# Which Problems Are Solved
Users who started the invitation code verification, but haven't set up
any authentication method, need to be able to do so. This might require
a new invitation code, which was currently not possible since creation
was prevented for users with verified emails.
# How the Problems Are Solved
- Allow creation of invitation emails for users with verified emails.
- Merged the creation and resend into a single method, defaulting the
urlTemplate, applicatioName and authRequestID from the previous code (if
one exists). On the user service API, the `ResendInviteCode` endpoint
has been deprecated in favor of the `CreateInviteCode`
# Additional Changes
None
# Additional Context
- Noticed while investigating something internally.
- requires backport to 2.x and 3.x
# Which Problems Are Solved
the mapping of `ListUsers` was wrong for user states.
# How the Problems Are Solved
mapping of user state introduced to correctly map it
# Additional Changes
mapping of user type introduced to prevent same issue
# Additional Context
Requires backport to 2.x and 3.x
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Currently if a user signs in using an IdP, once they sign out of
Zitadel, the corresponding IdP session is not terminated. This can be
the desired behavior. In some cases, e.g. when using a shared computer
it results in a potential security risk, since a follower user might be
able to sign in as the previous using the still open IdP session.
# How the Problems Are Solved
- Admins can enabled a federated logout option on SAML IdPs through the
Admin and Management APIs.
- During the termination of a login V1 session using OIDC end_session
endpoint, Zitadel will check if an IdP was used to authenticate that
session.
- In case there was a SAML IdP used with Federated Logout enabled, it
will intercept the logout process, store the information into the shared
cache and redirect to the federated logout endpoint in the V1 login.
- The V1 login federated logout endpoint checks every request on an
existing cache entry. On success it will create a SAML logout request
for the used IdP and either redirect or POST to the configured SLO
endpoint. The cache entry is updated with a `redirected` state.
- A SLO endpoint is added to the `/idp` handlers, which will handle the
SAML logout responses. At the moment it will check again for an existing
federated logout entry (with state `redirected`) in the cache. On
success, the user is redirected to the initially provided
`post_logout_redirect_uri` from the end_session request.
# Additional Changes
None
# Additional Context
- This PR merges the https://github.com/zitadel/zitadel/pull/9841 and
https://github.com/zitadel/zitadel/pull/9854 to main, additionally
updating the docs on Entra ID SAML.
- closes#9228
- backport to 3.x
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
Co-authored-by: Zach Hirschtritt <zachary.hirschtritt@klaviyo.com>
(cherry picked from commit 2cf3ef4de4)
# Which Problems Are Solved
Currently if a user signs in using an IdP, once they sign out of
Zitadel, the corresponding IdP session is not terminated. This can be
the desired behavior. In some cases, e.g. when using a shared computer
it results in a potential security risk, since a follower user might be
able to sign in as the previous using the still open IdP session.
# How the Problems Are Solved
- Admins can enabled a federated logout option on SAML IdPs through the
Admin and Management APIs.
- During the termination of a login V1 session using OIDC end_session
endpoint, Zitadel will check if an IdP was used to authenticate that
session.
- In case there was a SAML IdP used with Federated Logout enabled, it
will intercept the logout process, store the information into the shared
cache and redirect to the federated logout endpoint in the V1 login.
- The V1 login federated logout endpoint checks every request on an
existing cache entry. On success it will create a SAML logout request
for the used IdP and either redirect or POST to the configured SLO
endpoint. The cache entry is updated with a `redirected` state.
- A SLO endpoint is added to the `/idp` handlers, which will handle the
SAML logout responses. At the moment it will check again for an existing
federated logout entry (with state `redirected`) in the cache. On
success, the user is redirected to the initially provided
`post_logout_redirect_uri` from the end_session request.
# Additional Changes
None
# Additional Context
- This PR merges the https://github.com/zitadel/zitadel/pull/9841 and
https://github.com/zitadel/zitadel/pull/9854 to main, additionally
updating the docs on Entra ID SAML.
