tailscale/net/tstun/wrap.go
Maisem Ali bb31fd7d1c net/tstun: add inital support for NAT v4
This adds support in tstun to utitilize the SelfNodeV4MasqAddrForThisPeer and
perform the necessary modifications to the packet as it passes through tstun.

Currently this only handles ICMP, UDP and TCP traffic.
Subnet routers and Exit Nodes are also unsupported.

Updates tailscale/corp#8020

Co-authored-by: Melanie Warrick <warrick@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
2023-03-23 16:54:12 -07:00

1090 lines
32 KiB
Go

// Copyright (c) Tailscale Inc & AUTHORS
// SPDX-License-Identifier: BSD-3-Clause
// Package tstun provides a TUN struct implementing the tun.Device interface
// with additional features as required by wgengine.
package tstun
import (
"errors"
"fmt"
"io"
"net/netip"
"os"
"strings"
"sync"
"sync/atomic"
"time"
"github.com/tailscale/wireguard-go/device"
"github.com/tailscale/wireguard-go/tun"
"go4.org/mem"
"gvisor.dev/gvisor/pkg/tcpip/stack"
"tailscale.com/disco"
"tailscale.com/net/connstats"
"tailscale.com/net/packet"
"tailscale.com/net/tsaddr"
"tailscale.com/syncs"
"tailscale.com/tstime/mono"
"tailscale.com/types/ipproto"
"tailscale.com/types/key"
"tailscale.com/types/logger"
"tailscale.com/types/netmap"
"tailscale.com/types/views"
"tailscale.com/util/clientmetric"
"tailscale.com/util/mak"
"tailscale.com/wgengine/capture"
"tailscale.com/wgengine/filter"
)
const maxBufferSize = device.MaxMessageSize
// PacketStartOffset is the minimal amount of leading space that must exist
// before &packet[offset] in a packet passed to Read, Write, or InjectInboundDirect.
// This is necessary to avoid reallocation in wireguard-go internals.
const PacketStartOffset = device.MessageTransportHeaderSize
// MaxPacketSize is the maximum size (in bytes)
// of a packet that can be injected into a tstun.Wrapper.
const MaxPacketSize = device.MaxContentSize
const tapDebug = false // for super verbose TAP debugging
var (
// ErrClosed is returned when attempting an operation on a closed Wrapper.
ErrClosed = errors.New("device closed")
// ErrFiltered is returned when the acted-on packet is rejected by a filter.
ErrFiltered = errors.New("packet dropped by filter")
)
var (
errPacketTooBig = errors.New("packet too big")
errOffsetTooBig = errors.New("offset larger than buffer length")
errOffsetTooSmall = errors.New("offset smaller than PacketStartOffset")
)
// parsedPacketPool holds a pool of Parsed structs for use in filtering.
// This is needed because escape analysis cannot see that parsed packets
// do not escape through {Pre,Post}Filter{In,Out}.
var parsedPacketPool = sync.Pool{New: func() any { return new(packet.Parsed) }}
// FilterFunc is a packet-filtering function with access to the Wrapper device.
// It must not hold onto the packet struct, as its backing storage will be reused.
type FilterFunc func(*packet.Parsed, *Wrapper) filter.Response
// Wrapper augments a tun.Device with packet filtering and injection.
type Wrapper struct {
logf logger.Logf
limitedLogf logger.Logf // aggressively rate-limited logf used for potentially high volume errors
// tdev is the underlying Wrapper device.
tdev tun.Device
isTAP bool // whether tdev is a TAP device
closeOnce sync.Once
// lastActivityAtomic is read/written atomically.
// On 32 bit systems, if the fields above change,
// you might need to add an align64 field here.
lastActivityAtomic mono.Time // time of last send or receive
destIPActivity syncs.AtomicValue[map[netip.Addr]func()]
destMACAtomic syncs.AtomicValue[[6]byte]
discoKey syncs.AtomicValue[key.DiscoPublic]
// natV4Config stores the current NAT configuration.
natV4Config atomic.Pointer[natV4Config]
// vectorBuffer stores the oldest unconsumed packet vector from tdev. It is
// allocated in wrap() and the underlying arrays should never grow.
vectorBuffer [][]byte
// bufferConsumedMu protects bufferConsumed from concurrent sends, closes,
// and send-after-close (by way of bufferConsumedClosed).
bufferConsumedMu sync.Mutex
// bufferConsumedClosed is true when bufferConsumed has been closed. This is
// read by bufferConsumed writers to prevent send-after-close.
bufferConsumedClosed bool
// bufferConsumed synchronizes access to vectorBuffer (shared by Read() and
// pollVector()).
