# Which Problems Are Solved
The current handling of notification follows the same pattern as all
other projections:
Created events are handled sequentially (based on "position") by a
handler. During the process, a lot of information is aggregated (user,
texts, templates, ...).
This leads to back pressure on the projection since the handling of
events might take longer than the time before a new event (to be
handled) is created.
# How the Problems Are Solved
- The current user notification handler creates separate notification
events based on the user / session events.
- These events contain all the present and required information
including the userID.
- These notification events get processed by notification workers, which
gather the necessary information (recipient address, texts, templates)
to send out these notifications.
- If a notification fails, a retry event is created based on the current
notification request including the current state of the user (this
prevents race conditions, where a user is changed in the meantime and
the notification already gets the new state).
- The retry event will be handled after a backoff delay. This delay
increases with every attempt.
- If the configured amount of attempts is reached or the message expired
(based on config), a cancel event is created, letting the workers know,
the notification must no longer be handled.
- In case of successful send, a sent event is created for the
notification aggregate and the existing "sent" events for the user /
session object is stored.
- The following is added to the defaults.yaml to allow configuration of
the notification workers:
```yaml
Notifications:
# The amount of workers processing the notification request events.
# If set to 0, no notification request events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
Workers: 1 # ZITADEL_NOTIFIACATIONS_WORKERS
# The amount of events a single worker will process in a run.
BulkLimit: 10 # ZITADEL_NOTIFIACATIONS_BULKLIMIT
# Time interval between scheduled notifications for request events
RequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_REQUEUEEVERY
# The amount of workers processing the notification retry events.
# If set to 0, no notification retry events will be handled. This can be useful when running in
# multi binary / pod setup and allowing only certain executables to process the events.
RetryWorkers: 1 # ZITADEL_NOTIFIACATIONS_RETRYWORKERS
# Time interval between scheduled notifications for retry events
RetryRequeueEvery: 2s # ZITADEL_NOTIFIACATIONS_RETRYREQUEUEEVERY
# Only instances are projected, for which at least a projection-relevant event exists within the timeframe
# from HandleActiveInstances duration in the past until the projection's current time
# If set to 0 (default), every instance is always considered active
HandleActiveInstances: 0s # ZITADEL_NOTIFIACATIONS_HANDLEACTIVEINSTANCES
# The maximum duration a transaction remains open
# before it spots left folding additional events
# and updates the table.
TransactionDuration: 1m # ZITADEL_NOTIFIACATIONS_TRANSACTIONDURATION
# Automatically cancel the notification after the amount of failed attempts
MaxAttempts: 3 # ZITADEL_NOTIFIACATIONS_MAXATTEMPTS
# Automatically cancel the notification if it cannot be handled within a specific time
MaxTtl: 5m # ZITADEL_NOTIFIACATIONS_MAXTTL
# Failed attempts are retried after a confogired delay (with exponential backoff).
# Set a minimum and maximum delay and a factor for the backoff
MinRetryDelay: 1s # ZITADEL_NOTIFIACATIONS_MINRETRYDELAY
MaxRetryDelay: 20s # ZITADEL_NOTIFIACATIONS_MAXRETRYDELAY
# Any factor below 1 will be set to 1
RetryDelayFactor: 1.5 # ZITADEL_NOTIFIACATIONS_RETRYDELAYFACTOR
```
# Additional Changes
None
# Additional Context
- closes#8931
# Which Problems Are Solved
OTP Email links currently could not use / include the sessionID they
belong to. This prevents an easy use for redirecting and handling OTP
via email through the session API.
# How the Problems Are Solved
Added the sessionID as placeholder for the OTP Email link template.
# Additional Changes
List all available placeholders in the url_templates of V2 endpoints.
# Additional Context
- discussed in a customer meeting
# Which Problems Are Solved
Twilio supports a robust, multi-channel verification service that
notably supports multi-region SMS sender numbers required for our use
case. Currently, Zitadel does much of the work of the Twilio Verify (eg.
localization, code generation, messaging) but doesn't support the pool
of sender numbers that Twilio Verify does.
# How the Problems Are Solved
To support this API, we need to be able to store the Twilio Service ID
and send that in a verification request where appropriate: phone number
verification and SMS 2FA code paths.
This PR does the following:
- Adds the ability to use Twilio Verify of standard messaging through
Twilio
- Adds support for international numbers and more reliable verification
messages sent from multiple numbers
- Adds a new Twilio configuration option to support Twilio Verify in the
admin console
- Sends verification SMS messages through Twilio Verify
- Implements Twilio Verification Checks for codes generated through the
same
# Additional Changes
# Additional Context
- base was implemented by @zhirschtritt in
https://github.com/zitadel/zitadel/pull/8268❤️
- closes https://github.com/zitadel/zitadel/issues/8581
---------
Co-authored-by: Zachary Hirschtritt <zachary.hirschtritt@klaviyo.com>
Co-authored-by: Joey Biscoglia <joey.biscoglia@klaviyo.com>
# Which Problems Are Solved
As an administrator I want to be able to invite users to my application
with the API V2, some user data I will already prefil, the user should
add the authentication method themself (password, passkey, sso).
# How the Problems Are Solved
- A user can now be created with a email explicitly set to false.
- If a user has no verified email and no authentication method, an
`InviteCode` can be created through the User V2 API.
