2023-03-28 22:09:06 +00:00
|
|
|
package notification
|
|
|
|
|
|
|
|
import (
|
|
|
|
"context"
|
2024-10-31 14:57:17 +00:00
|
|
|
"time"
|
2023-03-28 22:09:06 +00:00
|
|
|
|
|
|
|
"github.com/zitadel/zitadel/internal/command"
|
|
|
|
"github.com/zitadel/zitadel/internal/crypto"
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/database"
|
2023-03-28 22:09:06 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/eventstore"
|
2024-01-25 16:28:20 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/eventstore/handler/v2"
|
2023-03-28 22:09:06 +00:00
|
|
|
"github.com/zitadel/zitadel/internal/notification/handlers"
|
|
|
|
_ "github.com/zitadel/zitadel/internal/notification/statik"
|
|
|
|
"github.com/zitadel/zitadel/internal/query"
|
|
|
|
"github.com/zitadel/zitadel/internal/query/projection"
|
|
|
|
)
|
|
|
|
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
var (
|
|
|
|
projections []*handler.Handler
|
|
|
|
worker *handlers.NotificationWorker
|
|
|
|
)
|
2024-01-25 16:28:20 +00:00
|
|
|
|
|
|
|
func Register(
|
2023-03-28 22:09:06 +00:00
|
|
|
ctx context.Context,
|
2024-10-31 14:57:17 +00:00
|
|
|
userHandlerCustomConfig, quotaHandlerCustomConfig, telemetryHandlerCustomConfig, backChannelLogoutHandlerCustomConfig projection.CustomConfig,
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
notificationWorkerConfig handlers.WorkerConfig,
|
2023-07-06 06:38:13 +00:00
|
|
|
telemetryCfg handlers.TelemetryPusherConfig,
|
2023-07-06 17:31:08 +00:00
|
|
|
externalDomain string,
|
2023-03-28 22:09:06 +00:00
|
|
|
externalPort uint16,
|
|
|
|
externalSecure bool,
|
|
|
|
commands *command.Commands,
|
|
|
|
queries *query.Queries,
|
|
|
|
es *eventstore.Eventstore,
|
2024-10-31 14:57:17 +00:00
|
|
|
otpEmailTmpl, fileSystemPath string,
|
|
|
|
userEncryption, smtpEncryption, smsEncryption, keysEncryptionAlg crypto.EncryptionAlgorithm,
|
|
|
|
tokenLifetime time.Duration,
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
client *database.DB,
|
2023-03-28 22:09:06 +00:00
|
|
|
) {
|
2023-12-05 11:12:01 +00:00
|
|
|
q := handlers.NewNotificationQueries(queries, es, externalDomain, externalPort, externalSecure, fileSystemPath, userEncryption, smtpEncryption, smsEncryption)
|
2023-10-10 13:20:53 +00:00
|
|
|
c := newChannels(q)
|
2024-12-06 09:56:19 +00:00
|
|
|
projections = append(projections, handlers.NewUserNotifier(ctx, projection.ApplyCustomConfig(userHandlerCustomConfig), commands, q, c, otpEmailTmpl, notificationWorkerConfig.LegacyEnabled))
|
2024-01-25 16:28:20 +00:00
|
|
|
projections = append(projections, handlers.NewQuotaNotifier(ctx, projection.ApplyCustomConfig(quotaHandlerCustomConfig), commands, q, c))
|
2024-10-31 14:57:17 +00:00
|
|
|
projections = append(projections, handlers.NewBackChannelLogoutNotifier(
|
|
|
|
ctx,
|
|
|
|
projection.ApplyCustomConfig(backChannelLogoutHandlerCustomConfig),
|
|
|
|
commands,
|
|
|
|
q,
|
|
|
|
es,
|
|
|
|
keysEncryptionAlg,
|
|
|
|
c,
|
|
|
|
tokenLifetime,
|
|
|
|
))
|
2023-07-06 06:38:13 +00:00
|
|
|
if telemetryCfg.Enabled {
|
2024-01-25 16:28:20 +00:00
|
|
|
projections = append(projections, handlers.NewTelemetryPusher(ctx, telemetryCfg, projection.ApplyCustomConfig(telemetryHandlerCustomConfig), commands, q, c))
|
|
|
|
}
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
worker = handlers.NewNotificationWorker(notificationWorkerConfig, commands, q, es, client, c)
|
2024-01-25 16:28:20 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
func Start(ctx context.Context) {
|
|
|
|
for _, projection := range projections {
|
|
|
|
projection.Start(ctx)
|
2023-07-06 06:38:13 +00:00
|
|
|
}
|
feat(notification): use event worker pool (#8962)
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes #8931
2024-11-27 15:01:17 +00:00
|
|
|
worker.Start(ctx)
|
2023-03-28 22:09:06 +00:00
|
|
|
}
|
2024-01-25 16:28:20 +00:00
|
|
|
|
2024-05-30 09:35:30 +00:00
|
|
|
func ProjectInstance(ctx context.Context) error {
|
|
|
|
for _, projection := range projections {
|
|
|
|
_, err := projection.Trigger(ctx)
|
|
|
|
if err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
2024-01-25 16:28:20 +00:00
|
|
|
func Projections() []*handler.Handler {
|
|
|
|
return projections
|
|
|
|
}
|