//
// Close closes bufferConsumed and sets bufferConsumedClosed to true.
bufferConsumed chan struct{}
// closed signals poll (by closing) when the device is closed.
closed chan struct{}
// outboundMu protects outbound and vectorOutbound from concurrent sends,
// closes, and send-after-close (by way of outboundClosed).
outboundMu sync.Mutex
// outboundClosed is true when outbound or vectorOutbound have been closed.
// This is read by outbound and vectorOutbound writers to prevent
// send-after-close.
outboundClosed bool
// vectorOutbound is the queue by which packets leave the TUN device.
//
// The directions are relative to the network, not the device:
// inbound packets arrive via UDP and are written into the TUN device;
// outbound packets are read from the TUN device and sent out via UDP.
// This queue is needed because although inbound writes are synchronous,
// the other direction must wait on a WireGuard goroutine to poll it.
//
// Empty reads are skipped by WireGuard, so it is always legal
// to discard an empty packet instead of sending it through vectorOutbound.
//
// Close closes vectorOutbound and sets outboundClosed to true.
vectorOutbound chan tunVectorReadResult
// eventsUpDown yields up and down tun.Events that arrive on a Wrapper's events channel.
eventsUpDown chan tun.Event
// eventsOther yields non-up-and-down tun.Events that arrive on a Wrapper's events channel.
eventsOther chan tun.Event
// filter atomically stores the currently active packet filter
filter atomic.Pointer[filter.Filter]
// filterFlags control the verbosity of logging packet drops/accepts.
filterFlags filter.RunFlags
// PreFilterPacketInboundFromWireGuard is the inbound filter function that runs before the main filter
// and therefore sees the packets that may be later dropped by it.
PreFilterPacketInboundFromWireGuard FilterFunc
// PostFilterPacketInboundFromWireGaurd is the inbound filter function that runs after the main filter.
PostFilterPacketInboundFromWireGaurd FilterFunc
// PreFilterPacketOutboundToWireGuardNetstackIntercept is a filter function that runs before the main filter
// for packets from the local system. This filter is populated by netstack to hook
// packets that should be handled by netstack. If set, this filter runs before
// PreFilterFromTunToEngine.
PreFilterPacketOutboundToWireGuardNetstackIntercept FilterFunc
// PreFilterPacketOutboundToWireGuardEngineIntercept is a filter function that runs before the main filter
// for packets from the local system. This filter is populated by wgengine to hook
// packets which it handles internally. If both this and PreFilterFromTunToNetstack
// filter functions are non-nil, this filter runs second.
PreFilterPacketOutboundToWireGuardEngineIntercept FilterFunc
// PostFilterPacketOutboundToWireGuard is the outbound filter function that runs after the main filter.
PostFilterPacketOutboundToWireGuard FilterFunc
// OnTSMPPongReceived, if non-nil, is called whenever a TSMP pong arrives.
OnTSMPPongReceived func(packet.TSMPPongReply)
// OnICMPEchoResponseReceived, if non-nil, is called whenever a ICMP echo response
// arrives. If the packet is to be handled internally this returns true,
// false otherwise.
OnICMPEchoResponseReceived func(*packet.Parsed) bool
// PeerAPIPort, if non-nil, returns the peerapi port that's
// running for the given IP address.
PeerAPIPort func(netip.Addr) (port uint16, ok bool)
// disableFilter disables all filtering when set. This should only be used in tests.
disableFilter bool
// disableTSMPRejected disables TSMP rejected responses. For tests.
disableTSMPRejected bool
// stats maintains per-connection counters.
stats atomic.Pointer[connstats.Statistics]
captureHook syncs.AtomicValue[capture.Callback]
}
// tunInjectedRead is an injected packet pretending to be a tun.Read().
type tunInjectedRead struct {
// Only one of packet or data should be set, and are read in that order of
// precedence.
packet stack.PacketBufferPtr
data []byte
}
// tunVectorReadResult is the result of a tun.Read(), or an injected packet
// pretending to be a tun.Read().
type tunVectorReadResult struct {
// When err AND data are nil, injected will be set with meaningful data
// (injected packet). If either err OR data is non-nil, injected should be
// ignored (a "real" tun.Read).
err error
data [][]byte
injected tunInjectedRead
dataOffset int
}
type setWrapperer interface {
// setWrapper enables the underlying TUN/TAP to have access to the Wrapper.
