# Which Problems Are Solved
Zitadel encounters a migration error when setting `restricted languages`
and fails to start.
# How the Problems Are Solved
The problem is that there is a check that checks that at least one of
the restricted languages is the same as the `default language`, however,
in the `authz instance` (where the default language is pulled form) is
never set.
I've added code to set the `default language` in the `authz instance`
# Additional Context
- Closes https://github.com/zitadel/zitadel/issues/9787
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
if Zitadel was started using `start-from-init` or `start-from-setup`
there were rare cases where a panic occured when
`Notifications.LegacyEnabled` was set to false. The cause was a list
which was not reset before refilling.
# How the Problems Are Solved
The list is now reset before each time it gets filled.
# Additional Changes
Ensure all contexts are canceled for the init and setup functions for
`start-from-init- or `start-from-setup` commands.
# Additional Context
none
# Eventstore fixes
- `event.Position` used float64 before which can lead to [precision
loss](https://github.com/golang/go/issues/47300). The type got replaced
by [a type without precision
loss](https://github.com/jackc/pgx-shopspring-decimal)
- the handler reported the wrong error if the current state was updated
and therefore took longer to retry failed events.
# Mirror fixes
- max age of auth requests can be configured to speed up copying data
from `auth.auth_requests` table. Auth requests last updated before the
set age will be ignored. Default is 1 month
- notification projections are skipped because notifications should be
sent by the source system. The projections are set to the latest
position
- ensure that mirror can be executed multiple times
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
ZITADEL uses the notification triggering requests Forwarded or
X-Forwarded-Proto header to build the button link sent in emails for
confirming a password reset with the emailed code. If this header is
overwritten and a user clicks the link to a malicious site in the email,
the secret code can be retrieved and used to reset the users password
and take over his account.
Accounts with MFA or Passwordless enabled can not be taken over by this
attack.
# How the Problems Are Solved
- The `X-Forwarded-Proto` and `proto` of the Forwarded headers are
validated (http / https).
- Additionally, when exposing ZITADEL through https. An overwrite to
http is no longer possible.
# Additional Changes
None
# Additional Context
None
related to issue [#9379](https://github.com/zitadel/zitadel/issues/9379)
# Which Problems Are Solved
Copy to clipboard button was not compatible with Webkit/ Firefox
browsers.
# How the Problems Are Solved
The previous function used addEventListener without a callback function
as a second argument. I simply added the callback function and left
existing code intact to fix the bug.
# Additional Changes
Added `type=button` to prevent submitting the form when clicking the
button.
# Additional Context
none
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
The login v1 allowed to use JWTs as IdP using the JWT IDP. The login V2
uses idp intents for such cases, which were not yet able to handle JWT
IdPs.
# How the Problems Are Solved
- Added handling of JWT IdPs in `StartIdPIntent` and `RetrieveIdPIntent`
- The redirect returned by the start, uses the existing `authRequestID`
and `userAgentID` parameter names for compatibility reasons.
- Added `/idps/jwt` endpoint to handle the proxied (callback) endpoint ,
which extracts and validates the JWT against the configured endpoint.
# Additional Changes
None
# Additional Context
- closes#9758
# Which Problems Are Solved
Users who started the invitation code verification, but haven't set up
any authentication method, need to be able to do so. This might require
a new invitation code, which was currently not possible since creation
was prevented for users with verified emails.
# How the Problems Are Solved
- Allow creation of invitation emails for users with verified emails.
- Merged the creation and resend into a single method, defaulting the
urlTemplate, applicatioName and authRequestID from the previous code (if
one exists). On the user service API, the `ResendInviteCode` endpoint
has been deprecated in favor of the `CreateInviteCode`
# Additional Changes
None
# Additional Context
- Noticed while investigating something internally.
- requires backport to 2.x and 3.x
# Which Problems Are Solved
the mapping of `ListUsers` was wrong for user states.
