yggdrasil-go/CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[0.3.3] - 2018-02-18

Added

• Dynamic reconfiguration, which allows reloading the configuration file to make changes during runtime by sending a SIGHUP signal (note: this only works with -useconffile and not -useconf and currently reconfiguring TUN/TAP is not supported)
• Support for building Yggdrasil as an iOS or Android framework if the appropriate tools (e.g. gomobile/gobind + SDKs) are available
• Connection contexts used for TCP connections which allow more exotic socket options to be set, e.g.
  • Reusing the multicast socket to allow multiple running Yggdrasil instances without having to disable multicast
  • Allowing supported Macs to peer with other nearby Macs that aren't even on the same Wi-Fi network using AWDL
• Flexible logging support, which allows for logging at different levels of verbosity

Changed

• Switch changes to improve parent selection
• Node configuration is now stored centrally, rather than having fragments/copies distributed at startup time
• Significant refactoring in various areas, including for link types (TCP, AWDL etc), generic streams and adapters
• macOS builds through CircleCI are now 64-bit only

Fixed

• Simplified systemd service now in contrib

Removed

• ReadTimeout option is now deprecated

[0.3.2] - 2018-12-26

Added

• The admin socket is now multithreaded, greatly improving performance of the crawler and allowing concurrent lookups to take place
• The ability to hide NodeInfo defaults through either setting the NodeInfoPrivacy option or through setting individual NodeInfo attributes to null

Changed

• The armhf build now targets ARMv6 instead of ARMv7, adding support for Raspberry Pi Zero and other older models, amongst others

Fixed

• DHT entries are now populated using a copy in memory to fix various potential DHT bugs
• DHT traffic should now throttle back exponentially to reduce idle traffic
• Adjust how nodes are inserted into the DHT which should help to reduce some incorrect DHT traffic
• In TAP mode, the NDP target address is now correctly used when populating the peer MAC table. This fixes serious connectivity problems when in TAP mode, particularly on BSD
• In TUN mode, ICMPv6 packets are now ignored whereas they were incorrectly processed before

[0.3.1] - 2018-12-17

Added

• Build name and version is now imprinted onto the binaries if available/specified during build
• Ability to disable admin socket with AdminListen: none
• AF_UNIX domain sockets for the admin socket
• Cache size restriction for crypto-key routes
• NodeInfo support for specifying node information, e.g. node name or contact, which can be used in network crawls or surveys
• getNodeInfo request added to admin socket
• Adds flags -c, -l and -t to build script for specifying GCFLAGS, LDFLAGS or whether to keep symbol/DWARF tables

Changed

• Default AdminListen in newly generated config is now unix:///var/run/yggdrasil.sock
• Formatting of getRoutes in the admin socket has been improved
• Debian package now adds yggdrasil group to assist with AF_UNIX admin socket permissions
• Crypto, address and other utility code refactored into separate Go packages

Fixed

• Switch peer convergence is now much faster again (previously it was taking up to a minute once the peering was established)
• yggdrasilctl is now less prone to crashing when parameters are specified incorrectly
• Panic fixed when Peers or InterfacePeers was commented out

[0.3.0] - 2018-12-12

Added

• Crypto-key routing support for tunnelling both IPv4 and IPv6 over Yggdrasil
• Add advanced SwitchOptions in configuration file for tuning the switch
• Add dhtPing to the admin socket to aid in crawling the network
• New macOS .pkgs built automatically by CircleCI
• Add Dockerfile to repository for Docker support
• Add -json command line flag for generating and normalising configuration in plain JSON instead of HJSON
• Build name and version numbers are now imprinted onto the build, accessible through yggdrasil -version and yggdrasilctl getSelf
• Add ability to disable admin socket by setting AdminListen to "none"
• yggdrasilctl now tries to look for the default configuration file to find AdminListen if -endpoint is not specified
• yggdrasilctl now returns more useful logging in the event of a fatal error

Changed

• Switched to Chord DHT (instead of Kademlia, although still compatible at the protocol level)
• The AdminListen option and yggdrasilctl now default to unix:///var/run/yggdrasil.sock on BSDs, macOS and Linux
• Cleaned up some of the parameter naming in the admin socket
• Latency-based parent selection for the switch instead of uptime-based (should help to avoid high latency links somewhat)
• Real peering endpoints now shown in the admin socket getPeers call to help identify peerings
• Reuse the multicast port on supported platforms so that multiple Yggdrasil processes can run
• yggdrasilctl now has more useful help text (with -help or when no arguments passed)