// It MUST be called only once during initialization, other usage is unsafe.
setWrapper(*Wrapper)
}
func WrapTAP(logf logger.Logf, tdev tun.Device) *Wrapper {
return wrap(logf, tdev, true)
}
func Wrap(logf logger.Logf, tdev tun.Device) *Wrapper {
return wrap(logf, tdev, false)
}
func wrap(logf logger.Logf, tdev tun.Device, isTAP bool) *Wrapper {
logf = logger.WithPrefix(logf, "tstun: ")
w := &Wrapper{
logf: logf,
limitedLogf: logger.RateLimitedFn(logf, 1*time.Minute, 2, 10),
isTAP: isTAP,
tdev: tdev,
// bufferConsumed is conceptually a condition variable:
// a goroutine should not block when setting it, even with no listeners.
bufferConsumed: make(chan struct{}, 1),
closed: make(chan struct{}),
// vectorOutbound can be unbuffered; the buffer is an optimization.
vectorOutbound: make(chan tunVectorReadResult, 1),
eventsUpDown: make(chan tun.Event),
eventsOther: make(chan tun.Event),
// TODO(dmytro): (highly rate-limited) hexdumps should happen on unknown packets.
filterFlags: filter.LogAccepts | filter.LogDrops,
}
w.vectorBuffer = make([][]byte, tdev.BatchSize())
for i := range w.vectorBuffer {
w.vectorBuffer[i] = make([]byte, maxBufferSize)
}
go w.pollVector()
go w.pumpEvents()
// The buffer starts out consumed.
w.bufferConsumed <- struct{}{}
w.noteActivity()
if sw, ok := w.tdev.(setWrapperer); ok {
sw.setWrapper(w)
}
return w
}
// SetDestIPActivityFuncs sets a map of funcs to run per packet
// destination (the map keys).
//
// The map ownership passes to the Wrapper. It must be non-nil.
func (t *Wrapper) SetDestIPActivityFuncs(m map[netip.Addr]func()) {
t.destIPActivity.Store(m)
}
// SetDiscoKey sets the current discovery key.
//
// It is only used for filtering out bogus traffic when network
// stack(s) get confused; see Issue 1526.
func (t *Wrapper) SetDiscoKey(k key.DiscoPublic) {
t.discoKey.Store(k)
}
// isSelfDisco reports whether packet p
// looks like a Disco packet from ourselves.
// See Issue 1526.
func (t *Wrapper) isSelfDisco(p *packet.Parsed) bool {
if p.IPProto != ipproto.UDP {
return false
}
pkt := p.Payload()
discobs, ok := disco.Source(pkt)
if !ok {
return false
}
discoSrc := key.DiscoPublicFromRaw32(mem.B(discobs))
selfDiscoPub := t.discoKey.Load()
return selfDiscoPub == discoSrc
}
func (t *Wrapper) Close() error {
var err error
t.closeOnce.Do(func() {
close(t.closed)
t.bufferConsumedMu.Lock()
t.bufferConsumedClosed = true
close(t.bufferConsumed)
t.bufferConsumedMu.Unlock()
t.outboundMu.Lock()
t.outboundClosed = true
close(t.vectorOutbound)
t.outboundMu.Unlock()
err = t.tdev.Close()
})
return err
}
// isClosed reports whether t is closed.
func (t *Wrapper) isClosed() bool {
select {
case <-t.closed:
return true
default:
return false
}
}
// pumpEvents copies events from t.tdev to t.eventsUpDown and t.eventsOther.
// pumpEvents exits when t.tdev.events or t.closed is closed.
// pumpEvents closes t.eventsUpDown and t.eventsOther when it exits.
func (t *Wrapper) pumpEvents() {
defer close(t.eventsUpDown)
defer close(t.eventsOther)
src := t.tdev.Events()
for {
// Retrieve an event from the TUN device.
var event tun.Event
var ok bool
select {
case <-t.closed:
return
case event, ok = <-src:
if !ok {
return
}
}
// Pass along event to the correct recipient.
// Though event is a bitmask, in practice there is only ever one bit set at a time.
dst := t.eventsOther
if event&(tun.EventUp|tun.EventDown) != 0 {
dst = t.eventsUpDown
}
select {
case <-t.closed:
return
case dst <- event:
}
}
}
// EventsUpDown returns a TUN event channel that contains all Up and Down events.
func (t *Wrapper) EventsUpDown() chan tun.Event {
return t.eventsUpDown
}
// Events returns a TUN event channel that contains all non-Up, non-Down events.
// It is named Events because it is the set of events that we want to expose to wireguard-go,
// and Events is the name specified by the wireguard-go tun.Device interface.
func (t *Wrapper) Events() <-chan tun.Event {
return t.eventsOther
}
func (t *Wrapper) File() *os.File {
return t.tdev.File()
}
func (t *Wrapper) MTU() (int, error) {
return t.tdev.MTU()
}
func (t *Wrapper) Name() (string, error) {
return t.tdev.Name()
}
const ethernetFrameSize = 14 // 2 six byte MACs, 2 bytes ethertype
// pollVector polls t.tdev.Read(), placing the oldest unconsumed packet vector
// into t.vectorBuffer. This is needed because t.tdev.Read() in general may
// block (it does on Windows), so packets may be stuck in t.vectorOutbound if
// t.Read() called t.tdev.Read() directly.
