# Which Problems Are Solved
The action v2 messages were didn't contain anything providing security
for the sent content.
# How the Problems Are Solved
Each Target now has a SigningKey, which can also be newly generated
through the API and returned at creation and through the Get-Endpoints.
There is now a HTTP header "Zitadel-Signature", which is generated with
the SigningKey and Payload, and also contains a timestamp to check with
a tolerance if the message took to long to sent.
# Additional Changes
The functionality to create and check the signature is provided in the
pkg/actions package, and can be reused in the SDK.
# Additional Context
Closes#7924
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes#8931
# Which Problems Are Solved
Do not return an access token for implicit flow from v1 login, if the
`response_type` is `id_token`
# How the Problems Are Solved
Do not create the access token event if if the `response_type` is
`id_token`.
# Additional Changes
Token endpoint calls without auth request, such as machine users, token
exchange and refresh token, do not have a `response_type`. For such
calls the `OIDCResponseTypeUnspecified` enum is added at a `-1` offset,
in order not to break existing client configs.
# Additional Context
- https://discord.com/channels/927474939156643850/1294001717725237298
- Fixes https://github.com/zitadel/zitadel/issues/8776
# Which Problems Are Solved
Currently ZITADEL supports RP-initiated logout for clients. Back-channel
logout ensures that user sessions are terminated across all connected
applications, even if the user closes their browser or loses
connectivity providing a more secure alternative for certain use cases.
# How the Problems Are Solved
If the feature is activated and the client used for the authentication
has a back_channel_logout_uri configured, a
`session_logout.back_channel` will be registered. Once a user terminates
their session, a (notification) handler will send a SET (form POST) to
the registered uri containing a logout_token (with the user's ID and
session ID).
- A new feature "back_channel_logout" is added on system and instance
level
- A `back_channel_logout_uri` can be managed on OIDC applications
- Added a `session_logout` aggregate to register and inform about sent
`back_channel` notifications
- Added a `SecurityEventToken` channel and `Form`message type in the
notification handlers
- Added `TriggeredAtOrigin` fields to `HumanSignedOut` and
`TerminateSession` events for notification handling
- Exported various functions and types in the `oidc` package to be able
to reuse for token signing in the back_channel notifier.
- To prevent that current existing session termination events will be
handled, a setup step is added to set the `current_states` for the
`projections.notifications_back_channel_logout` to the current position
- [x] requires https://github.com/zitadel/oidc/pull/671
# Additional Changes
- Updated all OTEL dependencies to v1.29.0, since OIDC already updated
some of them to that version.
- Single Session Termination feature is correctly checked (fixed feature
mapping)
# Additional Context
- closes https://github.com/zitadel/zitadel/issues/8467
- TODO:
- Documentation
- UI to be done: https://github.com/zitadel/zitadel/issues/8469
---------
Co-authored-by: Hidde Wieringa <hidde@hiddewieringa.nl>
# Which Problems Are Solved
OTP Email links currently could not use / include the sessionID they
belong to. This prevents an easy use for redirecting and handling OTP
via email through the session API.
# How the Problems Are Solved
Added the sessionID as placeholder for the OTP Email link template.
# Additional Changes
List all available placeholders in the url_templates of V2 endpoints.
# Additional Context
- discussed in a customer meeting
# Which Problems Are Solved
Calls with tokens issued through JWT Profile or Client Credentials
Grants were no longer possible and threw a "could not read projectid by
clientid (AUTH-GHpw2)" error.
ZITADEL checks the allowed origins of an application and load its
projectID into the context on any API call.
Tokens from service accounts did not contain any clientID and therefore
never did that check.
But due to a change in https://github.com/zitadel/zitadel/pull/8580,
were the service user id was set as client_id in the OIDC session to fix
the introspection response
(https://github.com/zitadel/zitadel/issues/8590).
# How the Problems Are Solved
- Check if the project and origin were retrieved and only then check the
origins
# Additional Changes
None.
# Additional Context
- closes https://github.com/zitadel/zitadel/issues/8676
- relates to https://github.com/zitadel/zitadel/pull/8580 (released on
2.62.0)
- relates to https://github.com/zitadel/zitadel/issues/8590
# Which Problems Are Solved
Twilio supports a robust, multi-channel verification service that
notably supports multi-region SMS sender numbers required for our use
case. Currently, Zitadel does much of the work of the Twilio Verify (eg.
localization, code generation, messaging) but doesn't support the pool
of sender numbers that Twilio Verify does.
