# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes#8931
# Which Problems Are Solved
Currently ZITADEL supports RP-initiated logout for clients. Back-channel
logout ensures that user sessions are terminated across all connected
applications, even if the user closes their browser or loses
connectivity providing a more secure alternative for certain use cases.
# How the Problems Are Solved
If the feature is activated and the client used for the authentication
has a back_channel_logout_uri configured, a
`session_logout.back_channel` will be registered. Once a user terminates
their session, a (notification) handler will send a SET (form POST) to
the registered uri containing a logout_token (with the user's ID and
session ID).
- A new feature "back_channel_logout" is added on system and instance
level
- A `back_channel_logout_uri` can be managed on OIDC applications
- Added a `session_logout` aggregate to register and inform about sent
`back_channel` notifications
- Added a `SecurityEventToken` channel and `Form`message type in the
notification handlers
- Added `TriggeredAtOrigin` fields to `HumanSignedOut` and
`TerminateSession` events for notification handling
- Exported various functions and types in the `oidc` package to be able
to reuse for token signing in the back_channel notifier.
- To prevent that current existing session termination events will be
handled, a setup step is added to set the `current_states` for the
`projections.notifications_back_channel_logout` to the current position
- [x] requires https://github.com/zitadel/oidc/pull/671
# Additional Changes
- Updated all OTEL dependencies to v1.29.0, since OIDC already updated
some of them to that version.
- Single Session Termination feature is correctly checked (fixed feature
mapping)
# Additional Context
- closes https://github.com/zitadel/zitadel/issues/8467
- TODO:
- Documentation
- UI to be done: https://github.com/zitadel/zitadel/issues/8469
---------
Co-authored-by: Hidde Wieringa <hidde@hiddewieringa.nl>
- **docs: s/Secondfactor/Second factor/**
- **docs: s/IDP/IdP/**
- **docs: s/Hardwaretokens/Hardware tokens/**
- **docs: standardize multi-factor vs multi factor vs multifactor**
# Which Problems Are Solved
- English strings are improved
# How the Problems Are Solved
- With better strings
---------
Co-authored-by: Fabi <fabienne@zitadel.com>
# Which Problems Are Solved
Twilio supports a robust, multi-channel verification service that
notably supports multi-region SMS sender numbers required for our use
case. Currently, Zitadel does much of the work of the Twilio Verify (eg.
localization, code generation, messaging) but doesn't support the pool
of sender numbers that Twilio Verify does.
# How the Problems Are Solved
To support this API, we need to be able to store the Twilio Service ID
and send that in a verification request where appropriate: phone number
verification and SMS 2FA code paths.
This PR does the following:
- Adds the ability to use Twilio Verify of standard messaging through
Twilio
- Adds support for international numbers and more reliable verification
messages sent from multiple numbers
- Adds a new Twilio configuration option to support Twilio Verify in the
admin console
- Sends verification SMS messages through Twilio Verify
- Implements Twilio Verification Checks for codes generated through the
same
# Additional Changes
# Additional Context
- base was implemented by @zhirschtritt in
https://github.com/zitadel/zitadel/pull/8268❤️
- closes https://github.com/zitadel/zitadel/issues/8581
---------
Co-authored-by: Zachary Hirschtritt <zachary.hirschtritt@klaviyo.com>
Co-authored-by: Joey Biscoglia <joey.biscoglia@klaviyo.com>
# Which Problems Are Solved
Send Email messages as a HTTP call to a relay, for own logic on handling
different Email providers
# How the Problems Are Solved
Create endpoints under Email provider to manage SMTP and HTTP in the
notification handlers.
# Additional Changes
Clean up old logic in command and query side to handle the general Email
providers with deactivate, activate and remove.
# Additional Context
Partially closes#8270
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Send SMS messages as a HTTP call to a relay, for own logic on handling
different SMS providers.
# How the Problems Are Solved
Add HTTP as SMS provider type and handling of webhook messages in the
notification handlers.
# Additional Changes
Clean up old Twilio events, which were supposed to handle the general
SMS providers with deactivate, activate and remove.
# Additional Context
Partially closes#8270
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
chore(fmt): run gci on complete project
Fix global import formatting in go code by running the `gci` command. This allows us to just use the command directly, instead of fixing the import order manually for the linter, on each PR.