func (t *Wrapper) pollVector() {
sizes := make([]int, len(t.vectorBuffer))
readOffset := PacketStartOffset
if t.isTAP {
readOffset = PacketStartOffset - ethernetFrameSize
}
for range t.bufferConsumed {
DoRead:
for i := range t.vectorBuffer {
t.vectorBuffer[i] = t.vectorBuffer[i][:cap(t.vectorBuffer[i])]
}
var n int
var err error
for n == 0 && err == nil {
if t.isClosed() {
return
}
n, err = t.tdev.Read(t.vectorBuffer[:], sizes, readOffset)
if t.isTAP && tapDebug {
s := fmt.Sprintf("% x", t.vectorBuffer[0][:])
for strings.HasSuffix(s, " 00") {
s = strings.TrimSuffix(s, " 00")
}
t.logf("TAP read %v, %v: %s", n, err, s)
}
}
for i := range sizes[:n] {
t.vectorBuffer[i] = t.vectorBuffer[i][:readOffset+sizes[i]]
}
if t.isTAP {
if err == nil {
ethernetFrame := t.vectorBuffer[0][readOffset:]
if t.handleTAPFrame(ethernetFrame) {
goto DoRead
}
}
// Fall through. We got an IP packet.
if sizes[0] >= ethernetFrameSize {
t.vectorBuffer[0] = t.vectorBuffer[0][:readOffset+sizes[0]-ethernetFrameSize]
}
if tapDebug {
t.logf("tap regular frame: %x", t.vectorBuffer[0][PacketStartOffset:PacketStartOffset+sizes[0]])
}
}
t.sendVectorOutbound(tunVectorReadResult{
data: t.vectorBuffer[:n],
dataOffset: PacketStartOffset,
err: err,
})
}
}
// sendBufferConsumed does t.bufferConsumed <- struct{}{}.
func (t *Wrapper) sendBufferConsumed() {
t.bufferConsumedMu.Lock()
defer t.bufferConsumedMu.Unlock()
if t.bufferConsumedClosed {
return
}
t.bufferConsumed <- struct{}{}
}
// injectOutbound does t.vectorOutbound <- r
func (t *Wrapper) injectOutbound(r tunInjectedRead) {
t.outboundMu.Lock()
defer t.outboundMu.Unlock()
if t.outboundClosed {
return
}
t.vectorOutbound <- tunVectorReadResult{
injected: r,
}
}
// sendVectorOutbound does t.vectorOutbound <- r.
func (t *Wrapper) sendVectorOutbound(r tunVectorReadResult) {
t.outboundMu.Lock()
defer t.outboundMu.Unlock()
if t.outboundClosed {
return
}
t.vectorOutbound <- r
}
// snatV4 does SNAT on p if it's an IPv4 packet and the destination
// address requires a different source address.
func (t *Wrapper) snatV4(p *packet.Parsed) {
if p.IPVersion != 4 {
return
}
nc := t.natV4Config.Load()
oldSrc := p.Src.Addr()
newSrc := nc.selectSrcIP(oldSrc, p.Dst.Addr())
if oldSrc != newSrc {
p.UpdateSrcAddr(newSrc)
}
}
// dnatV4 does destination NAT on p if it's an IPv4 packet.
func (t *Wrapper) dnatV4(p *packet.Parsed) {
if p.IPVersion != 4 {
return
}
nc := t.natV4Config.Load()
oldDst := p.Dst.Addr()
newDst := nc.mapDstIP(oldDst)
if newDst != oldDst {
p.UpdateDstAddr(newDst)
}
}
// findV4 returns the first Tailscale IPv4 address in addrs.
func findV4(addrs []netip.Prefix) netip.Addr {
for _, ap := range addrs {
a := ap.Addr()
if a.Is4() && tsaddr.IsTailscaleIP(a) {
return a
}
}
return netip.Addr{}
}
// natV4Config is the configuration for IPv4 NAT.
// It should be treated as immutable.
//
// The nil value is a valid configuration.
type natV4Config struct {
// nativeAddr is the IPv4 Tailscale Address of the current node.
nativeAddr netip.Addr
// listenAddrs is the set of IPv4 addresses that should be
// mapped to the native address. These are the addresses that
// peers will use to connect to this node.
listenAddrs views.Map[netip.Addr, struct{}] // masqAddr -> struct{}
// dstMasqAddrs is map of dst addresses to their respective MasqueradeAsIP
// addresses. The MasqueradeAsIP address is the address that should be used
// as the source address for packets to dst.
dstMasqAddrs views.Map[netip.Addr, netip.Addr] // dst -> masqAddr
// TODO(maisem/nyghtowl): add support for subnets and exit nodes and test them.
// Determine IP routing table algorithm to use - e.g. ART?
