid collision negligible. type txid uint64 // getTxID computes the txid of the given DNS packet. func getTxID(packet []byte) txid { if len(packet) < headerBytes { return 0 } dnsid := binary.BigEndian.Uint16(packet[0:2]) // Previously, we hashed the question and combined it with the original txid // which was useful when concurrent queries were multiplexed on a single // local source port. We encountered some situations where the DNS server // canonicalizes the question in the response (uppercase converted to // lowercase in this case), which resulted in responses that we couldn't // match to the original request due to hash mismatches. return txid(dnsid) } func getRCode(packet []byte) dns.RCode { if len(packet) < headerBytes { // treat invalid packets as a refusal return dns.RCode(5) } // get bottom 4 bits of 3rd byte return dns.RCode(packet[3] & 0x0F) } // clampEDNSSize attempts to limit the maximum EDNS response size. This is not // an exhaustive solution, instead only easy cases are currently handled in the // interest of speed and reduced complexity. Only OPT records at the very end of // the message with no option codes are addressed. // TODO: handle more situations if we discover that they happen often func clampEDNSSize(packet []byte, maxSize uint16) { // optFixedBytes is the size of an OPT record with no option codes. const optFixedBytes = 11 const edns0Version = 0 if len(packet) < headerBytes+optFixedBytes { return } arCount := binary.BigEndian.Uint16(packet[10:12]) if arCount == 0 { // OPT shows up in an AR, so there must be no OPT return } // https://datatracker.ietf.org/doc/html/rfc6891#section-6.1.2 opt := packet[len(packet)-optFixedBytes:] if opt[0] != 0 { // OPT NAME must be 0 (root domain) return } if dns.Type(binary.BigEndian.Uint16(opt[1:3])) != dns.TypeOPT { // Not an OPT record return } requestedSize := binary.BigEndian.Uint16(opt[3:5]) // Ignore extended RCODE in opt[5] if opt[6] != edns0Version { // Be conservative and don't touch unknown versions. return } // Ignore flags in opt[6:9] if binary.BigEndian.Uint16(opt[9:11]) != 0 { // RDLEN must be 0 (no variable length data). We're at the end of the // packet so this should be 0 anyway).. return } if requestedSize <= maxSize { return } // Clamp the maximum size binary.BigEndian.PutUint16(opt[3:5], maxSize) } type route struct { Suffix dnsname.FQDN Resolvers []resolverAndDelay } // resolverAndDelay is an upstream DNS resolver and a delay for how // long to wait before querying it. type resolverAndDelay struct { // name is the upstream resolver. name dnstype.Resolver // startDelay is an amount to delay this resolver at // start. It's used when, say, there are four Google or // Cloudflare DNS IPs (two IPv4 + two IPv6) and we don't want // to race all four at once. startDelay time.Duration } // forwarder forwards DNS packets to a number of upstream nameservers. type forwarder struct { logf logger.Logf linkMon *monitor.Mon linkSel ForwardLinkSelector dohSem chan struct{} ctx context.Context // good until Close ctxCancel context.CancelFunc // closes ctx // responses is a channel by which responses are returned. responses chan packet mu sync.Mutex // guards following dohClient map[string]*http.Client // urlBase -> client // routes are per-suffix resolvers to use, with // the most specific routes first. routes []route } func init() { rand.Seed(time.Now().UnixNano()) } func newForwarder(logf logger.Logf, responses chan packet, linkMon *monitor.Mon, linkSel ForwardLinkSelector) *forwarder { maxDoHInFlight := 1000 // effectively unlimited if runtime.GOOS == "ios" { // No HTTP/2 on iOS yet (for size