# How the Problems Are Solved
To support this API, we need to be able to store the Twilio Service ID
and send that in a verification request where appropriate: phone number
verification and SMS 2FA code paths.
This PR does the following:
- Adds the ability to use Twilio Verify of standard messaging through
Twilio
- Adds support for international numbers and more reliable verification
messages sent from multiple numbers
- Adds a new Twilio configuration option to support Twilio Verify in the
admin console
- Sends verification SMS messages through Twilio Verify
- Implements Twilio Verification Checks for codes generated through the
same
# Additional Changes
# Additional Context
- base was implemented by @zhirschtritt in
https://github.com/zitadel/zitadel/pull/8268❤️
- closes https://github.com/zitadel/zitadel/issues/8581
---------
Co-authored-by: Zachary Hirschtritt <zachary.hirschtritt@klaviyo.com>
Co-authored-by: Joey Biscoglia <joey.biscoglia@klaviyo.com>
# Which Problems Are Solved
As an administrator I want to be able to invite users to my application
with the API V2, some user data I will already prefil, the user should
add the authentication method themself (password, passkey, sso).
# How the Problems Are Solved
- A user can now be created with a email explicitly set to false.
- If a user has no verified email and no authentication method, an
`InviteCode` can be created through the User V2 API.
- the code can be returned or sent through email
- additionally `URLTemplate` and an `ApplicatioName` can provided for
the email
- The code can be resent and verified through the User V2 API
- The V1 login allows users to verify and resend the code and set a
password (analog user initialization)
- The message text for the user invitation can be customized
# Additional Changes
- `verifyUserPasskeyCode` directly uses `crypto.VerifyCode` (instead of
`verifyEncryptedCode`)
- `verifyEncryptedCode` is removed (unnecessarily queried for the code
generator)
# Additional Context
- closes#8310
- TODO: login V2 will have to implement invite flow:
https://github.com/zitadel/typescript/issues/166
# Which Problems Are Solved
Add a debug API which allows pushing a set of events to be reduced in a
dedicated projection.
The events can carry a sleep duration which simulates a slow query
during projection handling.
# How the Problems Are Solved
- `CreateDebugEvents` allows pushing multiple events which simulate the
lifecycle of a resource. Each event has a `projectionSleep` field, which
issues a `pg_sleep()` statement query in the projection handler :
- Add
- Change
- Remove
- `ListDebugEventsStates` list the current state of the projection,
optionally with a Trigger
- `GetDebugEventsStateByID` get the current state of the aggregate ID in
the projection, optionally with a Trigger
# Additional Changes
- none
# Additional Context
- Allows reproduction of https://github.com/zitadel/zitadel/issues/8517
# Which Problems Are Solved
id_tokens issued for auth requests created through the login UI
currently do not provide a sid claim.
This is due to the fact that (SSO) sessions for the login UI do not have
one and are only computed by the userAgent(ID), the user(ID) and the
authentication checks of the latter.
This prevents client to track sessions and terminate specific session on
the end_session_endpoint.
# How the Problems Are Solved
- An `id` column is added to the `auth.user_sessions` table.
- The `id` (prefixed with `V1_`) is set whenever a session is added or
updated to active (from terminated)
- The id is passed to the `oidc session` (as v2 sessionIDs), to expose
it as `sid` claim
# Additional Changes
- refactored `getUpdateCols` to handle different column value types and
add arguments for query
# Additional Context
- closes#8499
- relates to #8501
# Which Problems Are Solved
Added functionality that user with a userschema can be created and
removed.
# How the Problems Are Solved
Added logic and moved APIs so that everything is API v3 conform.
# Additional Changes
- move of user and userschema API to resources folder
- changed testing and parameters
- some renaming
# Additional Context
closes#7308
---------
Co-authored-by: Elio Bischof <elio@zitadel.com>
# Which Problems Are Solved
There were UX issue with the autolinking prompt page and users were not
able to link their account or would not understand what to do. Since the
trust to the IdP is already bound by the configuration, the user can
directly be linked without any user input.
