/* SPDX-License-Identifier: MIT * * Copyright (C) 2019 WireGuard LLC. All Rights Reserved. */ package router import ( "errors" "fmt" "log" "net/netip" "slices" "sort" "time" ole "github.com/go-ole/go-ole" "github.com/tailscale/wireguard-go/tun" "go4.org/netipx" "golang.org/x/sys/windows" "golang.zx2c4.com/wireguard/windows/tunnel/winipcfg" "tailscale.com/health" "tailscale.com/net/interfaces" "tailscale.com/net/tsaddr" "tailscale.com/net/tstun" "tailscale.com/util/multierr" "tailscale.com/wgengine/winnet" ) // monitorDefaultRoutes subscribes to route change events and updates // the Tailscale tunnel interface's MTU to match that of the // underlying default route. // // This is an attempt at making the MTU mostly correct, but in // practice this entire piece of code ends up just using the 1280 // value passed in at device construction time. This code might make // the MTU go lower due to very low-MTU IPv4 interfaces. // // TODO: this code is insufficient to control the MTU correctly. The // correct way to do it is per-peer PMTU discovery, and synthesizing // ICMP fragmentation-needed messages within tailscaled. This code may // address a few rare corner cases, but is unlikely to significantly // help with MTU issues compared to a static 1280B implementation. func monitorDefaultRoutes(tun *tun.NativeTun) (*winipcfg.RouteChangeCallback, error) { ourLuid := winipcfg.LUID(tun.LUID()) lastMtu := uint32(0) doIt := func() error { mtu, err := getDefaultRouteMTU() if err != nil { return fmt.Errorf("error getting default route MTU: %w", err) } if mtu > 0 && (lastMtu == 0 || lastMtu != mtu) { iface, err := ourLuid.IPInterface(windows.AF_INET) if err != nil { if !errors.Is(err, windows.ERROR_NOT_FOUND) { return fmt.Errorf("getting v4 interface: %w", err) } } else { iface.NLMTU = mtu - 80 // If the TUN device was created with a smaller MTU, // though, such as 1280, we don't want to go bigger // than configured. (See the comment on minimalMTU in // the wgengine package.) if min, err := tun.MTU(); err == nil && min < int(iface.NLMTU) { iface.NLMTU = uint32(min) } if iface.NLMTU < 576 { iface.NLMTU = 576 } err = iface.Set() if err != nil { return fmt.Errorf("error setting v4 MTU: %w", err) } tun.ForceMTU(int(iface.NLMTU)) } iface, err = ourLuid.IPInterface(windows.AF_INET6) if err != nil { if !errors.Is(err, windows.ERROR_NOT_FOUND) { return fmt.Errorf("error getting v6 interface: %w", err) } } else { iface.NLMTU = mtu - 80 if iface.NLMTU < 1280 { iface.NLMTU = 1280 } err = iface.Set() if err != nil { return fmt.Errorf("error setting v6 MTU: %w", err) } } lastMtu = mtu } return nil } err := doIt() if err != nil { return nil, err } cb, err := winipcfg.RegisterRouteChangeCallback(func(notificationType winipcfg.MibNotificationType, route *winipcfg.MibIPforwardRow2) { //fmt.Printf("MonitorDefaultRoutes: changed: %v\n", route.DestinationPrefix) if route.DestinationPrefix.PrefixLength == 0 { _ = doIt() } }) if err != nil { return nil, err } return cb, nil } func getDefaultRouteMTU() (uint32, error) { mtus, err := interfaces.NonTailscaleMTUs() if err != nil { return 0, err } routes, err := winipcfg.GetIPForwardTable2(windows.AF_INET) if err != nil { return 0, err } best := ^uint32(0) mtu := uint32(0) for _, route := range routes { if route.DestinationPrefix.PrefixLength != 0 { continue } routeMTU := mtus[route.InterfaceLUID] if routeMTU == 0 { continue } if route.Metric < best { best = route.Metric mtu = routeMTU } } routes, err = winipcfg.GetIPForwardTable2(windows.AF_INET6) if err != nil { return 0, err } best = ^uint32(0) for _, route := range routes { if route.DestinationPrefix.PrefixLength != 0 { continue } routeMTU := mtus[route.InterfaceLUID] if routeMTU == 0 { continue } if route.Metric < best { best = route.Metric if routeMTU < mtu { mtu = routeMTU } } } return mtu, nil } // setPrivateNetwork marks the provided network adapter's category to private. // It returns (false, nil) if the adapter was not found. func setPrivateNetwork(ifcLUID winipcfg.LUID) (bool, error) { // NLM_NETWORK_CATEGORY