- closes#9228
- backport to 3.x
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
Co-authored-by: Zach Hirschtritt <zachary.hirschtritt@klaviyo.com>
# Which Problems Are Solved
Resource management of projects and sub-resources was before limited by
the context provided by the management API, which would mean you could
only manage resources belonging to a specific organization.
# How the Problems Are Solved
With the addition of a resource-based API, it is now possible to manage
projects and sub-resources on the basis of the resources themselves,
which means that as long as you have the permission for the resource,
you can create, read, update and delete it.
- CreateProject to create a project under an organization
- UpdateProject to update an existing project
- DeleteProject to delete an existing project
- DeactivateProject and ActivateProject to change the status of a
project
- GetProject to query for a specific project with an identifier
- ListProject to query for projects and granted projects
- CreateProjectGrant to create a project grant with project and granted
organization
- UpdateProjectGrant to update the roles of a project grant
- DeactivateProjectGrant and ActivateProjectGrant to change the status
of a project grant
- DeleteProjectGrant to delete an existing project grant
- ListProjectGrants to query for project grants
- AddProjectRole to add a role to an existing project
- UpdateProjectRole to change texts of an existing role
- RemoveProjectRole to remove an existing role
- ListProjectRoles to query for project roles
# Additional Changes
- Changes to ListProjects, which now contains granted projects as well
- Changes to messages as defined in the
[API_DESIGN](https://github.com/zitadel/zitadel/blob/main/API_DESIGN.md)
- Permission checks for project functionality on query and command side
- Added testing to unit tests on command side
- Change update endpoints to no error returns if nothing changes in the
resource
- Changed all integration test utility to the new service
- ListProjects now also correctly lists `granted projects`
- Permission checks for project grant and project role functionality on
query and command side
- Change existing pre checks so that they also work resource specific
without resourceowner
- Added the resourceowner to the grant and role if no resourceowner is
provided
- Corrected import tests with project grants and roles
- Added testing to unit tests on command side
- Change update endpoints to no error returns if nothing changes in the
resource
- Changed all integration test utility to the new service
- Corrected some naming in the proto files to adhere to the API_DESIGN
# Additional Context
Closes#9177
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
- Allow users to use SHA-256 and SHA-512 hashing algorithms. These
algorithms are used by Linux's crypt(3) function.
- Allow users to import passwords using the PHPass algorithm. This
algorithm is used by older PHP systems, WordPress in particular.
# How the Problems Are Solved
- Upgrade passwap to
[v0.9.0](https://github.com/zitadel/passwap/releases/tag/v0.9.0)
- Add sha2 and phpass as a new verifier option in defaults.yaml
# Additional Changes
- Updated docs to explain the two algorithms
# Additional Context
Implements the changes in the passwap library from
https://github.com/zitadel/passwap/pull/59 and
https://github.com/zitadel/passwap/pull/60
(cherry picked from commit 38013d0e84)
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
# Which Problems Are Solved
Replace this example text with a concise list of problems that this PR
solves.
- Organization list lacked the ability to filter by organization ID
- No efficient method was provided for users to search organizations by
ID
# How the Problems Are Solved
Replace this example text with a concise list of changes that this PR
introduces.
- Added organization ID filtering functionality to
`filter-org.component.ts`
- Added `ID` to the `SubQuery` enum
- Added `ID` case handling to `changeCheckbox`, `setValue`, and
`getSubFilter` methods
- Added ID filter UI to `filter-org.component.html`
- Added checkbox and text input field
- Used translation key to display "Organization ID" label
- Added new translation key to translation file (`en.json`)
- Added `FILTER.ORGID` key with "Organization ID" value
# Additional Changes
Replace this example text with a concise list of additional changes that
this PR introduces, that are not directly solving the initial problem
but are related.
- Maintained consistency with existing filtering functionality
- Ensured intuitive user interface usability
- Added new key while maintaining translation file structure
# Additional Context
Replace this example with links to related issues, discussions, discord
threads, or other sources with more context.
Use the Closing #issue syntax for issues that are resolved with this PR.