# How the Problems Are Solved
- remove the prompt page and directly link the user if possible
- remove corresponding customization texts from the API and Console
# Additional Changes
None
# Additional Context
- relates to https://github.com/zitadel/zitadel/issues/7977
- discussed with customers
- created as a `fix` to be able to backport
---------
Co-authored-by: Max Peintner <max@caos.ch>
# Which Problems Are Solved
Org v2 service does not have a ListOrganizations endpoint.
# How the Problems Are Solved
Implement ListOrganizations endpoint.
# Additional Changes
- moved descriptions in the protos to comments
- corrected the RemoveNoPermissions for the ListUsers, to get the
correct TotalResults
# Additional Context
For new typescript login
# Which Problems Are Solved
GetIDPByID as endpoint in the API v2 so that it can be available for the
new login.
# How the Problems Are Solved
Create GetIDPByID endpoint with IDP v2 API, throught the GetProviderByID
implementation from admin and management API.
# Additional Changes
- Remove the OwnerType attribute from the response, as the information
is available through the resourceOwner.
- correct refs to messages in proto which are used for doc generation
- renaming of elements for API v3
# Additional Context
Closes#8337
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Implement a new API service that allows management of OIDC signing web
keys.
This allows users to manage rotation of the instance level keys. which
are currently managed based on expiry.
The API accepts the generation of the following key types and
parameters:
- RSA keys with 2048, 3072 or 4096 bit in size and:
- Signing with SHA-256 (RS256)
- Signing with SHA-384 (RS384)
- Signing with SHA-512 (RS512)
- ECDSA keys with
- P256 curve
- P384 curve
- P512 curve
- ED25519 keys
# How the Problems Are Solved
Keys are serialized for storage using the JSON web key format from the
`jose` library. This is the format that will be used by OIDC for
signing, verification and publication.
Each instance can have a number of key pairs. All existing public keys
are meant to be used for token verification and publication the keys
endpoint. Keys can be activated and the active private key is meant to
sign new tokens. There is always exactly 1 active signing key:
1. When the first key for an instance is generated, it is automatically
activated.
2. Activation of the next key automatically deactivates the previously
active key.
3. Keys cannot be manually deactivated from the API
4. Active keys cannot be deleted
# Additional Changes
- Query methods that later will be used by the OIDC package are already
implemented. Preparation for #8031
- Fix indentation in french translation for instance event
- Move user_schema translations to consistent positions in all
translation files
# Additional Context
- Closes#8030
- Part of #7809
---------
Co-authored-by: Elio Bischof <elio@zitadel.com>
# Which Problems Are Solved
Log some details when a secret generator is not found.
This should help us debugging such issue.
# How the Problems Are Solved
When a secret generator by type query fails,
we log the generator type and instance id for which
the generator was requested.
# Additional Changes
- none
# Additional Context
- Related to https://github.com/zitadel/zitadel/issues/8379
- Also encountered in https://github.com/zitadel/zitadel/pull/8407
# Which Problems Are Solved
The current v3alpha actions APIs don't exactly adhere to the [new
resources API
design](https://zitadel.com/docs/apis/v3#standard-resources).
# How the Problems Are Solved
- **Improved ID access**: The aggregate ID is added to the resource
details object, so accessing resource IDs and constructing proto
messages for resources is easier
- **Explicit Instances**: Optionally, the instance can be explicitly
given in each request
- **Pagination**: A default search limit and a max search limit are
added to the defaults.yaml. They apply to the new v3 APIs (currently
only actions). The search query defaults are changed to ascending by
creation date, because this makes the pagination results the most
deterministic. The creation date is also added to the object details.
The bug with updated creation dates is fixed for executions and targets.
- **Removed Sequences**: Removed Sequence from object details and
ProcessedSequence from search details
# Additional Changes
Object details IDs are checked in unit test only if an empty ID is
expected. Centralizing the details check also makes this internal object
more flexible for future evolutions.