}
// mapDstIP returns the destination IP to use for a packet to dst.
// If dst is not one of the listen addresses, it is returned as-is,
// otherwise the native address is returned.
func (c *natV4Config) mapDstIP(oldDst netip.Addr) netip.Addr {
if c == nil {
return oldDst
}
if _, ok := c.listenAddrs.GetOk(oldDst); ok {
return c.nativeAddr
}
return oldDst
}
// selectSrcIP returns the source IP to use for a packet to dst.
// If the packet is not from the native address, it is returned as-is.
func (c *natV4Config) selectSrcIP(oldSrc, dst netip.Addr) netip.Addr {
if c == nil {
return oldSrc
}
if oldSrc != c.nativeAddr {
return oldSrc
}
if eip, ok := c.dstMasqAddrs.GetOk(dst); ok {
return eip
}
return oldSrc
}
// natConfigFromNetMap generates a natV4Config from nm.
// If v4 NAT is not required, it returns nil.
func natConfigFromNetMap(nm *netmap.NetworkMap) *natV4Config {
if nm == nil || nm.SelfNode == nil {
return nil
}
nativeAddr := findV4(nm.SelfNode.Addresses)
if !nativeAddr.IsValid() {
return nil
}
var (
dstMasqAddrs map[netip.Addr]netip.Addr
listenAddrs map[netip.Addr]struct{}
)
for _, p := range nm.Peers {
if !p.SelfNodeV4MasqAddrForThisPeer.IsValid() {
continue
}
peerV4 := findV4(p.Addresses)
if !peerV4.IsValid() {
continue
}
mak.Set(&dstMasqAddrs, peerV4, p.SelfNodeV4MasqAddrForThisPeer)
mak.Set(&listenAddrs, p.SelfNodeV4MasqAddrForThisPeer, struct{}{})
}
if len(listenAddrs) == 0 || len(dstMasqAddrs) == 0 {
return nil
}
return &natV4Config{
nativeAddr: nativeAddr,
listenAddrs: views.MapOf(listenAddrs),
dstMasqAddrs: views.MapOf(dstMasqAddrs),
}
}
// SetNetMap is called when a new NetworkMap is received.
// It currently (2023-03-01) only updates the IPv4 NAT configuration.
func (t *Wrapper) SetNetMap(nm *netmap.NetworkMap) {
cfg := natConfigFromNetMap(nm)
t.natV4Config.Store(cfg)
t.logf("nat config: %+v", cfg)
}
var (
magicDNSIPPort = netip.AddrPortFrom(tsaddr.TailscaleServiceIP(), 0) // 100.100.100.100:0
magicDNSIPPortv6 = netip.AddrPortFrom(tsaddr.TailscaleServiceIPv6(), 0)
)
func (t *Wrapper) filterPacketOutboundToWireGuard(p *packet.Parsed) filter.Response {
// Fake ICMP echo responses to MagicDNS (100.100.100.100).
if p.IsEchoRequest() {
switch p.Dst {
case magicDNSIPPort:
header := p.ICMP4Header()
header.ToResponse()
outp := packet.Generate(&header, p.Payload())
t.InjectInboundCopy(outp)
return filter.DropSilently // don't pass on to OS; already handled
case magicDNSIPPortv6:
header := p.ICMP6Header()
header.ToResponse()
outp := packet.Generate(&header, p.Payload())
t.InjectInboundCopy(outp)
return filter.DropSilently // don't pass on to OS; already handled
}
}
// Issue 1526 workaround: if we sent disco packets over
// Tailscale from ourselves, then drop them, as that shouldn't
// happen unless a networking stack is confused, as it seems
// macOS in Network Extension mode might be.
if p.IPProto == ipproto.UDP && // disco is over UDP; avoid isSelfDisco call for TCP/etc
t.isSelfDisco(p) {
t.limitedLogf("[unexpected] received self disco out packet over tstun; dropping")
metricPacketOutDropSelfDisco.Add(1)
return filter.DropSilently
}
if t.PreFilterPacketOutboundToWireGuardNetstackIntercept != nil {
if res := t.PreFilterPacketOutboundToWireGuardNetstackIntercept(p, t); res.IsDrop() {
// Handled by netstack.Impl.handleLocalPackets (quad-100 DNS primarily)
return res
}
}
if t.PreFilterPacketOutboundToWireGuardEngineIntercept != nil {
if res := t.PreFilterPacketOutboundToWireGuardEngineIntercept(p, t); res.IsDrop() {
// Handled by userspaceEngine.handleLocalPackets (primarily handles
// quad-100 if netstack is not installed).
return res
}
}
filt := t.filter.Load()
if filt == nil {
return filter.Drop
}
if filt.RunOut(p, t.filterFlags) != filter.Accept {
metricPacketOutDropFilter.Add(1)
return filter.Drop
}
if t.PostFilterPacketOutboundToWireGuard != nil {
if res := t.PostFilterPacketOutboundToWireGuard(p, t); res.IsDrop() {
return res
}
}
return filter.Accept
}
// noteActivity records that there was a read or write at the current time.
func (t *Wrapper) noteActivity() {
t.lastActivityAtomic.StoreAtomic(mono.Now())
}
// IdleDuration reports how long it's been since the last read or write to this device.