reasons), so DoH is // pricier. maxDoHInFlight = 10 } f := &forwarder{ logf: logger.WithPrefix(logf, "forward: "), linkMon: linkMon, linkSel: linkSel, responses: responses, dohSem: make(chan struct{}, maxDoHInFlight), } f.ctx, f.ctxCancel = context.WithCancel(context.Background()) return f } func (f *forwarder) Close() error { f.ctxCancel() return nil } // resolversWithDelays maps from a set of DNS server names to a slice of // a type that included a startDelay. So if resolvers contains e.g. four // Google DNS IPs (two IPv4 + twoIPv6), this function partition adds // delays to some. func resolversWithDelays(resolvers []dnstype.Resolver) []resolverAndDelay { type hostAndFam struct { host string // some arbitrary string representing DNS host (currently the DoH base) bits uint8 // either 32 or 128 for IPv4 vs IPv6s address family } // Track how many of each known resolver host are in the list, // per address family. total := map[hostAndFam]int{} rr := make([]resolverAndDelay, len(resolvers)) for _, r := range resolvers { if ip, err := netaddr.ParseIP(r.Addr); err == nil { if host, ok := knownDoH[ip]; ok { total[hostAndFam{host, ip.BitLen()}]++ } } } done := map[hostAndFam]int{} for i, r := range resolvers { var startDelay time.Duration if ip, err := netaddr.ParseIP(r.Addr); err == nil { if host, ok := knownDoH[ip]; ok { key4 := hostAndFam{host, 32} key6 := hostAndFam{host, 128} switch { case ip.Is4(): if done[key4] > 0 { startDelay += wellKnownHostBackupDelay } case ip.Is6(): total4 := total[key4] if total4 >= 2 { // If we have two IPv4 IPs of the same provider // already in the set, delay the IPv6 queries // until halfway through the timeout (so wait // 2.5 seconds). Even the network is IPv6-only, // the DoH dialer will fallback to IPv6 // immediately anyway. startDelay = responseTimeout / 2 } else if total4 == 1 { startDelay += wellKnownHostBackupDelay } if done[key6] > 0 { startDelay += wellKnownHostBackupDelay } } done[hostAndFam{host, ip.BitLen()}]++ } } rr[i] = resolverAndDelay{ name: r, startDelay: startDelay, } } return rr } // setRoutes sets the routes to use for DNS forwarding. It's called by // Resolver.SetConfig on reconfig. // // The memory referenced by routesBySuffix should not be modified. func (f *forwarder) setRoutes(routesBySuffix map[dnsname.FQDN][]dnstype.Resolver) { routes := make([]route, 0, len(routesBySuffix)) for suffix, rs := range routesBySuffix { routes = append(routes, route{ Suffix: suffix, Resolvers: resolversWithDelays(rs), }) } // Sort from longest prefix to shortest. sort.Slice(routes, func(i, j int) bool { return routes[i].Suffix.NumLabels() > routes[j].Suffix.NumLabels() }) f.mu.Lock() defer f.mu.Unlock() f.routes = routes } var stdNetPacketListener packetListener = new(net.ListenConfig) type packetListener interface { ListenPacket(ctx context.Context, network, address string) (net.PacketConn, error) } func (f *forwarder) packetListener(ip netaddr.IP) (packetListener, error) { if f.linkSel == nil || initListenConfig == nil { return stdNetPacketListener, nil } linkName := f.linkSel.PickLink(ip) if linkName == "" { return stdNetPacketListener, nil } lc := new(net.ListenConfig) if err := initListenConfig(lc, f.linkMon, linkName); err != nil { return nil, err } return lc, nil } func (f *forwarder) getKnownDoHClient(ip netaddr.IP) (urlBase string, c *http.Client, ok bool) { urlBase, ok = knownDoH[ip] if !ok { return } f.mu.Lock() defer f.mu.Unlock() if c, ok := f.dohClient[urlBase]; ok { return urlBase, c, true } if f.dohClient == nil { f.dohClient = map[string]*http.Client{} } nsDialer := netns.NewDialer() c = &http.Client{ Transport: &http.Transport{ IdleConnTimeout: dohTransportTimeout, DialContext: func(ctx context.Context, netw, addr string) (net.Conn, error) { if !strings.HasPrefix(netw, "tcp") { return nil, fmt.Errorf("unexpected network %q", netw) } c, err := nsDialer.DialContext(ctx, "tcp", net.JoinHostPort(ip.String(), "443")) // If v4 failed, try an equivalent v6 also in the time remaining. if err != nil && ctx.Err() == nil { if ip6, ok := dohV6(urlBase); ok && ip.Is4() { if c6, err := nsDialer.DialContext(ctx, "tcp", net.JoinHostPort(ip6.String(), "443")); err == nil { return c6, nil } } } return c, err }, }, } f.dohClient[urlBase] = c return urlBase, c, true } const dohType = "application/dns-message" func (f *forwarder) releaseDoHSem() { <-f.dohSem } func (f *forwarder) sendDoH(ctx context.Context, urlBase string, c *http.Client, packet []byte) ([]byte, error) { // Bound the number of HTTP requests in flight. This primarily // matters for iOS where we're very memory constrained and // HTTP requests are heavier on iOS where we don't include // HTTP/2 for binary size reasons (as binaries on iOS linked // with Go code cost memory proportional to the binary size, // for reasons not fully understood). select { case f.dohSem <- struct{}{}: case <-ctx.Done(): return nil, ctx.Err() } defer f.releaseDoHSem() req, err := http.NewRequestWithContext(ctx, "POST", urlBase, bytes.NewReader(packet)) if err != nil { return nil, err } req.Header.Set("Content-Type", dohType) // Note: we don't currently set the Accept header (which is // only a SHOULD in the spec) as iOS doesn't use HTTP/2 and // we'd rather save a few bytes on outgoing requests when // empirically no provider cares about the Accept header's // absence. hres, err := c.Do(req) if err != nil { return nil, err } defer hres.Body.Close() if hres.StatusCode != 200 { return nil, errors.New(hres.Status) } if ct := hres.Header.Get("Content-Type"); ct != dohType { return nil, fmt.Errorf("unexpected response Content-Type %q", ct) } return ioutil.ReadAll(hres.Body) } // send sends packet to dst. It is best effort. // // send expects the reply to have the same txid as txidOut. func (f *forwarder) send(ctx context.Context, fq *forwardQuery, rr resolverAndDelay) ([]byte, error) { if strings.HasPrefix(rr.name.Addr, "http://") { return nil, fmt.Errorf("http:// resolvers not supported yet") } if strings.HasPrefix(rr.name.Addr, "https://") { return nil, fmt.Errorf("https:// resolvers not supported yet") } if strings.HasPrefix(rr.name.Addr, "tls://") { return nil, fmt.Errorf("tls:// resolvers not supported yet") } ipp, err := netaddr.ParseIPPort(rr.name.Addr) if err != nil { return nil, err } // Upgrade known DNS IPs to DoH (DNS-over-HTTPs). // All known DoH is over port 53. if urlBase, dc, ok := f.getKnownDoHClient(ipp.IP()); ok { res, err := f.sendDoH(ctx, urlBase, dc, fq.packet) if err == nil || ctx.Err() != nil { return res, err } f.logf("DoH error from %v: %v", ipp.IP(), err) } ln, err := f.packetListener(ipp.IP()) if err != nil { return nil, err } conn, err := ln.ListenPacket(ctx, "udp", ":0") if err != nil { f.logf("ListenPacket failed: %v", err) return nil, err } defer conn.Close() fq.closeOnCtxDone.Add(conn) defer fq.closeOnCtxDone.Remove(conn) if _, err := conn.WriteTo(fq.packet, ipp.UDPAddr()); err != nil { if err := ctx.Err(); err != nil { return nil, err } return nil, err } // The 1 extra byte is to detect packet truncation. out := make([]byte, maxResponseBytes+1) n, _, err := conn.ReadFrom(out) if err != nil { if err := ctx.Err(); err != nil { return nil, err } if packetWasTruncated(err) { err = nil } else { return nil, err } } truncated := n > maxResponseBytes if truncated { n = maxResponseBytes } if n < headerBytes { f.logf("recv: packet too small (%d bytes)", n) } out = out[:n] txid := getTxID(out) if txid != fq.txid { return nil, errors.New("txid doesn't match") } rcode := getRCode(out) // don't forward transient errors back to the client when the server fails if rcode == dns.RCodeServerFailure { f.logf("recv: response code indicating server failure: %d", rcode) return nil, errors.New("response code indicates server issue") } if truncated { const dnsFlagTruncated = 0x200 flags := binary.BigEndian.Uint16(out[2:4]) flags |= dnsFlagTruncated binary.BigEndian.PutUint16(out[2:4], flags) // TODO(#2067): Remove any incomplete records? RFC 1035 section 6.2 // states that truncation should head drop so that the authority // section can be preserved if possible. However, the UDP read with // a too-small buffer has already dropped the end, so that's the // best we can do. } clampEDNSSize(out, maxResponseBytes) return out, nil } // resolvers returns the resolvers to use for domain. func (f *forwarder) resolvers(domain dnsname.FQDN) []resolverAndDelay { f.mu.Lock() routes := f.routes f.mu.Unlock() for _, route := range routes { if route.Suffix == "." || route.Suffix.Contains(domain) { return route.Resolvers } } return nil } // forwardQuery is information and state about a forwarded DNS query that's // being sent to 1 or more upstreams. // // In the case of racing against multiple equivalent upstreams // (e.g. Google or CloudFlare's 4 DNS IPs: 2 IPv4 + 2 IPv6), this type // handles racing them more intelligently than just blasting away 4 // queries at once. type forwardQuery struct { txid txid packet []byte // closeOnCtxDone lets send register values to Close if the // caller's ctx expires. This avoids send from allocating its // own waiting goroutine to interrupt the ReadFrom, as memory // is tight on iOS and we want the number of pending DNS // lookups to be bursty without too much associated // goroutine/memory cost. closeOnCtxDone *closePool // TODO(bradfitz): add race delay state: // mu sync.Mutex // ... } // forward forwards the query to all upstream nameservers and returns the first response. func (f *forwarder) forward(query packet) error { domain, err := nameFromQuery(query.bs) if err != nil { return err } // Drop DNS service discovery spam, primarily for battery life // on mobile. Things like Spotify on iOS generate this traffic, // when browsing for LAN devices. But even when filtering this // out, playing on Sonos still works. if hasRDNSBonjourPrefix(domain) { return nil } clampEDNSSize(query.bs, maxResponseBytes) resolvers := f.resolvers(domain) if len(resolvers) == 0 { return errNoUpstreams } fq := &forwardQuery{ txid: getTxID(query.bs), packet: query.bs, closeOnCtxDone: new(closePool), } defer fq.closeOnCtxDone.Close() ctx, cancel := context.WithTimeout(f.ctx, responseTimeout) defer cancel() resc := make(chan []byte, 1) var ( mu sync.Mutex firstErr error ) for i := range resolvers { go func(rr *resolverAndDelay) { if rr.startDelay > 0 { timer := time.NewTimer(rr.startDelay) select { case <-timer.C: case <-ctx.Done(): timer.Stop() return } } resb, err := f.send(ctx, fq, *rr) if err != nil { mu.Lock() defer mu.Unlock() if firstErr == nil { firstErr = err } return } select { case resc <- resb: default: } }(&resolvers[i]) } select { case v := <-resc: select { case <-ctx.Done(): return ctx.Err() case f.responses <- packet{v, query.addr}: return nil } case <-ctx.Done(): mu.Lock() defer mu.Unlock() if firstErr != nil { return firstErr } return ctx.Err() } } var initListenConfig func(_ *net.ListenConfig, _ *monitor.Mon, tunName string) error // nameFromQuery extracts the normalized query name from bs. func nameFromQuery(bs []byte) (dnsname.FQDN, error) { var parser dns.Parser hdr, err := parser.Start(bs) if err != nil { return "", err } if hdr.Response { return "", errNotQuery } q, err := parser.Question() if err != nil { return "", err } n := q.Name.Data[:q.Name.Length] return dnsname.ToFQDN(rawNameToLower(n)) } // closePool is a dynamic set of io.Closers to close as a group. // It's intended to be Closed at most once. // // The zero value is ready for use. type closePool struct { mu sync.Mutex m map[io.Closer]bool closed bool } func (p *closePool) Add(c io.Closer) { p.mu.Lock() defer p.mu.Unlock() if p.closed { c.Close() return } if p.m == nil { p.m = map[io.Closer]bool{} } p.m[c] = true } func (p *closePool) Remove(c io.Closer) { p.mu.Lock() defer p.mu.Unlock() if p.closed { return } delete(p.m, c) } func (p *closePool) Close() error { p.mu.Lock() defer p.mu.Unlock() if p.closed { return nil } p.closed = true for c := range p.m { c.Close() } return nil } var knownDoH = map[netaddr.IP]string{} // 8.8.8.8 => "https://..." var dohIPsOfBase = map[string][]netaddr.IP{} func addDoH(ipStr, base string) { ip := netaddr.MustParseIP(ipStr) knownDoH[ip] = base dohIPsOfBase[base] = append(dohIPsOfBase[base], ip) } func dohV6(base string) (ip netaddr.IP, ok bool) { for _, ip := range dohIPsOfBase[base] { if ip.Is6() { return ip, true } } return ip, false } func init() { // Cloudflare addDoH("1.1.1.1", "https://cloudflare-dns.com/dns-query") addDoH("1.0.0.1", "https://cloudflare-dns.com/dns-query") addDoH("2606:4700:4700::1111", "https://cloudflare-dns.com/dns-query") addDoH("2606:4700:4700::1001", "https://cloudflare-dns.com/dns-query") // Cloudflare -Malware addDoH("1.1.1.2", "https://security.cloudflare-dns.com/dns-query") addDoH("1.0.0.2", "https://security.cloudflare-dns.com/dns-query") addDoH("2606:4700:4700::1112", "https://security.cloudflare-dns.com/dns-query") addDoH("2606:4700:4700::1002", "https://security.cloudflare-dns.com/dns-query") // Cloudflare -Malware -Adult addDoH("1.1.1.3", "https://family.cloudflare-dns.com/dns-query") addDoH("1.0.0.3", "https://family.cloudflare-dns.com/dns-query") addDoH("2606:4700:4700::1113", "https://family.cloudflare-dns.com/dns-query") addDoH("2606:4700:4700::1003", "https://family.cloudflare-dns.com/dns-query") // Google addDoH("8.8.8.8", "https://dns.google/dns-query") addDoH("8.8.4.4", "https://dns.google/dns-query") addDoH("2001:4860:4860::8888", "https://dns.google/dns-query") addDoH("2001:4860:4860::8844", "https://dns.google/dns-query") // OpenDNS // TODO(bradfitz): OpenDNS is unique amongst this current set in that // its DoH DNS names resolve to different IPs than its normal DNS // IPs. Support that later. For now we assume that they're the same. // addDoH("208.67.222.222", "https://doh.opendns.com/dns-query") // addDoH("208.67.220.220", "https://doh.opendns.com/dns-query") // addDoH("208.67.222.123", "https://doh.familyshield.opendns.com/dns-query") // addDoH("208.67.220.123", "https://doh.familyshield.opendns.com/dns-query") // Quad9 addDoH("9.9.9.9", "https://dns.quad9.net/dns-query") addDoH("149.112.112.112", "https://dns.quad9.net/dns-query") addDoH("2620:fe::fe", "https://dns.quad9.net/dns-query") addDoH("2620:fe::fe:9", "https://dns.quad9.net/dns-query") // Quad9 -DNSSEC addDoH("9.9.9.10", "https://dns10.quad9.net/dns-query") addDoH("149.112.112.10", "https://dns10.quad9.net/dns-query") addDoH("2620:fe::10", "https://dns10.quad9.net/dns-query") addDoH("2620:fe::fe:10", "https://dns10.quad9.net/dns-query") }