# Additional Context
- Closes#8169
- Depends on https://github.com/zitadel/zitadel/pull/8225
---------
Co-authored-by: Silvan <silvan.reusser@gmail.com>
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
# Which Problems Are Solved
We noticed logging where 500: Internal Server errors were returned from
the token endpoint, mostly for the `refresh_token` grant. The error was
thrown by the database as it received non-UTF8 strings for token IDs
Zitadel uses symmetric encryption for opaque tokens, including refresh
tokens. Encrypted values are base64 encoded. It appeared to be possible
to send garbage base64 to the token endpoint, which will pass decryption
and string-splitting. In those cases the resulting ID is not a valid
UTF-8 string.
Invalid non-UTF8 strings are now rejected during token decryption.
# How the Problems Are Solved
- `AESCrypto.DecryptString()` checks if the decrypted bytes only contain
valid UTF-8 characters before converting them into a string.
- `AESCrypto.Decrypt()` is unmodified and still allows decryption on
non-UTF8 byte strings.
- `FromRefreshToken` now uses `DecryptString` instead of `Decrypt`
# Additional Changes
- Unit tests added for `FromRefreshToken` and
`AESCrypto.DecryptString()`.
- Fuzz tests added for `FromRefreshToken` and
`AESCrypto.DecryptString()`. This was to pinpoint the problem
- Testdata with values that resulted in invalid strings are committed.
In the pipeline this results in the Fuzz tests to execute as regular
unit-test cases. As we don't use the `-fuzz` flag in the pipeline no
further fuzzing is performed.
# Additional Context
- Closes#7765
- https://go.dev/doc/tutorial/fuzz
# Which Problems Are Solved
User created through the User V2 API without any authentication method
and possibly unverified email address was not able to login through the
current hosted login UI.
An unverified email address would result in a mail verification and not
an initialization mail like it would with the management API. Also the
login UI would then require the user to enter the init code, which the
user never received.
# How the Problems Are Solved
- When verifying the email through the login UI, it will check for
existing auth methods (password, IdP, passkeys). In case there are none,
the user will be prompted to set a password.
- When a user was created through the V2 API with a verified email and
no auth method, the user will be prompted to set a password in the login
UI.
- Since setting a password requires a corresponding code, the code will
be generated and sent when login in.
# Additional Changes
- Changed `RequestSetPassword` to get the codeGenerator from the
eventstore instead of getting it from query.
# Additional Context
- closes https://github.com/zitadel/zitadel/issues/6600
- closes https://github.com/zitadel/zitadel/issues/8235
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
# Which Problems Are Solved
Imporve the performance of user grant addition, especially for import.
# How the Problems Are Solved
Use the search table to query for the project grant state.
This could easily be done by making the search used in
`checkProjectGrantPreCondition` reusable.
# Additional Changes
Chanded event declerations to `const` in the
`internal/repository/project` package.
# Additional Context
- Performance improvements for import are evaluated and acted upon
internally at the moment
---------
Co-authored-by: adlerhurst <silvan.reusser@gmail.com>
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
The client ID for OIDC applications has an `@` in it, which is not
allowed in some 3rd-party systems (such as AWS).
# How the Problems Are Solved
Per @fforootd and @hifabienne in #6222, remove the project suffix and
the `@` from the client ID and just use the generated ID.
# Additional Changes
N/A
# Additional Context
- Closes#6222
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
To improve performance a new table and method is implemented on
eventstore. The goal of this table is to index searchable fields on
command side to use it on command and query side.
The table allows to store one primitive value (numeric, text) per row.
The eventstore framework is extended by the `Search`-method which allows
to search for objects.
The `Command`-interface is extended by the `SearchOperations()`-method
which does manipulate the the `search`-table.
# How the Problems Are Solved
This PR adds the capability of improving performance for command and
query side by using the `Search`-method of the eventstore instead of
using one of the `Filter`-methods.
# Open Tasks
- [x] Add feature flag
- [x] Unit tests
- [ ] ~~Benchmarks if needed~~
- [x] Ensure no behavior change
- [x] Add setup step to fill table with current data
- [x] Add projection which ensures data added between setup and start of
the new version are also added to the table
# Additional Changes
The `Search`-method is currently used by `ProjectGrant`-command side.
# Additional Context
- Closes https://github.com/zitadel/zitadel/issues/8094
# Which Problems Are Solved
When we switched to V2 tokens (#7822), the user agent was incorrectly
set for sessions created though the login UI.