- Closes#8792
- Discussion #xxx
- Follow-up for PR #xxx
- https://discord.com/channels/xxx/xxx
---------
Co-authored-by: Marco A. <kwbmm1990@gmail.com>
(cherry picked from commit 28856015d6)
# Which Problems Are Solved
If an IdP has the `automatic creation` option enabled without the
`account creation allowed (manually)` and does not provide all the
information required (given name, family name, ...) the wrong error
message was presented to the user.
# How the Problems Are Solved
Prevent overwrite of the error when rendering the error in the
`renderExternalNotFoundOption` function.
# Additional Changes
none
# Additional Context
- closes#9766
- requires backport to 2.x and 3.x
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
(cherry picked from commit a73acbcfc3)
# Which Problems Are Solved
List organization integration test fails sometimes due to incorrect
sorting of results.
# How the Problems Are Solved
Add sorting column to request on list organizations endpoint and sort
expected results.
# Additional Changes
None
# Additional Context
None
(cherry picked from commit 6b07e57e5c)
# Which Problems Are Solved
When retrieving the information of an IdP intent, depending on the IdP
type (e.g. Apple), there was issue when mapping the stored (event)
information back to the specific IdP type, potentially leading to a
panic.
# How the Problems Are Solved
- Correctly initialize the user struct to map the information to.
# Additional Changes
none
# Additional Context
- reported by a support request
- needs backport to 3.x and 2.x
(cherry picked from commit 1b2fd23e0b)
# Which Problems Are Solved
LDAP userfilters are joined, but as it not handled as a list of filters
but as a string they are not or-joined.
# How the Problems Are Solved
Separate userfilters as list of filters and join them correctly with
"or" condition.
# Additional Changes
None
# Additional Context
Closes#7003
---------
Co-authored-by: Marco A. <kwbmm1990@gmail.com>
(cherry picked from commit 1383cb0702)
# Which Problems Are Solved
When users are removed, their auth factors stay in the projection. This
data inconsistency is visible if a removed user is recreated with the
same ID. In such a case, the login UI and the query API methods show the
removed users auth methods. This is unexpected behavior.
The old users auth methods are not usable to log in and they are not
found by the command side. This is expected behavior.
# How the Problems Are Solved
The auth factors projection reduces the user removed event by deleting
all factors.
# Additional Context
- Reported by support request
- requires backport to 2.x and 3.x
(cherry picked from commit d79d5e7b96)
# Which Problems Are Solved
- It is not possible to specify a custom organization ID when creating
an organization. According to
https://github.com/zitadel/zitadel/discussions/9202#discussioncomment-11929464
this is "an inconsistency in the V2 API".
# How the Problems Are Solved
- Adds the `org_id` as an optional parameter to the
`AddOrganizationRequest` in the `v2beta` API.
# Additional Changes
None.
# Additional Context
- Discussion
[#9202](https://github.com/zitadel/zitadel/discussions/9202)
- I was mostly interested in how much work it'd be to add this field.
Then after completing this, I thought I'd submit this PR. I won't be
angry if you just close this PR with the reasoning "we didn't ask for
it". 😄
- Even though I don't think this is a breaking change, I didn't add this
to the `v2` API yet (don't know what the process for this is TBH). The
changes should be analogous, so if you want me to, just request it.
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
# Which Problems Are Solved
These changes introduce resource-based API endpoints for managing
instances and custom domains.