# How the Problems Are Solved
mapping of user state introduced to correctly map it
# Additional Changes
mapping of user type introduced to prevent same issue
# Additional Context
Requires backport to 2.x and 3.x
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Currently if a user signs in using an IdP, once they sign out of
Zitadel, the corresponding IdP session is not terminated. This can be
the desired behavior. In some cases, e.g. when using a shared computer
it results in a potential security risk, since a follower user might be
able to sign in as the previous using the still open IdP session.
# How the Problems Are Solved
- Admins can enabled a federated logout option on SAML IdPs through the
Admin and Management APIs.
- During the termination of a login V1 session using OIDC end_session
endpoint, Zitadel will check if an IdP was used to authenticate that
session.
- In case there was a SAML IdP used with Federated Logout enabled, it
will intercept the logout process, store the information into the shared
cache and redirect to the federated logout endpoint in the V1 login.
- The V1 login federated logout endpoint checks every request on an
existing cache entry. On success it will create a SAML logout request
for the used IdP and either redirect or POST to the configured SLO
endpoint. The cache entry is updated with a `redirected` state.
- A SLO endpoint is added to the `/idp` handlers, which will handle the
SAML logout responses. At the moment it will check again for an existing
federated logout entry (with state `redirected`) in the cache. On
success, the user is redirected to the initially provided
`post_logout_redirect_uri` from the end_session request.
# Additional Changes
None
# Additional Context
- This PR merges the https://github.com/zitadel/zitadel/pull/9841 and
https://github.com/zitadel/zitadel/pull/9854 to main, additionally
updating the docs on Entra ID SAML.
- closes#9228
- backport to 3.x
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
Co-authored-by: Zach Hirschtritt <zachary.hirschtritt@klaviyo.com>
# Which Problems Are Solved
Resource management of projects and sub-resources was before limited by
the context provided by the management API, which would mean you could
only manage resources belonging to a specific organization.
# How the Problems Are Solved
With the addition of a resource-based API, it is now possible to manage
projects and sub-resources on the basis of the resources themselves,
which means that as long as you have the permission for the resource,
you can create, read, update and delete it.
- CreateProject to create a project under an organization
- UpdateProject to update an existing project
- DeleteProject to delete an existing project
- DeactivateProject and ActivateProject to change the status of a
project
- GetProject to query for a specific project with an identifier
- ListProject to query for projects and granted projects
- CreateProjectGrant to create a project grant with project and granted
organization
- UpdateProjectGrant to update the roles of a project grant
- DeactivateProjectGrant and ActivateProjectGrant to change the status
of a project grant
- DeleteProjectGrant to delete an existing project grant
- ListProjectGrants to query for project grants
- AddProjectRole to add a role to an existing project
- UpdateProjectRole to change texts of an existing role
- RemoveProjectRole to remove an existing role
- ListProjectRoles to query for project roles
# Additional Changes
- Changes to ListProjects, which now contains granted projects as well
- Changes to messages as defined in the
[API_DESIGN](https://github.com/zitadel/zitadel/blob/main/API_DESIGN.md)
- Permission checks for project functionality on query and command side
- Added testing to unit tests on command side
- Change update endpoints to no error returns if nothing changes in the
resource
- Changed all integration test utility to the new service
- ListProjects now also correctly lists `granted projects`
- Permission checks for project grant and project role functionality on
query and command side
- Change existing pre checks so that they also work resource specific
without resourceowner
- Added the resourceowner to the grant and role if no resourceowner is
provided
- Corrected import tests with project grants and roles
- Added testing to unit tests on command side
- Change update endpoints to no error returns if nothing changes in the
resource
- Changed all integration test utility to the new service
- Corrected some naming in the proto files to adhere to the API_DESIGN
# Additional Context
Closes#9177
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
- It is not possible to specify a custom organization ID when creating
an organization. According to
https://github.com/zitadel/zitadel/discussions/9202#discussioncomment-11929464
this is "an inconsistency in the V2 API".
# How the Problems Are Solved
- Adds the `org_id` as an optional parameter to the
`AddOrganizationRequest` in the `v2beta` API.
# Additional Changes
None.