Additionally, when calling the ListMyUserSessions from the AuthService,
any session without the fingerprint ID (e.g. created through the session
API) would be listed.
# How the Problems Are Solved
- Use the intended ID of the user agent (fingerprint)
- Ignore empty user agent IDs when listing the user sessions
# Additional Changes
None.
# Additional Context
- relates #7822
- closes#8213
# Which Problems Are Solved
This fix adds tracing spans to all V1 API import related functions. This
is to troubleshoot import related performance issues reported to us.
# How the Problems Are Solved
Add a tracing span to `api/grpc/admin/import.go` and all related
functions that are called in the `command` package.
# Additional Changes
- none
# Additional Context
- Reported by internal communication
# Which Problems Are Solved
Some organizations / customers have the requirement, that there users
regularly need to change their password.
ZITADEL already had the possibility to manage a `password age policy` (
thought the API) with the maximum amount of days a password should be
valid, resp. days after with the user should be warned of the upcoming
expiration.
The policy could not be managed though the Console UI and was not
checked in the Login UI.
# How the Problems Are Solved
- The policy can be managed in the Console UI's settings sections on an
instance and organization level.
- During an authentication in the Login UI, if a policy is set with an
expiry (>0) and the user's last password change exceeds the amount of
days set, the user will be prompted to change their password.
- The prompt message of the Login UI can be customized in the Custom
Login Texts though the Console and API on the instance and each
organization.
- The information when the user last changed their password is returned
in the Auth, Management and User V2 API.
- The policy can be retrieved in the settings service as `password
expiry settings`.
# Additional Changes
None.
# Additional Context
- closes#8081
---------
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
# Which Problems Are Solved
Zitadel never stored or returned the requested `response_mode` in oidc
Auth Requests. This caused the oidc library to fallback to the default
based on the response_type.
# How the Problems Are Solved
- Store the `response_mode` in the Auth request repo
- Store the `response_mode` in the Auth request v2 events
- Return the `resonse_mode` from the Auth Request v1 and v2
`ResponseMode()` methods. (Was hard-coded to an empty string)
# Additional Changes
- Populate the `response_modes_supported` to the oidc Discovery
Configuration. When it was empty, the standard specifies the default of
`query` and `fragment`. However, our oidc library also supports
`form_post` and by this fix, zitadel now also supports this.
# Additional Context
- Closes#6586
- Reported
https://discord.com/channels/927474939156643850/1151508313717084220
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
An admin / application might want to be able to reduce the amount of
roles returned in the token, for example if a user is granted to many
organizations or for specific cases where the application want to narrow
down the access for that token to a specific organization or multiple.
This can now be achieved by providing a scope with the id of the
organization, resp. multiple scopes for every organization, which should
be included.
```
urn:zitadel:iam:org:roles🆔{orgID}
```
**Note:** the new scope does not work when Introspection / Userinfo are
set to legacy mode.
# How the Problems Are Solved
The user info query now has two variants:
1. Variant that returns all organization authorization grants if the new
scope wasn't provided for backward compatibility.
2. Variant that filters the organizations based on the IDs passed in one
or more of the above scopes and returns only those authorization grants.
The query is defined as a `text/template` and both variants are rendered
once in package `init()`.
# Additional Changes
- In the integration tests `assertProjectRoleClaims` now also checks the
org IDs in the roles.
# Additional Context
- Closes#7996
# Which Problems Are Solved
As already mentioned and (partially) fixed in #7992 we discovered,
issues with v2 tokens that where obtained through an IDP, with
passwordless authentication or with password authentication (wihtout any
2FA set up) using the v1 login for zitadel API calls
- (Previous) authentication through an IdP is now correctly treated as
auth method in case of a reauth even when the user is not redirected to
the IdP
- There were some cases where passwordless authentication was
successfully checked but not correctly set as auth method, which denied
access to ZITADEL API
- Users with password and passwordless, but no 2FA set up which
authenticate just wich password can access the ZITADEL API again
Additionally while testing we found out that because of #7969 the login
UI could completely break / block with the following error:
`sql: Scan error on column index 3, name "state": converting NULL to
int32 is unsupported (Internal)`
# How the Problems Are Solved
- IdP checks are treated the same way as other factors and it's ensured
that a succeeded check within the configured timeframe will always
provide the idp auth method
- `MFATypesAllowed` checks for possible passwordless authentication
- As with the v1 login, the token check now only requires MFA if the
policy is set or the user has 2FA set up
- UserAuthMethodsRequirements now always uses the correctly policy to
check for MFA enforcement
- `State` column is handled as nullable and additional events set the
state to active (as before #7969)
# Additional Changes
- Console now also checks for 403 (mfa required) errors (e.g. after
setting up the first 2FA in console) and redirects the user to the login
UI (with the current id_token as id_token_hint)
- Possible duplicates in auth methods / AMRs are removed now as well.