Fixed

• Memory leaks in the DHT fixed
• Crash fixed where the ICMPv6 NDP goroutine would incorrectly start in TUN mode
• Removing peers from the switch table if they stop sending switch messages but keep the TCP connection alive

[0.2.7] - 2018-10-13

Added

• Session firewall, which makes it possible to control who can open sessions with your node
• Add getSwitchQueues to admin socket
• Add InterfacePeers for configuring static peerings via specific network interfaces
• More output shown in getSwitchPeers
• FreeBSD service script in contrib

Changed

• CircleCI builds are now built with Go 1.11 instead of Go 1.9

Fixed

• Race condition in the switch table, reported by trn
• Debug builds are now tested by CircleCI as well as platform release builds
• Port number fixed on admin graph from unknown nodes

[0.2.6] - 2018-07-31

Added

• Configurable TCP timeouts to assist in peering over Tor/I2P
• Prefer IPv6 flow label when extending coordinates to sort backpressure queues
• arm64 builds through CircleCI

Changed

• Sort dot graph links by integer value

[0.2.5] - 2018-07-19

Changed

• Make yggdrasilctl less case sensitive
• More verbose TCP disconnect messages

Fixed

• Fixed debug builds
• Cap maximum MTU on Linux in TAP mode
• Process successfully-read TCP traffic before checking for / handling errors (fixes EOF behavior)

[0.2.4] - 2018-07-08

Added

• Support for UNIX domain sockets for the admin socket using unix:///path/to/file.sock
• Centralised platform-specific defaults

Changed

• Backpressure tuning, including reducing resource consumption

Fixed

• macOS local ping bug, which previously prevented you from pinging your own utun adapter's IPv6 address

[0.2.3] - 2018-06-29

Added

• Begin keeping changelog (incomplete and possibly inaccurate information before this point).
• Build RPMs in CircleCI using alien. This provides package support for Fedora, Red Hat Enterprise Linux, CentOS and other RPM-based distributions.

Changed

• Local backpressure improvements.
• Change box_pub_key to key in admin API for simplicity.
• Session cleanup.

[0.2.2] - 2018-06-21

Added

• Add yggdrasilconf utility for testing with the vyatta-yggdrasil package.
• Add a randomized retry delay after TCP disconnects, to prevent synchronization livelocks.

Changed

• Update build script to strip by default, which significantly reduces the size of the binary.
• Add debug -d and UPX -u flags to the build script.
• Start pprof in debug builds based on an environment variable (e.g. PPROFLISTEN=localhost:6060), instead of a flag.

Fixed

• Fix typo in big-endian BOM so that both little-endian and big-endian UTF-16 files are detected correctly.

[0.2.1] - 2018-06-15

Changed

• The address range was moved from fd00::/8 to 200::/7. This range was chosen as it is marked as deprecated. The change prevents overlap with other ULA privately assigned ranges.

Fixed

• UTF-16 detection conversion for configuration files, which can particularly be a problem on Windows 10 if a configuration file is generated from within PowerShell.
• Fixes to the Debian package control file.
• Fixes to the launchd service for macOS.
• Fixes to the DHT and switch.

[0.2.0] - 2018-06-13

Added

• Exchange version information during connection setup, to prevent connections with incompatible versions.

Changed

• Wire format changes (backwards incompatible).
• Less maintenance traffic per peer.
• Exponential back-off for DHT maintenance traffic (less maintenance traffic for known good peers).
• Iterative DHT (added some time between v0.1.0 and here).
• Use local queue sizes for a sort of local-only backpressure routing, instead of the removed bandwidth estimates, when deciding where to send a packet.

Removed

• UDP peering, this may be added again if/when a better implementation appears.
• Per peer bandwidth estimation, as this has been replaced with an early local backpressure implementation.

[0.1.0] - 2018-02-01

Added

• Adopt semantic versioning.

Changed

• Wire format changes (backwards incompatible).
• Many other undocumented changes leading up to this release and before the next one.

[0.0.1] - 2017-12-28

Added

• First commit.
• Initial public release.