//
// Its value should only be presumed accurate to roughly 10ms granularity.
// If there's never been activity, the duration is since the wrapper was created.
func (t *Wrapper) IdleDuration() time.Duration {
return mono.Since(t.lastActivityAtomic.LoadAtomic())
}
func (t *Wrapper) Read(buffs [][]byte, sizes []int, offset int) (int, error) {
// packet from OS read and sent to WG
res, ok := <-t.vectorOutbound
if !ok {
return 0, io.EOF
}
if res.err != nil && len(res.data) == 0 {
return 0, res.err
}
if res.data == nil {
n, err := t.injectedRead(res.injected, buffs[0], offset)
sizes[0] = n
if err != nil && n == 0 {
return 0, err
}
return 1, err
}
metricPacketOut.Add(int64(len(res.data)))
var buffsPos int
p := parsedPacketPool.Get().(*packet.Parsed)
defer parsedPacketPool.Put(p)
for _, data := range res.data {
p.Decode(data[res.dataOffset:])
t.snatV4(p)
if m := t.destIPActivity.Load(); m != nil {
if fn := m[p.Dst.Addr()]; fn != nil {
fn()
}
}
if capt := t.captureHook.Load(); capt != nil {
capt(capture.FromLocal, time.Now(), data[res.dataOffset:])
}
if !t.disableFilter {
response := t.filterPacketOutboundToWireGuard(p)
if response != filter.Accept {
metricPacketOutDrop.Add(1)
continue
}
}
n := copy(buffs[buffsPos][offset:], data[res.dataOffset:])
if n != len(data)-res.dataOffset {
panic(fmt.Sprintf("short copy: %d != %d", n, len(data)-res.dataOffset))
}
sizes[buffsPos] = n
if stats := t.stats.Load(); stats != nil {
stats.UpdateTxVirtual(data[res.dataOffset:])
}
buffsPos++
}
// t.vectorBuffer has a fixed location in memory.
// TODO(raggi): add an explicit field and possibly method to the tunVectorReadResult
// to signal when sendBufferConsumed should be called.
if &res.data[0] == &t.vectorBuffer[0] {
// We are done with t.buffer. Let poll() re-use it.
t.sendBufferConsumed()
}
t.noteActivity()
return buffsPos, res.err
}
// injectedRead handles injected reads, which bypass filters.
func (t *Wrapper) injectedRead(res tunInjectedRead, buf []byte, offset int) (int, error) {
metricPacketOut.Add(1)
var n int
if !res.packet.IsNil() {
n = copy(buf[offset:], res.packet.NetworkHeader().Slice())
n += copy(buf[offset+n:], res.packet.TransportHeader().Slice())
n += copy(buf[offset+n:], res.packet.Data().AsRange().ToSlice())
res.packet.DecRef()
} else {
n = copy(buf[offset:], res.data)
}
p := parsedPacketPool.Get().(*packet.Parsed)
defer parsedPacketPool.Put(p)
p.Decode(buf[offset : offset+n])
t.snatV4(p)
if m := t.destIPActivity.Load(); m != nil {
if fn := m[p.Dst.Addr()]; fn != nil {
fn()
}
}
if stats := t.stats.Load(); stats != nil {
stats.UpdateTxVirtual(buf[offset:][:n])
}
t.noteActivity()
return n, nil
}
func (t *Wrapper) filterPacketInboundFromWireGuard(p *packet.Parsed) filter.Response {
if capt := t.captureHook.Load(); capt != nil {
capt(capture.FromPeer, time.Now(), p.Buffer())
}
if p.IPProto == ipproto.TSMP {
if pingReq, ok := p.AsTSMPPing(); ok {
t.noteActivity()
t.injectOutboundPong(p, pingReq)
return filter.DropSilently
} else if data, ok := p.AsTSMPPong(); ok {
if f := t.OnTSMPPongReceived; f != nil {
f(data)
}
}
}
if p.IsEchoResponse() {
if f := t.OnICMPEchoResponseReceived; f != nil && f(p) {
// Note: this looks dropped in metrics, even though it was
// handled internally.
return filter.DropSilently
}
}
// Issue 1526 workaround: if we see disco packets over
// Tailscale from ourselves, then drop them, as that shouldn't
// happen unless a networking stack is confused, as it seems
// macOS in Network Extension mode might be.