# Additional Context
- Bugs were introduced in #7822 and # and 7969 and only part of a
pre-release.
- partially already fixed with #7992
- Reported internally.
# Which Problems Are Solved
After https://github.com/zitadel/zitadel/pull/7822 was merged we
discovered that
v2 tokens that where obtained through an IDP using the v1 login, can't
be used for
zitadel API calls.
- Because we used to store the AMR claim on the auth request, but
internally use the domain.UserAuthMethod type. AMR has no notion of an
IDP login, so that "factor" was lost
during conversion. Rendering those v2 tokens invalid on the zitadel API.
- A wrong check on machine user tokens falsly allowed some tokens to be
valid
- The client ID was set to tokens from client credentials and JWT
profile, which made client queries fail in the validation middleware.
The middleware expects client ID unset for machine users.
# How the Problems Are Solved
Store the domain.AuthMethods directly in the auth requests and session,
instead of using AMR claims with lossy conversion.
- IDPs have seperate auth method, which is not an AMR claim
- Machine users are treated specialy, eg auth methods are not required.
- Do not set the client ID for client credentials and JWT profile
# Additional Changes
Cleaned up mostly unused `oidc.getInfoFromRequest()`.
# Additional Context
- Bugs were introduced in https://github.com/zitadel/zitadel/pull/7822
and not yet part of a release.
- Reported internally.
# Which Problems Are Solved
ZITADEL currently always uses
`urn:oasis:names:tc:SAML:2.0:nameid-format:persistent` in SAML requests,
relying on the IdP to respect that flag and always return a peristent
nameid in order to be able to map the external user with an existing
user (idp link) in ZITADEL.
In case the IdP however returns a
`urn:oasis:names:tc:SAML:2.0:nameid-format:transient` (transient)
nameid, the attribute will differ between each request and it will not
be possible to match existing users.
# How the Problems Are Solved
This PR adds the following two options on SAML IdP:
- **nameIDFormat**: allows to set the nameid-format used in the SAML
Request
- **transientMappingAttributeName**: allows to set an attribute name,
which will be used instead of the nameid itself in case the returned
nameid-format is transient
# Additional Changes
To reduce impact on current installations, the `idp_templates6_saml`
table is altered with the two added columns by a setup job. New
installations will automatically get the table with the two columns
directly.
All idp unit tests are updated to use `expectEventstore` instead of the
deprecated `eventstoreExpect`.
# Additional Context
Closes#7483Closes#7743
---------
Co-authored-by: peintnermax <max@caos.ch>
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* implement code exchange
* port tokenexchange to v2 tokens
* implement refresh token
* implement client credentials
* implement jwt profile
* implement device token
* cleanup unused code
* fix current unit tests
* add user agent unit test
* unit test domain package
* need refresh token as argument
* test commands create oidc session
* test commands device auth
* fix device auth build error
* implicit for oidc session API
* implement authorize callback handler for legacy implicit mode
* upgrade oidc module to working draft
* add missing auth methods and time
* handle all errors in defer
* do not fail auth request on error
the oauth2 Go client automagically retries on any error. If we fail the auth request on the first error, the next attempt will always fail with the Errors.AuthRequest.NoCode, because the auth request state is already set to failed.
The original error is then already lost and the oauth2 library does not return the original error.
Therefore we should not fail the auth request.
Might be worth discussing and perhaps send a bug report to Oauth2?