There are 4 types of changes:
- Endpoint implementation: consisting of the protobuf interface and the
implementation of the endpoint. E.g:
606439a172
- (Integration) Tests: testing the implemented endpoint. E.g:
cdfe1f0372
- Fixes: Bugs found during development that are being fixed. E.g:
acbbeedd32
- Miscellaneous: code needed to put everything together or that doesn't
fit any of the above categories. E.g:
529df92abc or
6802cb5468
# How the Problems Are Solved
_Ticked checkboxes indicate that the functionality is complete_
- [x] Instance
- [x] Create endpoint
- [x] Create endpoint tests
- [x] Update endpoint
- [x] Update endpoint tests
- [x] Get endpoint
- [x] Get endpoint tests
- [x] Delete endpoint
- [x] Delete endpoint tests
- [x] Custom Domains
- [x] Add custom domain
- [x] Add custom domain tests
- [x] Remove custom domain
- [x] Remove custom domain tests
- [x] List custom domains
- [x] List custom domains tests
- [x] Trusted Domains
- [x] Add trusted domain
- [x] Add trusted domain tests
- [x] Remove trusted domain
- [x] Remove trusted domain tests
- [x] List trusted domains
- [x] List trusted domains tests
# Additional Changes
When looking for instances (through the `ListInstances` endpoint)
matching a given query, if you ask for the results to be order by a
specific column, the query will fail due to a syntax error. This is
fixed in acbbeedd32 . Further explanation
can be found in the commit message
# Additional Context
- Relates to #9452
- CreateInstance has been excluded:
https://github.com/zitadel/zitadel/issues/9930
- Permission checks / instance retrieval (middleware) needs to be
changed to allow context based permission checks
(https://github.com/zitadel/zitadel/issues/9929), required for
ListInstances
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
If an IdP has the `automatic creation` option enabled without the
`account creation allowed (manually)` and does not provide all the
information required (given name, family name, ...) the wrong error
message was presented to the user.
# How the Problems Are Solved
Prevent overwrite of the error when rendering the error in the
`renderExternalNotFoundOption` function.
# Additional Changes
none
# Additional Context
- closes#9766
- requires backport to 2.x and 3.x
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
# Which Problems Are Solved
We have no standard way of deprecating API methods.
# How the Problems Are Solved
The API_DESIGN.md contains a section that describes how to deprecate
APIs.
Most importantly, deprecated APIs should link to replacement APIs for
good UX.
# Additional Context
- [x] Discussed with @stebenz during review of
https://github.com/zitadel/zitadel/pull/9743#discussion_r2081736144
- [ ] Inform backend engineers when this is merged.
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
# Which Problems Are Solved
This PR aims to clarify how to use the zitadel SDK with OAuth token
introspection.
# How the Problems Are Solved
Reworked the setup process on console needed to create the JSON key and
a PAT.
# Additional Changes
- Closes#5559
# Which Problems Are Solved
List organization integration test fails sometimes due to incorrect
sorting of results.
# How the Problems Are Solved
Add sorting column to request on list organizations endpoint and sort
expected results.
# Additional Changes
None
# Additional Context
None
# Which Problems Are Solved
When retrieving the information of an IdP intent, depending on the IdP
type (e.g. Apple), there was issue when mapping the stored (event)
information back to the specific IdP type, potentially leading to a
panic.
# How the Problems Are Solved
- Correctly initialize the user struct to map the information to.
# Additional Changes
none
# Additional Context
- reported by a support request
- needs backport to 3.x and 2.x
# Which Problems Are Solved
- Allow users to use SHA-256 and SHA-512 hashing algorithms. These
algorithms are used by Linux's crypt(3) function.
- Allow users to import passwords using the PHPass algorithm. This
algorithm is used by older PHP systems, WordPress in particular.
# How the Problems Are Solved
- Upgrade passwap to
[v0.9.0](https://github.com/zitadel/passwap/releases/tag/v0.9.0)
- Add sha2 and phpass as a new verifier option in defaults.yaml
# Additional Changes
- Updated docs to explain the two algorithms
# Additional Context
Implements the changes in the passwap library from
https://github.com/zitadel/passwap/pull/59 and
https://github.com/zitadel/passwap/pull/60
# Which Problems Are Solved
LDAP userfilters are joined, but as it not handled as a list of filters
but as a string they are not or-joined.
# How the Problems Are Solved
Separate userfilters as list of filters and join them correctly with
"or" condition.
# Additional Changes
None
# Additional Context
Closes#7003
---------
Co-authored-by: Marco A. <kwbmm1990@gmail.com>
# Which Problems Are Solved
When users are removed, their auth factors stay in the projection. This
data inconsistency is visible if a removed user is recreated with the
same ID. In such a case, the login UI and the query API methods show the
removed users auth methods. This is unexpected behavior.