values. const ( categoryPublic = 0 categoryPrivate = 1 categoryDomain = 2 ) ifcGUID, err := ifcLUID.GUID() if err != nil { return false, fmt.Errorf("ifcLUID.GUID: %v", err) } // aaron: DO NOT call Initialize() or Uninitialize() on c! // We've already handled that process-wide. var c ole.Connection m, err := winnet.NewNetworkListManager(&c) if err != nil { return false, fmt.Errorf("winnet.NewNetworkListManager: %v", err) } defer m.Release() cl, err := m.GetNetworkConnections() if err != nil { return false, fmt.Errorf("m.GetNetworkConnections: %v", err) } defer cl.Release() for _, nco := range cl { aid, err := nco.GetAdapterId() if err != nil { return false, fmt.Errorf("nco.GetAdapterId: %v", err) } if aid != ifcGUID.String() { continue } n, err := nco.GetNetwork() if err != nil { return false, fmt.Errorf("GetNetwork: %v", err) } defer n.Release() cat, err := n.GetCategory() if err != nil { return false, fmt.Errorf("GetCategory: %v", err) } if cat != categoryPrivate && cat != categoryDomain { if err := n.SetCategory(categoryPrivate); err != nil { return false, fmt.Errorf("SetCategory: %v", err) } } return true, nil } return false, nil } // interfaceFromLUID returns IPAdapterAddresses with specified LUID. func interfaceFromLUID(luid winipcfg.LUID, flags winipcfg.GAAFlags) (*winipcfg.IPAdapterAddresses, error) { addresses, err := winipcfg.GetAdaptersAddresses(windows.AF_UNSPEC, flags) if err != nil { return nil, err } for _, addr := range addresses { if addr.LUID == luid { return addr, nil } } return nil, fmt.Errorf("interfaceFromLUID: interface with LUID %v not found", luid) } var networkCategoryWarning = health.NewWarnable(health.WithMapDebugFlag("warn-network-category-unhealthy")) func configureInterface(cfg *Config, tun *tun.NativeTun) (retErr error) { var mtu = tstun.DefaultTUNMTU() luid := winipcfg.LUID(tun.LUID()) iface, err := interfaceFromLUID(luid, // Issue 474: on early boot, when the network is still // coming up, if the Tailscale service comes up first, // the Tailscale adapter it finds might not have the // IPv4 service available yet? Try this flag: winipcfg.GAAFlagIncludeAllInterfaces, ) if err != nil { return fmt.Errorf("getting interface: %w", err) } // Send non-nil return errors to retErrc, to interrupt our background // setPrivateNetwork goroutine. retErrc := make(chan error, 1) defer func() { if retErr != nil { retErrc <- retErr } }() go func() { // It takes a weirdly long time for Windows to notice the // new interface has come up. Poll periodically until it // does. const tries = 20 for i := range tries { found, err := setPrivateNetwork(luid) if err != nil { health.Global.SetWarnable(networkCategoryWarning, fmt.Errorf("set-network-category: %w", err)) log.Printf("setPrivateNetwork(try=%d): %v", i, err) } else { health.Global.SetWarnable(networkCategoryWarning, nil) if found { if i > 0 { log.Printf("setPrivateNetwork(try=%d): success", i) } return } log.Printf("setPrivateNetwork(try=%d): not found", i) } select { case <-time.After(time.Second): case <-retErrc: return } } log.Printf("setPrivateNetwork: adapter LUID %v not found after %d tries, giving up", luid, tries) }() // Figure out which of IPv4 and IPv6 are available. Both protocols // can be disabled on a per-interface basis by the user, as well // as globally via a registry policy. We skip programming anything // related to the disabled protocols, since by definition they're // unusable. ipif4, err := iface.LUID.IPInterface(windows.AF_INET) if err != nil { if !errors.Is(err, windows.ERROR_NOT_FOUND) { return fmt.Errorf("getting AF_INET interface: %w", err) } log.Printf("AF_INET interface not found on Tailscale adapter, skipping IPv4 programming") ipif4 = nil } ipif6, err := iface.LUID.IPInterface(windows.AF_INET6) if err != nil { if !errors.Is(err, windows.ERROR_NOT_FOUND) { return fmt.Errorf("getting AF_INET6 interface: %w", err) } log.Printf("AF_INET6 interface not found on Tailscale adapter, skipping IPv6 programming") ipif6 = nil } // Windows requires routes to have a nexthop. For routes such as // ours where the nexthop is meaningless, you're supposed to use // one of the local IP addresses of the interface. Find an IPv4 // and IPv6 address we can use for this purpose. var firstGateway4 netip.Addr var firstGateway6 netip.Addr addresses := make([]netip.Prefix, 0, len(cfg.LocalAddrs)) for _, addr := range cfg.LocalAddrs { if (addr.Addr().Is4() && ipif4 == nil) || (addr.Addr().Is6() && ipif6 == nil) { // Can't program addresses for disabled protocol. continue } addresses = append(addresses, addr) if addr.Addr().Is4() && !firstGateway4.IsValid() { firstGateway4 = addr.Addr() } else if addr.Addr().Is6() && !firstGateway6.IsValid() { firstGateway6 = addr.Addr() } } var routes []*routeData foundDefault4 := false foundDefault6 := false for _, route := range cfg.Routes { if (route.Addr().Is4() && ipif4 == nil) || (route.Addr().Is6() && ipif6 == nil) { // Can't program routes for disabled protocol. continue } if route.Addr().Is6() && !firstGateway6.IsValid() { // Windows won't let us set IPv6 routes without having an // IPv6 local address set. However, when we've configured // a default route, we want to forcibly grab IPv6 traffic // even if the v6 overlay network isn't configured. To do // that, we add a dummy local IPv6 address to serve as a // route source. ip := tsaddr.Tailscale4To6Placeholder() addresses = append(addresses, netip.PrefixFrom(ip, ip.BitLen())) firstGateway6 = ip } else if route.Addr().Is4() && !firstGateway4.IsValid() { // TODO: do same dummy behavior as v6? return errors.New("due to a Windows limitation, one cannot have interface routes without an interface address") } var gateway netip.Addr if route.Addr().Is4() { gateway = firstGateway4 } else if route.Addr().Is6() { gateway = firstGateway6 } r := &routeData{ RouteData: winipcfg.RouteData{ Destination: route, NextHop: gateway, Metric: 0, }, } if r.Destination.Addr().Unmap() == gateway { // no need to add a route for the interface's // own IP. The kernel does that for us. // If we try to replace it, we'll fail to // add the route unless NextHop is set, but // then the interface's IP won't be pingable. continue } if route.Addr().Is4() { if route.Bits() == 0 { foundDefault4 = true } r.NextHop = firstGateway4 } else if route.Addr().Is6() { if route.Bits() == 0 { foundDefault6 = true } r.NextHop = firstGateway6 } routes = append(routes, r) } err = syncAddresses(iface, addresses) if err != nil { return fmt.Errorf("syncAddresses: %w", err) } slices.SortFunc(routes, (*routeData).Compare) deduplicatedRoutes := []*routeData{} for i := range len(routes) { // There's only one way to get to a given IP+Mask, so delete // all matches after the first. if i > 0 && routes[i].Destination == routes[i-1].Destination { continue } deduplicatedRoutes = append(deduplicatedRoutes, routes[i]) } // Re-read interface after syncAddresses. iface, err = interfaceFromLUID(luid, // Issue 474: on early boot, when the network is still // coming up, if the Tailscale service comes up first, // the Tailscale adapter it finds might not have the // IPv4 service available yet? Try this flag: winipcfg.GAAFlagIncludeAllInterfaces, ) if err != nil { return fmt.Errorf("getting interface: %w", err) } var errAcc error err = syncRoutes(iface, deduplicatedRoutes, cfg.LocalAddrs) if err != nil && errAcc == nil { log.Printf("setroutes: %v", err) errAcc = err } if ipif4 != nil { ipif4, err = iface.LUID.IPInterface(windows.AF_INET) if err != nil { return fmt.Errorf("getting AF_INET interface: %w", err) } if foundDefault4 { ipif4.UseAutomaticMetric = false ipif4.Metric = 0 } if mtu > 0 { ipif4.NLMTU = uint32(mtu) tun.ForceMTU(int(ipif4.NLMTU)) } err = ipif4.Set() if err != nil && errAcc == nil { errAcc = err } } if ipif6 != nil { ipif6, err = iface.LUID.IPInterface(windows.AF_INET6) if err != nil { return fmt.Errorf("getting AF_INET6 interface: %w", err) } else { if foundDefault6 { ipif6.UseAutomaticMetric = false ipif6.Metric = 0 } if mtu > 0 { ipif6.NLMTU = uint32(mtu) } ipif6.DadTransmits = 0 ipif6.RouterDiscoveryBehavior = winipcfg.RouterDiscoveryDisabled