* fix code flow tests by explicitly setting code exchanged
* fix unit tests in command package
* return allowed scope from client credential client
* add device auth done reducer
* carry nonce thru session into ID token
* fix token exchange integration tests
* allow project role scope prefix in client credentials client
* gci formatting
* do not return refresh token in client credentials and jwt profile
* check org scope
* solve linting issue on authorize callback error
* end session based on v2 session ID
* use preferred language and user agent ID for v2 access tokens
* pin oidc v3.23.2
* add integration test for jwt profile and client credentials with org scopes
* refresh token v1 to v2
* add user token v2 audit event
* add activity trigger
* cleanup and set panics for unused methods
* use the encrypted code for v1 auth request get by code
* add missing event translation
* fix pipeline errors (hopefully)
* fix another test
* revert pointer usage of preferred language
* solve browser info panic in device auth
* remove duplicate entries in AMRToAuthMethodTypes to prevent future `mfa` claim
* revoke v1 refresh token to prevent reuse
* fix terminate oidc session
* always return a new refresh toke in refresh token grant
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
* fix: import totp in add human user with secret
* fix: import totp in add human user with secret
* fix: import totp in add human user with secret
* fix: review comment changes
* feat: smtp templates poc
* feat: add isActive & ProviderType to SMTP backend
* feat: change providertype to uint32 and fix tests
* feat: minimal smtp provider component
* feat: woking on diiferent providers
* feat: keep working on providers
* feat: initial stepper for new provider
* fix: settings list and working on stepper
* feat: step 1 and 2 form inputs
* feat: starter for smtp test step
* fix: misspelled SMPT
* fix: remove tests for now
* feat: add tls toggle remove old google provider
* feat: working on add smtp and table
* fix: duplicated identifiers
* fix: settings list
* fix: add missing smtp config properties
* fix: add configID to smtp config table
* fix: working on listproviders
* feat: working in listSMTPConfigs
* fix: add count to listsmtpconfigs
* fix: getting empty results from listSMTPConfigs
* feat: table now shows real data
* fix: remaining styles for smtp-table
* fix: remove old notification-smtp-provider-component
* feat: delete smtp configuration
* feat: deactivate smtp config
* feat: replace isActive with state for smtp config
* feat: activate smtp config
* fix: remaining errors after main merge
* fix: list smtp providers panic and material mdc
* feat: refactor to only one provider component
* feat: current provider details view
* fix: refactor AddSMTPConfig and ChangeSMTPConfig
* fix: smtp config reduce issue
* fix: recover domain in NewIAMSMTPConfigWriteModel
* fix: add code needed by SetUpInstance
* fix: go tests and warn about passing context to InstanceAggregateFromWriteModel
* fix: i18n and add missing trans for fr, it, zh
* fix: add e2e tests
* docs: add smtp templates
* fix: remove provider_type, add description
* fix: remaining error from merge main
* fix: add @stebenz change for primary key
* fix: inactive placed after removed to prevent deleted configs to show as inactive
* fix: smtp provider id can be empty (migrated)
* feat: add mailchimp transactional template
* feat: add Brevo (Sendinblue) template
* feat: change brevo logo, add color to tls icon
* fix: queries use resourceowner, id must not be empty
* fix: deal with old smtp settings and tests
* fix: resourceOwner is the instanceID
* fix: remove aggregate_id, rename SMTPConfigByAggregateID with SMTPConfigActive
* fix: add tests for multiple configs with different IDs
* fix: conflict
* fix: remove notification-smtp-provider
* fix: add @peintnermax suggestions, rename module and fix e2e tests
* fix: remove material legacy modules
* fix: remove ctx as parameter for InstanceAggregateFromWriteModel
* fix: add Id to SMTPConfigToPb
* fix: change InstanceAggregateFromWriteModel to avoid linter errors
* fix import
* rm unused package-lock
* update yarn lock
---------
Co-authored-by: Elio Bischof <elio@zitadel.com>
Co-authored-by: Max Peintner <max@caos.ch>
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* init auto linking
* prompt handling
* working
* translations
* console
* fixes
* unify
* custom texts
* fix tests
* linting
* fix check of existing user
* fix bg translation
* set unspecified as default in the form
* fix: add action v2 execution to features
* fix: add action v2 execution to features
* fix: add action v2 execution to features
* fix: update internal/command/instance_features_model.go
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* fix: merge back main
* fix: merge back main
* fix: rename feature and service
* fix: rename feature and service
* fix: review changes
* fix: review changes
---------
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* fix(oidc): return bad request for base64 errors
We've recently noticed an increased amount of 500: internal server error status returns on zitadel cloud.