# Additional Context
- Discussion
[#9202](https://github.com/zitadel/zitadel/discussions/9202)
- I was mostly interested in how much work it'd be to add this field.
Then after completing this, I thought I'd submit this PR. I won't be
angry if you just close this PR with the reasoning "we didn't ask for
it". 😄
- Even though I don't think this is a breaking change, I didn't add this
to the `v2` API yet (don't know what the process for this is TBH). The
changes should be analogous, so if you want me to, just request it.
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
# Which Problems Are Solved
These changes introduce resource-based API endpoints for managing
instances and custom domains.
There are 4 types of changes:
- Endpoint implementation: consisting of the protobuf interface and the
implementation of the endpoint. E.g:
606439a172
- (Integration) Tests: testing the implemented endpoint. E.g:
cdfe1f0372
- Fixes: Bugs found during development that are being fixed. E.g:
acbbeedd32
- Miscellaneous: code needed to put everything together or that doesn't
fit any of the above categories. E.g:
529df92abc or
6802cb5468
# How the Problems Are Solved
_Ticked checkboxes indicate that the functionality is complete_
- [x] Instance
- [x] Create endpoint
- [x] Create endpoint tests
- [x] Update endpoint
- [x] Update endpoint tests
- [x] Get endpoint
- [x] Get endpoint tests
- [x] Delete endpoint
- [x] Delete endpoint tests
- [x] Custom Domains
- [x] Add custom domain
- [x] Add custom domain tests
- [x] Remove custom domain
- [x] Remove custom domain tests
- [x] List custom domains
- [x] List custom domains tests
- [x] Trusted Domains
- [x] Add trusted domain
- [x] Add trusted domain tests
- [x] Remove trusted domain
- [x] Remove trusted domain tests
- [x] List trusted domains
- [x] List trusted domains tests
# Additional Changes
When looking for instances (through the `ListInstances` endpoint)
matching a given query, if you ask for the results to be order by a
specific column, the query will fail due to a syntax error. This is
fixed in acbbeedd32 . Further explanation
can be found in the commit message
# Additional Context
- Relates to #9452
- CreateInstance has been excluded:
https://github.com/zitadel/zitadel/issues/9930
- Permission checks / instance retrieval (middleware) needs to be
changed to allow context based permission checks
(https://github.com/zitadel/zitadel/issues/9929), required for
ListInstances
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
If an IdP has the `automatic creation` option enabled without the
`account creation allowed (manually)` and does not provide all the
information required (given name, family name, ...) the wrong error
message was presented to the user.
# How the Problems Are Solved
Prevent overwrite of the error when rendering the error in the
`renderExternalNotFoundOption` function.
# Additional Changes
none
# Additional Context
- closes#9766
- requires backport to 2.x and 3.x
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
# Which Problems Are Solved
List organization integration test fails sometimes due to incorrect
sorting of results.
# How the Problems Are Solved
Add sorting column to request on list organizations endpoint and sort
expected results.
# Additional Changes
None
# Additional Context
None
# Which Problems Are Solved
When retrieving the information of an IdP intent, depending on the IdP
type (e.g. Apple), there was issue when mapping the stored (event)
information back to the specific IdP type, potentially leading to a
panic.
# How the Problems Are Solved
- Correctly initialize the user struct to map the information to.
# Additional Changes
none
# Additional Context
- reported by a support request
- needs backport to 3.x and 2.x
# Which Problems Are Solved
- Allow users to use SHA-256 and SHA-512 hashing algorithms. These
algorithms are used by Linux's crypt(3) function.
- Allow users to import passwords using the PHPass algorithm. This
algorithm is used by older PHP systems, WordPress in particular.
# How the Problems Are Solved
- Upgrade passwap to
[v0.9.0](https://github.com/zitadel/passwap/releases/tag/v0.9.0)
- Add sha2 and phpass as a new verifier option in defaults.yaml
# Additional Changes
- Updated docs to explain the two algorithms
# Additional Context
Implements the changes in the passwap library from
https://github.com/zitadel/passwap/pull/59 and
https://github.com/zitadel/passwap/pull/60
# Which Problems Are Solved
LDAP userfilters are joined, but as it not handled as a list of filters
but as a string they are not or-joined.