if p.IPProto == ipproto.UDP && // disco is over UDP; avoid isSelfDisco call for TCP/etc
t.isSelfDisco(p) {
t.limitedLogf("[unexpected] received self disco in packet over tstun; dropping")
metricPacketInDropSelfDisco.Add(1)
return filter.DropSilently
}
if t.PreFilterPacketInboundFromWireGuard != nil {
if res := t.PreFilterPacketInboundFromWireGuard(p, t); res.IsDrop() {
return res
}
}
filt := t.filter.Load()
if filt == nil {
return filter.Drop
}
outcome := filt.RunIn(p, t.filterFlags)
// Let peerapi through the filter; its ACLs are handled at L7,
// not at the packet level.
if outcome != filter.Accept &&
p.IPProto == ipproto.TCP &&
p.TCPFlags&packet.TCPSyn != 0 &&
t.PeerAPIPort != nil {
if port, ok := t.PeerAPIPort(p.Dst.Addr()); ok && port == p.Dst.Port() {
outcome = filter.Accept
}
}
if outcome != filter.Accept {
metricPacketInDropFilter.Add(1)
// Tell them, via TSMP, we're dropping them due to the ACL.
// Their host networking stack can translate this into ICMP
// or whatnot as required. But notably, their GUI or tailscale CLI
// can show them a rejection history with reasons.
if p.IPVersion == 4 && p.IPProto == ipproto.TCP && p.TCPFlags&packet.TCPSyn != 0 && !t.disableTSMPRejected {
rj := packet.TailscaleRejectedHeader{
IPSrc: p.Dst.Addr(),
IPDst: p.Src.Addr(),
Src: p.Src,
Dst: p.Dst,
Proto: p.IPProto,
Reason: packet.RejectedDueToACLs,
}
if filt.ShieldsUp() {
rj.Reason = packet.RejectedDueToShieldsUp
}
pkt := packet.Generate(rj, nil)
t.InjectOutbound(pkt)
// TODO(bradfitz): also send a TCP RST, after the TSMP message.
}
return filter.Drop
}
if t.PostFilterPacketInboundFromWireGaurd != nil {
if res := t.PostFilterPacketInboundFromWireGaurd(p, t); res.IsDrop() {
return res
}
}
return filter.Accept
}
// Write accepts incoming packets. The packets begins at buffs[:][offset:],
// like wireguard-go/tun.Device.Write.
func (t *Wrapper) Write(buffs [][]byte, offset int) (int, error) {
metricPacketIn.Add(int64(len(buffs)))
i := 0
p := parsedPacketPool.Get().(*packet.Parsed)
defer parsedPacketPool.Put(p)
for _, buff := range buffs {
p.Decode(buff[offset:])
t.dnatV4(p)
if !t.disableFilter {
if t.filterPacketInboundFromWireGuard(p) != filter.Accept {
metricPacketInDrop.Add(1)
} else {
buffs[i] = buff
i++
}
}
}
if t.disableFilter {
i = len(buffs)
}
buffs = buffs[:i]
if len(buffs) > 0 {
t.noteActivity()
_, err := t.tdevWrite(buffs, offset)
return len(buffs), err
}
return 0, nil
}
func (t *Wrapper) tdevWrite(buffs [][]byte, offset int) (int, error) {
if stats := t.stats.Load(); stats != nil {
for i := range buffs {
stats.UpdateRxVirtual((buffs)[i][offset:])
}
}
return t.tdev.Write(buffs, offset)
}
func (t *Wrapper) GetFilter() *filter.Filter {
return t.filter.Load()
}
func (t *Wrapper) SetFilter(filt *filter.Filter) {
t.filter.Store(filt)
}
// InjectInboundPacketBuffer makes the Wrapper device behave as if a packet
// with the given contents was received from the network.
// It takes ownership of one reference count on the packet. The injected
// packet will not pass through inbound filters.
//
// This path is typically used to deliver synthesized packets to the
// host networking stack.
func (t *Wrapper) InjectInboundPacketBuffer(pkt stack.PacketBufferPtr) error {
buf := make([]byte, PacketStartOffset+pkt.Size())
n := copy(buf[PacketStartOffset:], pkt.NetworkHeader().Slice())
n += copy(buf[PacketStartOffset+n:], pkt.TransportHeader().Slice())
n += copy(buf[PacketStartOffset+n:], pkt.Data().AsRange().ToSlice())
if n != pkt.Size() {
panic("unexpected packet size after copy")
}
pkt.DecRef()
if capt := t.captureHook.Load(); capt != nil {
capt(capture.SynthesizedToLocal, time.Now(), buf[PacketStartOffset:])
}
p := parsedPacketPool.Get().(*packet.Parsed)
defer parsedPacketPool.Put(p)
p.Decode(buf[PacketStartOffset:])
t.dnatV4(p)
return t.InjectInboundDirect(buf, PacketStartOffset)
}
// InjectInboundDirect makes the Wrapper device behave as if a packet
// with the given contents was received from the network.
