2023-10-10 13:20:53 +00:00
|
|
|
package handlers
|
|
|
|
|
|
|
|
|
|
import (
|
|
|
|
|
"context"
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
"database/sql"
|
2023-10-10 13:20:53 +00:00
|
|
|
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/command"
|
2024-09-26 07:14:33 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/notification/senders"
|
2023-10-10 13:20:53 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/repository/milestone"
|
|
|
|
|
"github.com/zitadel/zitadel/internal/repository/quota"
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
type Commands interface {
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
RequestNotification(ctx context.Context, instanceID string, request *command.NotificationRequest) error
|
|
|
|
|
NotificationCanceled(ctx context.Context, tx *sql.Tx, id, resourceOwner string, err error) error
|
|
|
|
|
NotificationRetryRequested(ctx context.Context, tx *sql.Tx, id, resourceOwner string, request *command.NotificationRetryRequest, err error) error
|
|
|
|
|
NotificationSent(ctx context.Context, tx *sql.Tx, id, instanceID string) error
|
2023-10-10 13:20:53 +00:00
|
|
|
HumanInitCodeSent(ctx context.Context, orgID, userID string) error
|
|
|
|
|
HumanEmailVerificationCodeSent(ctx context.Context, orgID, userID string) error
|
2024-09-26 07:14:33 +00:00
|
|
|
PasswordCodeSent(ctx context.Context, orgID, userID string, generatorInfo *senders.CodeGeneratorInfo) error
|
|
|
|
|
HumanOTPSMSCodeSent(ctx context.Context, userID, resourceOwner string, generatorInfo *senders.CodeGeneratorInfo) error
|
2023-10-10 13:20:53 +00:00
|
|
|
HumanOTPEmailCodeSent(ctx context.Context, userID, resourceOwner string) error
|
2024-09-26 07:14:33 +00:00
|
|
|
OTPSMSSent(ctx context.Context, sessionID, resourceOwner string, generatorInfo *senders.CodeGeneratorInfo) error
|
2023-10-10 13:20:53 +00:00
|
|
|
OTPEmailSent(ctx context.Context, sessionID, resourceOwner string) error
|
|
|
|
|
UserDomainClaimedSent(ctx context.Context, orgID, userID string) error
|
|
|
|
|
HumanPasswordlessInitCodeSent(ctx context.Context, userID, resourceOwner, codeID string) error
|
|
|
|
|
PasswordChangeSent(ctx context.Context, orgID, userID string) error
|
2024-09-26 07:14:33 +00:00
|
|
|
HumanPhoneVerificationCodeSent(ctx context.Context, orgID, userID string, generatorInfo *senders.CodeGeneratorInfo) error
|
2024-09-11 10:53:55 +00:00
|
|
|
InviteCodeSent(ctx context.Context, orgID, userID string) error
|
2023-10-10 13:20:53 +00:00
|
|
|
UsageNotificationSent(ctx context.Context, dueEvent *quota.NotificationDueEvent) error
|
2024-10-28 08:29:34 +00:00
|
|
|
MilestonePushed(ctx context.Context, instanceID string, msType milestone.Type, endpoints []string) error
|
2023-10-10 13:20:53 +00:00
|
|
|
}
|