# How the Problems Are Solved
Separate userfilters as list of filters and join them correctly with
"or" condition.
# Additional Changes
None
# Additional Context
Closes#7003
---------
Co-authored-by: Marco A. <kwbmm1990@gmail.com>
# Which Problems Are Solved
When users are removed, their auth factors stay in the projection. This
data inconsistency is visible if a removed user is recreated with the
same ID. In such a case, the login UI and the query API methods show the
removed users auth methods. This is unexpected behavior.
The old users auth methods are not usable to log in and they are not
found by the command side. This is expected behavior.
# How the Problems Are Solved
The auth factors projection reduces the user removed event by deleting
all factors.
# Additional Context
- Reported by support request
- requires backport to 2.x and 3.x
# Which Problems Are Solved
We saw high CPU usage if many events were created on the database. This
was caused by the new actions which query for all event types and
aggregate types.
# How the Problems Are Solved
- the handler of action execution does not filter for aggregate and
event types.
- the index for `instance_id` and `position` is reenabled.
# Additional Changes
none
# Additional Context
none
# Which Problems Are Solved
In rare cases there was a possibility that multiple users were found by
a loginname. This prevented the corresponding user to sign in.
# How the Problems Are Solved
Fixed the corresponding query (to correctly respect the org domain
policy).
# Additional Changes
None
# Additional Context
Found during the investigation of a support request
# Which Problems Are Solved
Currently, users can't delete themselves using the V2 RemoveUser API
because of the redunant API middleware permission check.
On main, using a machine user PAT to delete the same machine user:
```bash
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"userId": "318838604669387137"}' localhost:8080 zitadel.user.v2.UserService.DeleteUser
ERROR:
Code: NotFound
Message: membership not found (AUTHZ-cdgFk)
Details:
1) {
"@type": "type.googleapis.com/zitadel.v1.ErrorDetail",
"id": "AUTHZ-cdgFk",
"message": "membership not found"
}
```
Same on this PRs branch:
```bash
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"userId": "318838604669387137"}' localhost:8080 zitadel.user.v2.UserService.DeleteUser
{
"details": {
"sequence": "3",
"changeDate": "2025-05-06T13:44:54.349048Z",
"resourceOwner": "318838541083804033"
}
}
```
Repeated call
```bash
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"userId": "318838604669387137"}' localhost:8080 zitadel.user.v2.UserService.DeleteUser
ERROR:
Code: Unauthenticated
Message: Errors.Token.Invalid (AUTH-7fs1e)
Details:
1) {
"@type": "type.googleapis.com/zitadel.v1.ErrorDetail",
"id": "AUTH-7fs1e",
"message": "Errors.Token.Invalid"
}
```
# How the Problems Are Solved
The middleware permission check is disabled and the
domain.PermissionCheck is used exclusively.
# Additional Changes
A new type command.PermissionCheck allows to optionally accept a
permission check for commands, so APIs with middleware permission checks
can omit redundant permission checks by passing nil while APIs without
middleware permission checks can pass one to the command.
# Additional Context
This is a subtask of #9763
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
When a user changes their password, Zitadel needs to terminate all of
that user's active sessions. This query can take many seconds on
deployments with large session and user tables. This happens as part of
session projection handling, so doesn't directly impact user experience,
but potentially bogs down the projection handler which isn't great. In
the future, this index could be used to power a "see all of my current
sessions" feature in Zitadel.
# How the Problems Are Solved
Adds new index on `user_id` column on `projections.sessions8` table.
Alternatively, we can index on `(instance_id, user_id)` instead but
opted for keeping the index smaller as we already index on `instance_id`
separately.
# Additional Changes
None
# Additional Context
None
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
# Which Problems Are Solved
The sorting column of action targets and executions defaults to the ID
column instead of the creation date column.
This is only relevant, if the sorting column is explicitly passed as
unspecified.
If the sorting column is not passed, it correctly defaults to the
creation date.