// It blocks and does not take ownership of the packet.
// The injected packet will not pass through inbound filters.
//
// The packet contents are to start at &buf[offset].
// offset must be greater or equal to PacketStartOffset.
// The space before &buf[offset] will be used by WireGuard.
func (t *Wrapper) InjectInboundDirect(buf []byte, offset int) error {
if len(buf) > MaxPacketSize {
return errPacketTooBig
}
if len(buf) < offset {
return errOffsetTooBig
}
if offset < PacketStartOffset {
return errOffsetTooSmall
}
// Write to the underlying device to skip filters.
_, err := t.tdevWrite([][]byte{buf}, offset) // TODO(jwhited): alloc?
return err
}
// InjectInboundCopy takes a packet without leading space,
// reallocates it to conform to the InjectInboundDirect interface
// and calls InjectInboundDirect on it. Injecting a nil packet is a no-op.
func (t *Wrapper) InjectInboundCopy(packet []byte) error {
// We duplicate this check from InjectInboundDirect here
// to avoid wasting an allocation on an oversized packet.
if len(packet) > MaxPacketSize {
return errPacketTooBig
}
if len(packet) == 0 {
return nil
}
buf := make([]byte, PacketStartOffset+len(packet))
copy(buf[PacketStartOffset:], packet)
return t.InjectInboundDirect(buf, PacketStartOffset)
}
func (t *Wrapper) injectOutboundPong(pp *packet.Parsed, req packet.TSMPPingRequest) {
pong := packet.TSMPPongReply{
Data: req.Data,
}
if t.PeerAPIPort != nil {
pong.PeerAPIPort, _ = t.PeerAPIPort(pp.Dst.Addr())
}
switch pp.IPVersion {
case 4:
h4 := pp.IP4Header()
h4.ToResponse()
pong.IPHeader = h4
case 6:
h6 := pp.IP6Header()
h6.ToResponse()
pong.IPHeader = h6
default:
return
}
t.InjectOutbound(packet.Generate(pong, nil))
}
// InjectOutbound makes the Wrapper device behave as if a packet
// with the given contents was sent to the network.
// It does not block, but takes ownership of the packet.
// The injected packet will not pass through outbound filters.
// Injecting an empty packet is a no-op.
func (t *Wrapper) InjectOutbound(packet []byte) error {
if len(packet) > MaxPacketSize {
return errPacketTooBig
}
if len(packet) == 0 {
return nil
}
t.injectOutbound(tunInjectedRead{data: packet})
return nil
}
// InjectOutboundPacketBuffer logically behaves as InjectOutbound. It takes ownership of one
// reference count on the packet, and the packet may be mutated. The packet refcount will be
// decremented after the injected buffer has been read.
func (t *Wrapper) InjectOutboundPacketBuffer(packet stack.PacketBufferPtr) error {
size := packet.Size()
if size > MaxPacketSize {
packet.DecRef()
return errPacketTooBig
}
if size == 0 {
packet.DecRef()
return nil
}
if capt := t.captureHook.Load(); capt != nil {
b := packet.ToBuffer()
capt(capture.SynthesizedToPeer, time.Now(), b.Flatten())
}
t.injectOutbound(tunInjectedRead{packet: packet})
return nil
}
func (t *Wrapper) BatchSize() int {
return t.tdev.BatchSize()
}
// Unwrap returns the underlying tun.Device.
func (t *Wrapper) Unwrap() tun.Device {
return t.tdev
}
// SetStatistics specifies a per-connection statistics aggregator.
// Nil may be specified to disable statistics gathering.
func (t *Wrapper) SetStatistics(stats *connstats.Statistics) {
t.stats.Store(stats)
}
var (
metricPacketIn = clientmetric.NewCounter("tstun_in_from_wg")
metricPacketInDrop = clientmetric.NewCounter("tstun_in_from_wg_drop")
metricPacketInDropFilter = clientmetric.NewCounter("tstun_in_from_wg_drop_filter")
metricPacketInDropSelfDisco = clientmetric.NewCounter("tstun_in_from_wg_drop_self_disco")
metricPacketOut = clientmetric.NewCounter("tstun_out_to_wg")
metricPacketOutDrop = clientmetric.NewCounter("tstun_out_to_wg_drop")
metricPacketOutDropFilter = clientmetric.NewCounter("tstun_out_to_wg_drop_filter")
metricPacketOutDropSelfDisco = clientmetric.NewCounter("tstun_out_to_wg_drop_self_disco")
)
func (t *Wrapper) InstallCaptureHook(cb capture.Callback) {
t.captureHook.Store(cb)
}