The old users auth methods are not usable to log in and they are not
found by the command side. This is expected behavior.
# How the Problems Are Solved
The auth factors projection reduces the user removed event by deleting
all factors.
# Additional Context
- Reported by support request
- requires backport to 2.x and 3.x
<!--
Please inform yourself about the contribution guidelines on submitting a
PR here:
https://github.com/zitadel/zitadel/blob/main/CONTRIBUTING.md#submit-a-pull-request-pr.
Take note of how PR/commit titles should be written and replace the
template texts in the sections below. Don't remove any of the sections.
It is important that the commit history clearly shows what is changed
and why.
Important: By submitting a contribution you agree to the terms from our
Licensing Policy as described here:
https://github.com/zitadel/zitadel/blob/main/LICENSING.md#community-contributions.
-->
# Which Problems Are Solved
Replace this example text with a concise list of problems that this PR
solves.
- Organization list lacked the ability to filter by organization ID
- No efficient method was provided for users to search organizations by
ID
# How the Problems Are Solved
Replace this example text with a concise list of changes that this PR
introduces.
- Added organization ID filtering functionality to
`filter-org.component.ts`
- Added `ID` to the `SubQuery` enum
- Added `ID` case handling to `changeCheckbox`, `setValue`, and
`getSubFilter` methods
- Added ID filter UI to `filter-org.component.html`
- Added checkbox and text input field
- Used translation key to display "Organization ID" label
- Added new translation key to translation file (`en.json`)
- Added `FILTER.ORGID` key with "Organization ID" value
# Additional Changes
Replace this example text with a concise list of additional changes that
this PR introduces, that are not directly solving the initial problem
but are related.
- Maintained consistency with existing filtering functionality
- Ensured intuitive user interface usability
- Added new key while maintaining translation file structure
# Additional Context
Replace this example with links to related issues, discussions, discord
threads, or other sources with more context.
Use the Closing #issue syntax for issues that are resolved with this PR.
- Closes#8792
- Discussion #xxx
- Follow-up for PR #xxx
- https://discord.com/channels/xxx/xxx
---------
Co-authored-by: Marco A. <kwbmm1990@gmail.com>
# Which Problems Are Solved
We saw high CPU usage if many events were created on the database. This
was caused by the new actions which query for all event types and
aggregate types.
# How the Problems Are Solved
- the handler of action execution does not filter for aggregate and
event types.
- the index for `instance_id` and `position` is reenabled.
# Additional Changes
none
# Additional Context
none
(cherry picked from commit 60ce32ca4f)
# Which Problems Are Solved
We saw high CPU usage if many events were created on the database. This
was caused by the new actions which query for all event types and
aggregate types.
# How the Problems Are Solved
- the handler of action execution does not filter for aggregate and
event types.
- the index for `instance_id` and `position` is reenabled.
# Additional Changes
none
# Additional Context
none
# Which Problems Are Solved
In rare cases there was a possibility that multiple users were found by
a loginname. This prevented the corresponding user to sign in.
# How the Problems Are Solved
Fixed the corresponding query (to correctly respect the org domain
policy).
# Additional Changes
None
# Additional Context
Found during the investigation of a support request
(cherry picked from commit 867e9cb15a)
# Which Problems Are Solved
In rare cases there was a possibility that multiple users were found by
a loginname. This prevented the corresponding user to sign in.
# How the Problems Are Solved
Fixed the corresponding query (to correctly respect the org domain
policy).
# Additional Changes
None
# Additional Context
Found during the investigation of a support request
# Which Problems Are Solved
#9837 added a new index `es_instance_position` on the events table with
the idea to improve performance for some projections. Unfortunately, it
makes it worse for almost all projections and would only improve the
situation for the events handler of the actions V2 subscriptions.
# How the Problems Are Solved
Remove the index again.
# Additional Changes
None
# Additional Context
relates to #9837
relates to #9863
(cherry picked from commit d71795c433)
# Which Problems Are Solved
#9837 added a new index `es_instance_position` on the events table with
the idea to improve performance for some projections. Unfortunately, it
makes it worse for almost all projections and would only improve the
situation for the events handler of the actions V2 subscriptions.