```bash
# ❌ Sorts by ID
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"sortingColumn": "TARGET_FIELD_NAME_UNSPECIFIED"}' localhost:8080 zitadel.action.v2beta.ActionService.ListTargets
# ❌ Sorts by ID
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"sortingColumn": 0}' localhost:8080 zitadel.action.v2beta.ActionService.ListTargets
# ✅ Sorts by creation date
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" localhost:8080 zitadel.action.v2beta.ActionService.ListTargets
```
# How the Problems Are Solved
`action.TargetFieldName_TARGET_FIELD_NAME_UNSPECIFIED` maps to the
sorting column `query.TargetColumnCreationDate`.
# Additional Context
As IDs are also generated in ascending, like creation dates, the the bug
probably only causes unexpected behavior for cases, where the ID is
specified during target or execution creation. This is currently not
supported, so this bug probably has no impact at all. It doesn't need to
be backported.
Found during implementation of #9763
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
In Actions v2, if a target is removed, which is still used in an
execution, the target is still listed when list executions.
# How the Problems Are Solved
Removed targets are now also removed from the executions.
# Additional Changes
To be sure the list executions include a check if the target is still
existing.
# Additional Context
None
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Users from Google IDP's are not unmarshalled correctly in intent
endpoints and not returned to callers.
# How the Problems Are Solved
Provided correct type for unmarshalling of the information.
# Additional Changes
None
# Additional Context
None
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Instance that had improved performance flags set, got event errors when
getting instance features. This is because the improved performance
flags were marshalled using the enumerated integers, but now needed to
be unmashalled using the added UnmarshallText method.
# How the Problems Are Solved
- Remove emnumer generation
# Additional Changes
- none
# Additional Context
- reported on QA
- Backport to next-rc / v3
# Which Problems Are Solved
The `auth.auth_requests` table is not cleaned up so long running Zitadel
installations can contain many rows.
The mirror command can take long because a the data are first copied
into memory (or disk) on cockroach and users do not get any output from
mirror. This is unfortunate because people don't know if Zitadel got
stuck.
# How the Problems Are Solved
Enhance logging throughout the projection processes and introduce a
configuration option for the maximum age of authentication requests.
# Additional Changes
None
# Additional Context
closes https://github.com/zitadel/zitadel/issues/9764
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Webkeys were not generated with new instances when the webkey feature
flag was enabled for instance defaults. This would cause a redirect loop
with console for new instances on QA / coud.
# How the Problems Are Solved
- uncomment the webkeys section on defaults.yaml
- Fix field naming of webkey config
# Additional Changes
- Add all available features as comments.
- Make the improved performance type enum parsable from the config,
untill now they were just ints.
- Running of the enumer command created missing enum entries for feature
keys.
# Additional Context
- Needs to be back-ported to v3 / next-rc
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Actions v2 is not a feature flag anymore, include functionality on
executions is not used and json tags of proto messages are handled
incorrectly.
# How the Problems Are Solved
- Remove actions from the feature flags on system and instance level
- Remove include type on executions, only in the API, later maybe in the
handling logic as well
- Use protojson in request and response handling of actions v2
# Additional Changes
- Correct integration tests for request and response handling
- Use json.RawMessage for events, so that the event payload is not
base64 encoded
- Added separate context for async webhook calls, that executions are
not cancelled when called async
# Additional Context
Related to #9759Closes#9710
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
# Which Problems Are Solved
A customer reached out that after an upgrade, actions would always fail
with the error "host is denied" when calling an external API.
This is due to a security fix
(https://github.com/zitadel/zitadel/security/advisories/GHSA-6cf5-w9h3-4rqv),
where a DNS lookup was added to check whether the host name resolves to
a denied IP or subnet.
If the lookup fails due to the internal DNS setup, the action fails as
well. Additionally, the lookup was also performed when the deny list was
empty.
# How the Problems Are Solved
- Prevent DNS lookup when deny list is empty
- Properly initiate deny list and prevent empty entries
# Additional Changes
- Log the reason for blocked address (domain, IP, subnet)
# Additional Context
- reported by a customer
- needs backport to 2.70.x, 2.71.x and 3.0.0 rc
# Which Problems Are Solved
Add the possibility to filter project resources based on project member
roles.