- the code can be returned or sent through email
- additionally `URLTemplate` and an `ApplicatioName` can provided for
the email
- The code can be resent and verified through the User V2 API
- The V1 login allows users to verify and resend the code and set a
password (analog user initialization)
- The message text for the user invitation can be customized
# Additional Changes
- `verifyUserPasskeyCode` directly uses `crypto.VerifyCode` (instead of
`verifyEncryptedCode`)
- `verifyEncryptedCode` is removed (unnecessarily queried for the code
generator)
# Additional Context
- closes#8310
- TODO: login V2 will have to implement invite flow:
https://github.com/zitadel/typescript/issues/166
# Which Problems Are Solved
Send SMS messages as a HTTP call to a relay, for own logic on handling
different SMS providers.
# How the Problems Are Solved
Add HTTP as SMS provider type and handling of webhook messages in the
notification handlers.
# Additional Changes
Clean up old Twilio events, which were supposed to handle the general
SMS providers with deactivate, activate and remove.
# Additional Context
Partially closes#8270
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
ZITADEL currently selects the instance context based on a HTTP header
(see https://github.com/zitadel/zitadel/issues/8279#issue-2399959845 and
checks it against the list of instance domains. Let's call it instance
or API domain.
For any context based URL (e.g. OAuth, OIDC, SAML endpoints, links in
emails, ...) the requested domain (instance domain) will be used. Let's
call it the public domain.
In cases of proxied setups, all exposed domains (public domains) require
the domain to be managed as instance domain.
This can either be done using the "ExternalDomain" in the runtime config
or via system API, which requires a validation through CustomerPortal on
zitadel.cloud.
# How the Problems Are Solved
- Two new headers / header list are added:
- `InstanceHostHeaders`: an ordered list (first sent wins), which will
be used to match the instance.
(For backward compatibility: the `HTTP1HostHeader`, `HTTP2HostHeader`
and `forwarded`, `x-forwarded-for`, `x-forwarded-host` are checked
afterwards as well)
- `PublicHostHeaders`: an ordered list (first sent wins), which will be
used as public host / domain. This will be checked against a list of
trusted domains on the instance.
- The middleware intercepts all requests to the API and passes a
`DomainCtx` object with the hosts and protocol into the context
(previously only a computed `origin` was passed)
- HTTP / GRPC server do not longer try to match the headers to instances
themself, but use the passed `http.DomainContext` in their interceptors.
- The `RequestedHost` and `RequestedDomain` from authz.Instance are
removed in favor of the `http.DomainContext`
- When authenticating to or signing out from Console UI, the current
`http.DomainContext(ctx).Origin` (already checked by instance
interceptor for validity) is used to compute and dynamically add a
`redirect_uri` and `post_logout_redirect_uri`.
- Gateway passes all configured host headers (previously only did
`x-zitadel-*`)
- Admin API allows to manage trusted domain
# Additional Changes
None
# Additional Context
- part of #8279
- open topics:
- "single-instance" mode
- Console UI
* get key by id and cache them
* userinfo from events for v2 tokens
* improve keyset caching
* concurrent token and client checks
* client and project in single query
* logging and otel
* drop owner_removed column on apps and authN tables
* userinfo and project roles in go routines
* get oidc user info from projections and add actions
* add avatar URL
* some cleanup
* pull oidc work branch
* remove storage from server
* add config flag for experimental introspection
* legacy introspection flag
* drop owner_removed column on user projections
* drop owner_removed column on useer_metadata
* query userinfo unit test
* query introspection client test
* add user_grants to the userinfo query
* handle PAT scopes
* bring triggers back
* test instance keys query
* add userinfo unit tests
* unit test keys
* go mod tidy
* solve some bugs
* fix missing preferred login name
* do not run triggers in go routines, they seem to deadlock
* initialize the trigger handlers late with a sync.OnceValue
* Revert "do not run triggers in go routines, they seem to deadlock"
This reverts commit 2a03da2127.
* add missing translations
* chore: update go version for linting
* pin oidc version
* parse a global time location for query test
* fix linter complains
* upgrade go lint
* fix more linting issues
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
This implementation increases parallel write capabilities of the eventstore.
Please have a look at the technical advisories: [05](https://zitadel.com/docs/support/advisory/a10005) and [06](https://zitadel.com/docs/support/advisory/a10006).
The implementation of eventstore.push is rewritten and stored events are migrated to a new table `eventstore.events2`.
If you are using cockroach: make sure that the database user of ZITADEL has `VIEWACTIVITY` grant. This is used to query events.
* take baseurl if saved on event
* refactor: make es mocks reusable
* Revert "refactor: make es mocks reusable"
This reverts commit 434ce12a6a.
* make messages testable
* test asset url
* fmt
* fmt
* simplify notification.Start
* test url combinations
* support init code added
* support password changed
* support reset pw
* support user domain claimed
* support add pwless login
* support verify phone
* Revert "support verify phone"
This reverts commit e40503303e.
* save trigger origin from ctx
* add ready for review check
* camel
* test email otp
* fix variable naming
* fix DefaultOTPEmailURLV2
* Revert "fix DefaultOTPEmailURLV2"
This reverts commit fa34d4d2a8.
* fix email otp challenged test
* fix email otp challenged test
* pass origin in login and gateway requests
* take origin from header
* take x-forwarded if present
* Update internal/notification/handlers/queries.go
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* Update internal/notification/handlers/commands.go
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* move origin header to ctx if available
* generate
* cleanup
* use forwarded header
* support X-Forwarded-* headers
* standardize context handling
* fix linting
---------
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* feat: add otp (sms and email) checks in session api
* implement sending
* fix tests
* add tests
* add integration tests
* fix merge main and add tests
* put default OTP Email url into config
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* feat: add phone change and code verification for user v2 api
* feat: add phone change and code verification for user v2 api
* fix: add ignored phone.proto
* fix: integration tests
* Update proto/zitadel/user/v2alpha/user_service.proto
* Update idp_template.go
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