# How the Problems Are Solved
Remove the index again.
# Additional Changes
None
# Additional Context
relates to #9837
relates to #9863
We are bringing our DPA and privacy policy document in line with our
changes to the corporate structure, changes to subprocessors, and new
cookie technologies.
This PR replaces #3055 which included more changes to terms of service.
The changes to terms of service will follow in a second step.
---------
Co-authored-by: Florian Forster <florian@zitadel.com>
# Which Problems Are Solved
The execution handler projection handles all events to check if an
execution has to be provided to the worker to execute.
In this logic all events would be processed from the beginning which is
not necessary.
# How the Problems Are Solved
Add the current state to the execution handler projection, to avoid
processing all existing events.
# Additional Changes
Add custom configuration to the default, so that the transactions are
limited to some events.
# Additional Context
None
(cherry picked from commit 21167a4bba)
# Which Problems Are Solved
When a user changes their password, Zitadel needs to terminate all of
that user's active sessions. This query can take many seconds on
deployments with large session and user tables. This happens as part of
session projection handling, so doesn't directly impact user experience,
but potentially bogs down the projection handler which isn't great. In
the future, this index could be used to power a "see all of my current
sessions" feature in Zitadel.
# How the Problems Are Solved
Adds new index on `user_id` column on `projections.sessions8` table.
Alternatively, we can index on `(instance_id, user_id)` instead but
opted for keeping the index smaller as we already index on `instance_id`
separately.
# Additional Changes
None
# Additional Context
None
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
(cherry picked from commit 8cb1d24b36)
# Which Problems Are Solved
The execution handler projection handles all events to check if an
execution has to be provided to the worker to execute.
In this logic all events would be processed from the beginning which is
not necessary.
# How the Problems Are Solved
Add the current state to the execution handler projection, to avoid
processing all existing events.
# Additional Changes
Add custom configuration to the default, so that the transactions are
limited to some events.
# Additional Context
None
# Which Problems Are Solved
Misleading information on member endpoint requests.
# How the Problems Are Solved
Add comment to member endpoint requests that the request is invalid if
no roles are provided.
# Additional Changes
None
# Additional Context
Closes#9415
Co-authored-by: Fabienne Bühler <fabienne@zitadel.com>
# Which Problems Are Solved
Currently, users can't delete themselves using the V2 RemoveUser API
because of the redunant API middleware permission check.
On main, using a machine user PAT to delete the same machine user:
```bash
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"userId": "318838604669387137"}' localhost:8080 zitadel.user.v2.UserService.DeleteUser
ERROR:
Code: NotFound
Message: membership not found (AUTHZ-cdgFk)
Details:
1) {
"@type": "type.googleapis.com/zitadel.v1.ErrorDetail",
"id": "AUTHZ-cdgFk",
"message": "membership not found"
}
```
Same on this PRs branch:
```bash
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"userId": "318838604669387137"}' localhost:8080 zitadel.user.v2.UserService.DeleteUser
{
"details": {
"sequence": "3",
"changeDate": "2025-05-06T13:44:54.349048Z",
"resourceOwner": "318838541083804033"
}
}
```
Repeated call
```bash
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"userId": "318838604669387137"}' localhost:8080 zitadel.user.v2.UserService.DeleteUser
ERROR:
Code: Unauthenticated
Message: Errors.Token.Invalid (AUTH-7fs1e)
Details:
1) {
"@type": "type.googleapis.com/zitadel.v1.ErrorDetail",
"id": "AUTH-7fs1e",
"message": "Errors.Token.Invalid"
}
```
# How the Problems Are Solved
The middleware permission check is disabled and the
domain.PermissionCheck is used exclusively.
# Additional Changes
A new type command.PermissionCheck allows to optionally accept a
permission check for commands, so APIs with middleware permission checks
can omit redundant permission checks by passing nil while APIs without
middleware permission checks can pass one to the command.
