# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes#8931
# Which Problems Are Solved
There is no option to only query auth methods related to specific
domains.
# How the Problems Are Solved
Add domain as attribute to the ListAuthenticationMethodTypes request.
# Additional Changes
OwnerRemoved column removed from the projection.
# Additional Context
Closes#8615
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
#8291 added backwards compatibilty for users who were created through
the user V2 API and want to sign in to the login UI.
There were however to issues, where users might be prompted to set a
password even if they already had one set or they would not be able to
submit the email verification code.
# How the Problems Are Solved
- Replaced `SearchUserAuthMethods `with `ListUserAuthMethodTypes` to
check for set up auth methods.
- Fixed page / javascript to disable submit button.
# Additional Changes
- Changed `ListActiveUserAuthMethodTypes ` to `ListUserAuthMethodTypes`
and a `activeOnly` boolean parameter
# Additional Context
- relates to #8291
- noticed internally on QA
# Which Problems Are Solved
User created through the User V2 API without any authentication method
and possibly unverified email address was not able to login through the
current hosted login UI.
An unverified email address would result in a mail verification and not
an initialization mail like it would with the management API. Also the
login UI would then require the user to enter the init code, which the
user never received.
# How the Problems Are Solved
- When verifying the email through the login UI, it will check for
existing auth methods (password, IdP, passkeys). In case there are none,
the user will be prompted to set a password.
- When a user was created through the V2 API with a verified email and
no auth method, the user will be prompted to set a password in the login
UI.
- Since setting a password requires a corresponding code, the code will
be generated and sent when login in.
# Additional Changes
- Changed `RequestSetPassword` to get the codeGenerator from the
eventstore instead of getting it from query.
# Additional Context
- closes https://github.com/zitadel/zitadel/issues/6600
- closes https://github.com/zitadel/zitadel/issues/8235
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
# Which Problems Are Solved
We identified some parts in the code, which could panic with a nil
pointer when accessed without auth request.
Additionally, if a GRPC method was called with an unmapped HTTP method,
e.g. POST instead of GET a 501 instead of a 405 was returned.
# How the Problems Are Solved
- Additional checks for existing authRequest
- custom http status code mapper for gateway
# Additional Changes
None.
# Additional Context
- noted internally in OPS
* feat: return 404 or 409 if org reg disallowed
* fix: system limit permissions
* feat: add iam limits api
* feat: disallow public org registrations on default instance
* add integration test
* test: integration
* fix test
* docs: describe public org registrations
* avoid updating docs deps
* fix system limits integration test
* silence integration tests
* fix linting
* ignore strange linter complaints
* review
* improve reset properties naming
* redefine the api
* use restrictions aggregate
* test query
* simplify and test projection
* test commands
* fix unit tests
* move integration test
* support restrictions on default instance
* also test GetRestrictions
* self review
* lint
* abstract away resource owner
* fix tests
* configure supported languages
* fix allowed languages
* fix tests
* default lang must not be restricted
* preferred language must be allowed
* change preferred languages
* check languages everywhere
* lint
* test command side
* lint
* add integration test
* add integration test
* restrict supported ui locales
* lint
* lint
* cleanup
* lint
* allow undefined preferred language
* fix integration tests
* update main
* fix env var
* ignore linter
* ignore linter
* improve integration test config
* reduce cognitive complexity
* compile
* check for duplicates
* remove useless restriction checks
* review
* revert restriction renaming
* fix language restrictions
* lint
* generate
* allow custom texts for supported langs for now
* fix tests
* cleanup
* cleanup
* cleanup
* lint
* unsupported preferred lang is allowed
* fix integration test
* finish reverting to old property name
* finish reverting to old property name
* load languages
* refactor(i18n): centralize translators and fs
* lint
* amplify no validations on preferred languages
* fix integration test
* lint
* fix resetting allowed languages
* test unchanged restrictions
* get key by id and cache them
* userinfo from events for v2 tokens
* improve keyset caching
* concurrent token and client checks
* client and project in single query
* logging and otel
* drop owner_removed column on apps and authN tables
* userinfo and project roles in go routines
* get oidc user info from projections and add actions
* add avatar URL
* some cleanup
* pull oidc work branch
* remove storage from server
* add config flag for experimental introspection
* legacy introspection flag
* drop owner_removed column on user projections
* drop owner_removed column on useer_metadata
* query userinfo unit test
* query introspection client test
* add user_grants to the userinfo query
* handle PAT scopes
* bring triggers back
* test instance keys query
* add userinfo unit tests
* unit test keys
* go mod tidy
* solve some bugs
* fix missing preferred login name
* do not run triggers in go routines, they seem to deadlock
* initialize the trigger handlers late with a sync.OnceValue
* Revert "do not run triggers in go routines, they seem to deadlock"
This reverts commit 2a03da2127b7dc74552ec25d4772282a82cc1cba.
* add missing translations
* chore: update go version for linting
* pin oidc version
* parse a global time location for query test
* fix linter complains
* upgrade go lint
* fix more linting issues
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* feat(command): remove org
* refactor: imports, unused code, error handling
* reduce org removed in action
* add org deletion to projections
* add org removal to projections
* add org removal to projections
* org removed projection
* lint import
* projections
* fix: table names in tests
* fix: table names in tests
* logging
* add org state
* fix(domain): add Owner removed to object details
* feat(ListQuery): add with owner removed
* fix(org-delete): add bool to functions to select with owner removed
* fix(org-delete): add bools to user grants with events to determine if dependencies lost owner
* fix(org-delete): add unit tests for owner removed and org removed events
* fix(org-delete): add handling of org remove for grants and members
* fix(org-delete): correction of unit tests for owner removed
* fix(org-delete): update projections, unit tests and get functions
* fix(org-delete): add change date to authnkeys and owner removed to org metadata
* fix(org-delete): include owner removed for login names
* fix(org-delete): some column fixes in projections and build for queries with owner removed
* indexes
* fix(org-delete): include review changes
* fix(org-delete): change user projection name after merge
* fix(org-delete): include review changes for project grant where no project owner is necessary
* fix(org-delete): include auth and adminapi tables with owner removed information
* fix(org-delete): cleanup username and orgdomain uniqueconstraints when org is removed
* fix(org-delete): add permissions for org.remove
* remove unnecessary unique constraints
* fix column order in primary keys
* fix(org-delete): include review changes
* fix(org-delete): add owner removed indexes and chang setup step to create tables
* fix(org-delete): move PK order of instance_id and change added user_grant from review
* fix(org-delete): no params for prepareUserQuery
* change to step 6
* merge main
* fix(org-delete): OldUserName rename to private
* fix linting
* cleanup
* fix: remove org test
* create prerelease
* chore: delete org-delete as prerelease
Co-authored-by: Stefan Benz <stefan@caos.ch>
Co-authored-by: Livio Spring <livio.a@gmail.com>
Co-authored-by: Fabi <38692350+hifabienne@users.noreply.github.com>
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* fix(login): translate init password correctly
* refactor: no error return params
* fix(login): custom texts for pages called directly form mail link
* fix custom text on registration pages
Co-authored-by: adlerhurst <silvan.reusser@gmail.com>