Co-authored-by: Elio Bischof <elio@zitadel.com>
* feat: return 404 or 409 if org reg disallowed
* fix: system limit permissions
* feat: add iam limits api
* feat: disallow public org registrations on default instance
* add integration test
* test: integration
* fix test
* docs: describe public org registrations
* avoid updating docs deps
* fix system limits integration test
* silence integration tests
* fix linting
* ignore strange linter complaints
* review
* improve reset properties naming
* redefine the api
* use restrictions aggregate
* test query
* simplify and test projection
* test commands
* fix unit tests
* move integration test
* support restrictions on default instance
* also test GetRestrictions
* self review
* lint
* abstract away resource owner
* fix tests
* configure supported languages
* fix allowed languages
* fix tests
* default lang must not be restricted
* preferred language must be allowed
* change preferred languages
* check languages everywhere
* lint
* test command side
* lint
* add integration test
* add integration test
* restrict supported ui locales
* lint
* lint
* cleanup
* lint
* allow undefined preferred language
* fix integration tests
* update main
* fix env var
* ignore linter
* ignore linter
* improve integration test config
* reduce cognitive complexity
* compile
* check for duplicates
* remove useless restriction checks
* review
* revert restriction renaming
* fix language restrictions
* lint
* generate
* allow custom texts for supported langs for now
* fix tests
* cleanup
* cleanup
* cleanup
* lint
* unsupported preferred lang is allowed
* fix integration test
* finish reverting to old property name
* finish reverting to old property name
* load languages
* refactor(i18n): centralize translators and fs
* lint
* amplify no validations on preferred languages
* fix integration test
* lint
* fix resetting allowed languages
* test unchanged restrictions
This change adds a core_generate_all make target.
It installs the required tools and runs generate on the complete project.
`golang/mock` is no longer maintained and a fork is available
from the Uber folks. So the latter is used as tool.
All the mock files have been regenerated and are part of the PR.
The obsolete `tools` directory has been removed,
as all the tools are now part of specific make targets.
Co-authored-by: Silvan <silvan.reusser@gmail.com>
* get key by id and cache them
* userinfo from events for v2 tokens
* improve keyset caching
* concurrent token and client checks
* client and project in single query
* logging and otel
* drop owner_removed column on apps and authN tables
* userinfo and project roles in go routines
* get oidc user info from projections and add actions
* add avatar URL
* some cleanup
* pull oidc work branch
* remove storage from server
* add config flag for experimental introspection
* legacy introspection flag
* drop owner_removed column on user projections
* drop owner_removed column on useer_metadata
* query userinfo unit test
* query introspection client test
* add user_grants to the userinfo query
* handle PAT scopes
* bring triggers back
* test instance keys query
* add userinfo unit tests
* unit test keys
* go mod tidy
* solve some bugs
* fix missing preferred login name
* do not run triggers in go routines, they seem to deadlock
* initialize the trigger handlers late with a sync.OnceValue
* Revert "do not run triggers in go routines, they seem to deadlock"
This reverts commit 2a03da2127.
* add missing translations
* chore: update go version for linting
* pin oidc version
* parse a global time location for query test
* fix linter complains
* upgrade go lint
* fix more linting issues
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
This implementation increases parallel write capabilities of the eventstore.
Please have a look at the technical advisories: [05](https://zitadel.com/docs/support/advisory/a10005) and [06](https://zitadel.com/docs/support/advisory/a10006).
The implementation of eventstore.push is rewritten and stored events are migrated to a new table `eventstore.events2`.
If you are using cockroach: make sure that the database user of ZITADEL has `VIEWACTIVITY` grant. This is used to query events.
* take baseurl if saved on event
* refactor: make es mocks reusable
* Revert "refactor: make es mocks reusable"
This reverts commit 434ce12a6a.
* make messages testable
* test asset url
* fmt
* fmt
* simplify notification.Start
* test url combinations
* support init code added
* support password changed
* support reset pw
* support user domain claimed
* support add pwless login
* support verify phone
* Revert "support verify phone"
This reverts commit e40503303e.
* save trigger origin from ctx
* add ready for review check
* camel
* test email otp
* fix variable naming
* fix DefaultOTPEmailURLV2
* Revert "fix DefaultOTPEmailURLV2"
This reverts commit fa34d4d2a8.
* fix email otp challenged test
* fix email otp challenged test
* pass origin in login and gateway requests
* take origin from header
* take x-forwarded if present
* Update internal/notification/handlers/queries.go
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* Update internal/notification/handlers/commands.go
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* move origin header to ctx if available
* generate
* cleanup
* use forwarded header
* support X-Forwarded-* headers
* standardize context handling
* fix linting
---------
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