The source of these errors appear to be erroneous input in fields that are supposed to be bas64 formatted.
```
time=2024-04-08T14:05:47.600Z level=ERROR msg="request error" oidc_error.parent="ID=OIDC-AhX2u Message=Errors.Internal Parent=(illegal base64 data at input byte 8)" oidc_error.description=Errors.Internal oidc_error.type=server_error status_code=500
```
Within the possible code paths of the token endpoint there are a couple of uses of base64.Encoding.DecodeString of which a returned error was not properly wrapped, but returned as-is.
This causes the oidc error handler to return a 500 with the `OIDC-AhX2u` ID.
We were not able to pinpoint the exact errors that are happening to any one call of `DecodeString`.
This fix wraps all errors from `DecodeString` so that proper 400: bad request is returned with information about the error. Each wrapper now has an unique error ID, so that logs will contain the source of the error as well.
This bug was reported internally by the ops team.
* catch op.ErrInvalidRefreshToken
* add token exchange feature flag
* allow setting reason and actor to access tokens
* impersonation
* set token types and scopes in response
* upgrade oidc to working draft state
* fix tests
* audience and scope validation
* id toke and jwt as input
* return id tokens
* add grant type token exchange to app config
* add integration tests
* check and deny actors in api calls
* fix instance setting tests by triggering projection on write and cleanup
* insert sleep statements again
* solve linting issues
* add translations
* pin oidc v3.15.0
* resolve comments, add event translation
* fix refreshtoken test
* use ValidateAuthReqScopes from oidc
* apparently the linter can't make up its mind
* persist actor thru refresh tokens and check in tests
* remove unneeded triggers
* feat: add projections and query side to executions and targets
* feat: add list and get endpoints for targets
* feat: add integration tests for query endpoints target and execution
* fix: linting
* fix: linting
* fix: review changes, renames and corrections
* fix: review changes, renames and corrections
* fix: review changes, renames and corrections
* fix: review changes, renames and corrections
* fix: review changes, renames and corrections
* fix: review changes, renames and corrections
* fix: remove position from list details
* feat: add ExpirationDate to MachineKey JSON detail
* fix: include time in expiration date column for machine keys table
* fix: show expiration date in ShowKeyDialog if available
* fix: add machine key expiration date note
---------
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
This PR adds the functionality to manage user schemas through the new user schema service.
It includes the possibility to create a basic JSON schema and also provides a way on defining permissions (read, write) for owner and self context with an annotation.
Further annotations for OIDC claims and SAML attribute mappings will follow.
A guide on how to create a schema and assign permissions has been started. It will be extended though out the process of implementing the schema and users based on those.
Note:
This feature is in an early stage and therefore not enabled by default. To test it out, please enable the UserSchema feature flag on your instance / system though the feature service.
* fix: if device Code is selected Auth Code no longer a hard requirement
* fix: create device code app without auth code as grant type
* fix: don't show redirect uris in overview for devicecode app wizard
* feat: reload component when oidc app is updated
* fix: oidcapp is valid grantTypes cannot be empty
* fix: auth code not mandatory if refresh token and device code combined
* feat(api): feature API proto definitions
* update proto based on discussion with @livio-a
* cleanup old feature flag stuff
* authz instance queries
* align defaults
* projection definitions
* define commands and event reducers
* implement system and instance setter APIs
* api getter implementation
* unit test repository package
* command unit tests
* unit test Get queries
* grpc converter unit tests
* migrate the V1 features
* migrate oidc to dynamic features
* projection unit test
* fix instance by host
* fix instance by id data type in sql
* fix linting errors
* add system projection test
* fix behavior inversion
* resolve proto file comments
* rename SystemDefaultLoginInstanceEventType to SystemLoginDefaultOrgEventType so it's consistent with the instance level event
* use write models and conditional set events
* system features integration tests
* instance features integration tests
* error on empty request
* documentation entry
* typo in feature.proto
* fix start unit tests
* solve linting error on key case switch
* remove system defaults after discussion with @eliobischof
* fix system feature projection
* resolve comments in defaults.yaml
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