# How the Problems Are Solved
Extend and refactor existing Pl/PgSQL functions to implement the
following:
- Solve O(n) complexity in returned resources IDs by returning a boolean
filter for instance level permissions.
- Individually permitted orgs are returned only if there was no instance
permission
- Individually permitted projects are returned only if there was no
instance permission
- Because of the multiple filter terms, use `INNER JOIN`s instead of
`WHERE` clauses.
# Additional Changes
- system permission function no longer query the organization view and
therefore can be `immutable`, giving big performance benefits for
frequently reused system users. (like our hosted login in Zitadel cloud)
- The permitted org and project functions are now defined as `stable`
because the don't modify on-disk data. This might give a small
performance gain
- The Pl/PgSQL functions are now tested using Go unit tests.
# Additional Context
- Depends on https://github.com/zitadel/zitadel/pull/9677
- Part of https://github.com/zitadel/zitadel/issues/9188
- Closes https://github.com/zitadel/zitadel/issues/9190
# Which Problems Are Solved
Classic permission checks execute for every returned row on resource
based search APIs. Complete background and problem definition can be
found here: https://github.com/zitadel/zitadel/issues/9188
# How the Problems Are Solved
- PermissionClause function now support dynamic query building, so it
supports multiple cases.
- PermissionClause is applied to all list resources which support org
level permissions.
- Wrap permission logic into wrapper functions so we keep the business
logic clean.
# Additional Changes
- Handle org ID optimization in the query package, so it is reusable for
all resources, instead of extracting the filter in the API.
- Cleanup and test system user conversion in the authz package. (context
middleware)
- Fix: `core_integration_db_up` make recipe was missing the postgres
service.
# Additional Context
- Related to https://github.com/zitadel/zitadel/issues/9190
# Which Problems Are Solved
We found some paths in the login UI, where requests without any
`AuthRequest` were not handled correctly and could potentially panic.
This also includes providing the `AuthRequest` as part of `ctx` object
in actions V1.
# How the Problems Are Solved
- Check for the existance of an `AuthRequest` were needed and return an
error otherwise.
- Provide correct state of the `AuthRequest` for actions V1
# Additional Changes
None
# Additional Context
- Noticed as part of a support request
- requires backport to at least 2.70.x
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
This pull request improves the scalability of the session API by
enhancing middleware tracing and refining SQL query behavior for user
authentication methods.
# Which Problems Are Solved
- Eventstore subscriptions locked each other during they wrote the
events to the event channels of the subscribers in push.
- `ListUserAuthMethodTypesRequired` query used `Bitmap heap scan` to
join the tables needed.
- The auth and oidc package triggered projections often when data were
read.
- The session API triggered the user projection each time a user was
searched to write the user check command.
# How the Problems Are Solved
- the `sync.Mutex` was replaced with `sync.RWMutex` to allow parallel
read of the map
- The query was refactored to use index scans only
- if the data should already be up-to-date `shouldTriggerBulk` is set to
false
- as the user should already exist for some time the trigger was
removed.
# Additional Changes
- refactoring of `tracing#Span.End` calls
# Additional Context
- part of https://github.com/zitadel/zitadel/issues/9239
---------
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
# Which Problems Are Solved
With current provided telemetry it's difficult to predict when a
projection handler is under increased load until it's too late and
causes downstream issues. Importantly, projection updating is in the
critical path for many login flows and increased latency there can
result in system downtime for users.
# How the Problems Are Solved
This PR adds three new prometheus-style metrics:
1. **projection_events_processed** (_labels: projection, success_) -
This metric gives us a counter of the number of events processed per
projection update run and whether they we're processed without error. A
high number of events being processed can let us know how busy a
particular projection handler is.
2. **projection_handle_timer** _(labels: projection)_ - This is the time
it takes to process a projection update given a batch of events - time
to take the current_states lock, query for new events, reduce,
update_the projection, and update current_states.