err = ipif6.Set() if err != nil && errAcc == nil { errAcc = err } } } return errAcc } func netCompare(a, b netip.Prefix) int { aip, bip := a.Addr().Unmap(), b.Addr().Unmap() v := aip.Compare(bip) if v != 0 { return v } if a.Bits() == b.Bits() { return 0 } // narrower first if a.Bits() > b.Bits() { return -1 } return 1 } func sortNets(s []netip.Prefix) { sort.Slice(s, func(i, j int) bool { return netCompare(s[i], s[j]) == -1 }) } // deltaNets returns the changes to turn a into b. func deltaNets(a, b []netip.Prefix) (add, del []netip.Prefix) { add = make([]netip.Prefix, 0, len(b)) del = make([]netip.Prefix, 0, len(a)) sortNets(a) sortNets(b) i := 0 j := 0 for i < len(a) && j < len(b) { switch netCompare(a[i], b[j]) { case -1: // a < b, delete del = append(del, a[i]) i++ case 0: // a == b, no diff i++ j++ case 1: // a > b, add missing entry add = append(add, b[j]) j++ default: panic("unexpected compare result") } } del = append(del, a[i:]...) add = append(add, b[j:]...) return } func isIPv6LinkLocal(a netip.Prefix) bool { return a.Addr().Is6() && a.Addr().IsLinkLocalUnicast() } // ipAdapterUnicastAddressToPrefix converts windows.IpAdapterUnicastAddress to netip.Prefix func ipAdapterUnicastAddressToPrefix(u *windows.IpAdapterUnicastAddress) netip.Prefix { ip, _ := netip.AddrFromSlice(u.Address.IP()) return netip.PrefixFrom(ip.Unmap(), int(u.OnLinkPrefixLength)) } // unicastIPNets returns all unicast net.IPNet for ifc interface. func unicastIPNets(ifc *winipcfg.IPAdapterAddresses) []netip.Prefix { var nets []netip.Prefix for addr := ifc.FirstUnicastAddress; addr != nil; addr = addr.Next { nets = append(nets, ipAdapterUnicastAddressToPrefix(addr)) } return nets } // syncAddresses incrementally sets the interface's unicast IP addresses, // doing the minimum number of AddAddresses & DeleteAddress calls. // This avoids the full FlushAddresses. // // Any IPv6 link-local addresses are not deleted out of caution as some // configurations may repeatedly re-add them. Link-local addresses are adjusted // to set SkipAsSource. SkipAsSource prevents the addresses from being added to // DNS locally or remotely and from being picked as a source address for // outgoing packets with unspecified sources. See #4647 and // https://web.archive.org/web/20200912120956/https://devblogs.microsoft.com/scripting/use-powershell-to-change-ip-behavior-with-skipassource/ func syncAddresses(ifc *winipcfg.IPAdapterAddresses, want []netip.Prefix) error { var erracc error got := unicastIPNets(ifc) add, del := deltaNets(got, want) ll := make([]netip.Prefix, 0) for _, a := range del { // do not delete link-local addresses, and collect them for later // applying SkipAsSource. if isIPv6LinkLocal(a) { ll = append(ll, a) continue } err := ifc.LUID.DeleteIPAddress(a) if err != nil { erracc = fmt.Errorf("deleting IP %q: %w", a, err) } } for _, a := range add { err := ifc.LUID.AddIPAddress(a) if err != nil { erracc = fmt.Errorf("adding IP %q: %w", a, err) } } for _, a := range ll { mib, err := ifc.LUID.IPAddress(a.Addr()) if err != nil { erracc = fmt.Errorf("setting skip-as-source on IP %q: unable to retrieve MIB: %w", a, err) continue } if !mib.SkipAsSource { mib.SkipAsSource = true if err := mib.Set(); err != nil { erracc = fmt.Errorf("setting skip-as-source on IP %q: unable to set MIB: %w", a, err) } } } return erracc } // routeData wraps winipcfg.RouteData with an additional field that permits // caching of the associated MibIPForwardRow2; by keeping it around, we can // avoid unnecessary (and slow) lookups of information that we already have. type routeData struct { winipcfg.RouteData Row *winipcfg.MibIPforwardRow2 } func (rd *routeData) Less(other *routeData) bool { return rd.Compare(other) < 0 } func (rd *routeData) Compare(other *routeData) int { v := rd.Destination.Addr().Compare(other.Destination.Addr()) if v != 0 { return v } // Narrower masks first b1, b2 := rd.Destination.Bits(), other.Destination.Bits() if b1 != b2 { if b1 > b2 { return -1 } return 1 } // No nexthop before non-empty nexthop v = rd.NextHop.Compare(other.NextHop) if v != 0 { return v } // Lower metrics first if rd.Metric < other.Metric { return -1 } else if rd.Metric > other.Metric { return 1 } return 0 } func deltaRouteData(a, b []*routeData) (add, del []*routeData) { add = make([]*routeData, 0, len(b)) del = make([]*routeData, 0, len(a)) slices.SortFunc(a, (*routeData).Compare) slices.SortFunc(b, (*routeData).Compare) i := 0 j := 0 for i < len(a) && j < len(b) { switch a[i].Compare(b[j]) { case -1: // a < b, delete del = append(del, a[i]) i++ case 0: // a == b, no diff i++ j++ case 1: // a > b, add missing entry add = append(add, b[j]) j++ default: panic("unexpected compare result") } } del = append(del, a[i:]...) add = append(add, b[j:]...) return } // getInterfaceRoutes returns all the interface's routes. // Corresponds to GetIpForwardTable2 function, but filtered by interface. func getInterfaceRoutes(ifc *winipcfg.IPAdapterAddresses, family winipcfg.AddressFamily) (matches []*winipcfg.MibIPforwardRow2, err error) { routes, err := winipcfg.GetIPForwardTable2(family) if err != nil { return nil, err } for i := range routes { if routes[i].InterfaceLUID == ifc.LUID { matches = append(matches, &routes[i]) } } return } func getAllInterfaceRoutes(ifc *winipcfg.IPAdapterAddresses) ([]*routeData, error) { routes4, err := getInterfaceRoutes(ifc, windows.AF_INET) if err != nil { return nil, err } routes6, err := getInterfaceRoutes(ifc, windows.AF_INET6) if err != nil { // TODO: what if v6 unavailable? return nil, err } rd := make([]*routeData, 0, len(routes4)+len(routes6)) for _, r := range routes4 { rd = append(rd, &routeData{ RouteData: winipcfg.RouteData{ Destination: r.DestinationPrefix.Prefix(), NextHop: r.NextHop.Addr(), Metric: r.Metric, }, Row: r, }) } for _, r := range routes6 { rd = append(rd, &routeData{ RouteData: winipcfg.RouteData{ Destination: r.DestinationPrefix.Prefix(), NextHop: r.NextHop.Addr(), Metric: r.Metric, }, Row: r, }) } return rd, nil } // filterRoutes removes routes that have been added by Windows and should not // be managed by us. func filterRoutes(routes []*routeData, dontDelete []netip.Prefix) []*routeData { ddm := make(map[netip.Prefix]bool) for _, dd := range dontDelete { // See issue 1448: we don't want to touch the routes added // by Windows for our interface addresses. ddm[dd] = true } for _, r := range routes { // We don't want to touch broadcast routes that Windows adds. nr := r.Destination if !nr.IsValid() { continue } if nr.IsSingleIP() { continue } lastIP := netipx.RangeOfPrefix(nr).To() ddm[netip.PrefixFrom(lastIP, lastIP.BitLen())] = true } filtered := make([]*routeData, 0, len(routes)) for _, r := range routes { rr := r.Destination if rr.IsValid() && ddm[rr] { continue } filtered = append(filtered, r) } return filtered } // syncRoutes incrementally sets multiples routes on an interface. // This avoids a full ifc.FlushRoutes call. // dontDelete is a list of interface address routes that the // synchronization logic should never delete. func syncRoutes(ifc *winipcfg.IPAdapterAddresses, want []*routeData, dontDelete []netip.Prefix) error { existingRoutes, err := getAllInterfaceRoutes(ifc) if err != nil { return err } got := filterRoutes(existingRoutes, dontDelete) add, del := deltaRouteData(got, want) var errs []error for _, a := range del { var err error if a.Row == nil { // DeleteRoute requires a routing table lookup, so only do that if // a does not already have the row. err = ifc.LUID.DeleteRoute(a.Destination, a.NextHop) } else { // Otherwise, delete the row directly. err = a.Row.Delete() } if err != nil { dstStr := a.Destination.String() if dstStr == "169.254.255.255/32" { // Issue 785. Ignore these routes // failing to delete. Harmless. // TODO(maisem): do we still need this? continue } errs = append(errs, fmt.Errorf("deleting route %v: %w", dstStr, err)) } } for _, a := range add { err := ifc.LUID.AddRoute(a.Destination, a.NextHop, a.Metric) if err != nil { errs = append(errs, fmt.Errorf("adding route %v: %w", &a.Destination, err)) } } return multierr.New(errs...) }