# Additional Context
This is a subtask of #9763
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
There were some misunderstandings on how different points would be
needed to be applied into existing API definitions.
# How the Problems Are Solved
- Added structure to the API design
- Added points to context information in requests and responses
- Added examples to responses with context information
- Corrected available pagination messages
- Added pagination and filter examples
# Additional Changes
None
# Additional Context
None
# Which Problems Are Solved
When a user changes their password, Zitadel needs to terminate all of
that user's active sessions. This query can take many seconds on
deployments with large session and user tables. This happens as part of
session projection handling, so doesn't directly impact user experience,
but potentially bogs down the projection handler which isn't great. In
the future, this index could be used to power a "see all of my current
sessions" feature in Zitadel.
# How the Problems Are Solved
Adds new index on `user_id` column on `projections.sessions8` table.
Alternatively, we can index on `(instance_id, user_id)` instead but
opted for keeping the index smaller as we already index on `instance_id`
separately.
# Additional Changes
None
# Additional Context
None
---------
Co-authored-by: Silvan <27845747+adlerhurst@users.noreply.github.com>
# Which Problems Are Solved
Step 54 was not executed during setup.
# How the Problems Are Solved
Added the step to setup jobs
# Additional Changes
none
# Additional Context
- the step was added in https://github.com/zitadel/zitadel/pull/9837
- thanks to @zhirschtritt for raising this.
(cherry picked from commit a626678004)
# Which Problems Are Solved
Step 54 was not executed during setup.
# How the Problems Are Solved
Added the step to setup jobs
# Additional Changes
none
# Additional Context
- the step was added in https://github.com/zitadel/zitadel/pull/9837
- thanks to @zhirschtritt for raising this.
# Which Problems Are Solved
Some projection queries took a long time to run. It seems that 1 or more
queries couldn't make proper use of the `es_projection` index. This
might be because of a specific complexity aggregate_type and event_type
arguments, making the index unfeasible for postgres.
# How the Problems Are Solved
Following the index recommendation, add and index that covers just
instance_id and position.
# Additional Changes
- none
# Additional Context
- Related to https://github.com/zitadel/zitadel/issues/9832
(cherry picked from commit bb56b362a7)
# Which Problems Are Solved
The sorting column of action targets and executions defaults to the ID
column instead of the creation date column.
This is only relevant, if the sorting column is explicitly passed as
unspecified.
If the sorting column is not passed, it correctly defaults to the
creation date.
```bash
# ❌ Sorts by ID
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"sortingColumn": "TARGET_FIELD_NAME_UNSPECIFIED"}' localhost:8080 zitadel.action.v2beta.ActionService.ListTargets
# ❌ Sorts by ID
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" -d '{"sortingColumn": 0}' localhost:8080 zitadel.action.v2beta.ActionService.ListTargets
# ✅ Sorts by creation date
grpcurl -plaintext -H "Authorization: Bearer ${ZITADEL_ACCESS_TOKEN}" localhost:8080 zitadel.action.v2beta.ActionService.ListTargets
```
# How the Problems Are Solved
`action.TargetFieldName_TARGET_FIELD_NAME_UNSPECIFIED` maps to the
sorting column `query.TargetColumnCreationDate`.
# Additional Context
As IDs are also generated in ascending, like creation dates, the the bug
probably only causes unexpected behavior for cases, where the ID is
specified during target or execution creation. This is currently not
supported, so this bug probably has no impact at all. It doesn't need to
be backported.
Found during implementation of #9763
Co-authored-by: Livio Spring <livio.a@gmail.com>
(cherry picked from commit 74ace1aec3)
# Which Problems Are Solved
Some projection queries took a long time to run. It seems that 1 or more
queries couldn't make proper use of the `es_projection` index. This
might be because of a specific complexity aggregate_type and event_type
arguments, making the index unfeasible for postgres.
# How the Problems Are Solved
Following the index recommendation, add and index that covers just
instance_id and position.
# Additional Changes
- none
# Additional Context
- Related to https://github.com/zitadel/zitadel/issues/9832