3. **projection_state_latency** _(labels: projection)_ - This is the
time from the last event processed in the current_states table for a
given projection. It tells us how old was the last event you processed?
Or, how far behind are you running for this projection? Higher latencies
could mean high load or stalled projection handling.
# Additional Changes
I also had to initialize the global otel metrics provider (`metrics.M`)
in the `setup` step additionally to `start` since projection handlers
are initialized at setup. The initialization checks if a metrics
provider is already set (in case of `start-from-setup` or
`start-from-init` to prevent overwriting, which causes the otel metrics
provider to stop working.
# Additional Context
## Example Dashboards
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
When using implicit flow through the session API and a login UI on a
custom domain (proxy), the tokens were signed by the API domain of the
instance, rather than the public (proxy) domain.
The SAML response had the same issue. Additionally, the saml library had
an issue and lost the issuer context. This prevented also a successful
login through the hosted login UI.
# How the Problems Are Solved
- The issuer of the SAML and Auth request is persisted to provide the
information when signing the responses and tokens.
- The SAML library is updated to the latest version.
# Additional Changes
None
# Additional Context
None
# Which Problems Are Solved
It was not possible to use the `api.v1.appendUserGrant` function in the
`postCreation` trigger action as documented.
# How the Problems Are Solved
- Correctly initialize the javascript / Goja function
- Added `projectID` and `projectGrantID` (as documented), but kept
`projectId` and `projectGrantId` (for backwards compatibility) when
mapping the object in the `appendUserGrant` function
# Additional Changes
None
# Additional Context
- A customer reached out to support regarding this issue.
- requires back port to 2.70.x
# Which Problems Are Solved
When we recently changed some permission for the `SYSTEM_OWNER` role on
QA, we noticed that there we multiple `permission.added` even when we
removed specific permissions.
# How the Problems Are Solved
Fixed the event type when removing permissions.
# Additional Changes
None
# Additional Context
Noticed when rolling out some changes on QA
# Which Problems Are Solved
Outdated dependencies foir packages developed by Zitadel.
Some of them included important security updates from sub-dependencies.
# How the Problems Are Solved
Upgrade all packages under `github.com/zitadel/*` to the latest released
version.
# Additional Changes
- The `github.com/superseriousbusiness/exifremove` was removed from
Github. We copied the cached go mod code to
https://github.com/zitadel/exifremove and use this module now.
# Additional Context
- Related to https://github.com/zitadel/zitadel/issues/9422
- Closes https://github.com/zitadel/zitadel/issues/9443
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Allow verification of imported salted passwords hashed with plain md5.
# How the Problems Are Solved
- Upgrade passwap to
[v0.7.0](https://github.com/zitadel/passwap/releases/tag/v0.7.0)
- Add md5salted as a new verifier option in `defaults.yaml`
# Additional Changes
- go version and libraries updated (required by passkey v0.7.0)
- secrets.md verifiers updated
- configuration verifiers updated
- added MD5salted and missing MD5Plain to test cases
# Which Problems Are Solved
The service name is hardcoded in the metrics code. Making the service
name to be configurable helps when running multiple instances of
Zitadel.
The defaults remain unchanged, the service name will be defaulted to
ZITADEL.
# How the Problems Are Solved
Add a config option to override the name in defaults.yaml and pass it
down to the corresponding metrics or tracing module (google or otel)
# Additional Changes
NA
# Additional Context
NA
# Which Problems Are Solved
- Refresh Tokens issued by third party authentication providers are lost
# How the Problems Are Solved
- Allows the existing post authentication action to capture the refresh
token
# Additional Changes
- Docs updated to reflect the new property
# Additional Context
- Partially addresses #7851 by allowing the refresh token to be
captured.
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
# Which Problems Are Solved
The milestones query returns multiple results for every milestone for
every instance domain.
# How the Problems Are Solved
Corrected where condition on milestone query.
# Additional Changes
None
# Additional Context
None
Co-authored-by: Livio Spring <livio.a@gmail.com>
