# Which Problems Are Solved
As already mentioned and (partially) fixed in #7992 we discovered,
issues with v2 tokens that where obtained through an IDP, with
passwordless authentication or with password authentication (wihtout any
2FA set up) using the v1 login for zitadel API calls
- (Previous) authentication through an IdP is now correctly treated as
auth method in case of a reauth even when the user is not redirected to
the IdP
- There were some cases where passwordless authentication was
successfully checked but not correctly set as auth method, which denied
access to ZITADEL API
- Users with password and passwordless, but no 2FA set up which
authenticate just wich password can access the ZITADEL API again
Additionally while testing we found out that because of #7969 the login
UI could completely break / block with the following error:
`sql: Scan error on column index 3, name "state": converting NULL to
int32 is unsupported (Internal)`
# How the Problems Are Solved
- IdP checks are treated the same way as other factors and it's ensured
that a succeeded check within the configured timeframe will always
provide the idp auth method
- `MFATypesAllowed` checks for possible passwordless authentication
- As with the v1 login, the token check now only requires MFA if the
policy is set or the user has 2FA set up
- UserAuthMethodsRequirements now always uses the correctly policy to
check for MFA enforcement
- `State` column is handled as nullable and additional events set the
state to active (as before #7969)
# Additional Changes
- Console now also checks for 403 (mfa required) errors (e.g. after
setting up the first 2FA in console) and redirects the user to the login
UI (with the current id_token as id_token_hint)
- Possible duplicates in auth methods / AMRs are removed now as well.
# Additional Context
- Bugs were introduced in #7822 and # and 7969 and only part of a
pre-release.
- partially already fixed with #7992
- Reported internally.
# Which Problems Are Solved
After https://github.com/zitadel/zitadel/pull/7822 was merged we
discovered that
v2 tokens that where obtained through an IDP using the v1 login, can't
be used for
zitadel API calls.
- Because we used to store the AMR claim on the auth request, but
internally use the domain.UserAuthMethod type. AMR has no notion of an
IDP login, so that "factor" was lost
during conversion. Rendering those v2 tokens invalid on the zitadel API.
- A wrong check on machine user tokens falsly allowed some tokens to be
valid
- The client ID was set to tokens from client credentials and JWT
profile, which made client queries fail in the validation middleware.
The middleware expects client ID unset for machine users.
# How the Problems Are Solved
Store the domain.AuthMethods directly in the auth requests and session,
instead of using AMR claims with lossy conversion.
- IDPs have seperate auth method, which is not an AMR claim
- Machine users are treated specialy, eg auth methods are not required.
- Do not set the client ID for client credentials and JWT profile
# Additional Changes
Cleaned up mostly unused `oidc.getInfoFromRequest()`.
# Additional Context
- Bugs were introduced in https://github.com/zitadel/zitadel/pull/7822
and not yet part of a release.
- Reported internally.
* implement code exchange
* port tokenexchange to v2 tokens
* implement refresh token
* implement client credentials
* implement jwt profile
* implement device token
* cleanup unused code
* fix current unit tests
* add user agent unit test
* unit test domain package
* need refresh token as argument
* test commands create oidc session
* test commands device auth
* fix device auth build error
* implicit for oidc session API
* implement authorize callback handler for legacy implicit mode
* upgrade oidc module to working draft
* add missing auth methods and time
* handle all errors in defer
* do not fail auth request on error
the oauth2 Go client automagically retries on any error. If we fail the auth request on the first error, the next attempt will always fail with the Errors.AuthRequest.NoCode, because the auth request state is already set to failed.
The original error is then already lost and the oauth2 library does not return the original error.
Therefore we should not fail the auth request.
Might be worth discussing and perhaps send a bug report to Oauth2?
* fix code flow tests by explicitly setting code exchanged
* fix unit tests in command package
* return allowed scope from client credential client
* add device auth done reducer
* carry nonce thru session into ID token
* fix token exchange integration tests
* allow project role scope prefix in client credentials client
* gci formatting
* do not return refresh token in client credentials and jwt profile
* check org scope
* solve linting issue on authorize callback error
* end session based on v2 session ID
* use preferred language and user agent ID for v2 access tokens
* pin oidc v3.23.2
* add integration test for jwt profile and client credentials with org scopes
* refresh token v1 to v2
* add user token v2 audit event
* add activity trigger
* cleanup and set panics for unused methods
* use the encrypted code for v1 auth request get by code
* add missing event translation
* fix pipeline errors (hopefully)
* fix another test
* revert pointer usage of preferred language
* solve browser info panic in device auth
* remove duplicate entries in AMRToAuthMethodTypes to prevent future `mfa` claim
* revoke v1 refresh token to prevent reuse
* fix terminate oidc session
* always return a new refresh toke in refresh token grant
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
* add token exchange feature flag
* allow setting reason and actor to access tokens
* impersonation
* set token types and scopes in response
* upgrade oidc to working draft state
* fix tests
* audience and scope validation
* id toke and jwt as input
* return id tokens
* add grant type token exchange to app config
* add integration tests
* check and deny actors in api calls
* fix instance setting tests by triggering projection on write and cleanup
* insert sleep statements again
* solve linting issues
* add translations
* pin oidc v3.15.0
* resolve comments, add event translation
* fix refreshtoken test
* use ValidateAuthReqScopes from oidc
* apparently the linter can't make up its mind
* persist actor thru refresh tokens and check in tests
* remove unneeded triggers
* fix(authz): add logging to access token verification errors
Related to #6949
* use logging fields
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
* get key by id and cache them
* userinfo from events for v2 tokens
* improve keyset caching
* concurrent token and client checks
* client and project in single query
* logging and otel
* drop owner_removed column on apps and authN tables
* userinfo and project roles in go routines
* get oidc user info from projections and add actions
* add avatar URL
* some cleanup
* pull oidc work branch
* remove storage from server
* add config flag for experimental introspection
* legacy introspection flag
* drop owner_removed column on user projections
* drop owner_removed column on useer_metadata
* query userinfo unit test
* query introspection client test
* add user_grants to the userinfo query
* handle PAT scopes
* bring triggers back
* test instance keys query
* add userinfo unit tests
* unit test keys
* go mod tidy
* solve some bugs
* fix missing preferred login name
* do not run triggers in go routines, they seem to deadlock
* initialize the trigger handlers late with a sync.OnceValue
* Revert "do not run triggers in go routines, they seem to deadlock"
This reverts commit 2a03da2127.
* add missing translations
* chore: update go version for linting
* pin oidc version
* parse a global time location for query test
* fix linter complains
* upgrade go lint
* fix more linting issues
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* define roles and permissions
* support system user memberships
* don't limit system users
* cleanup permissions
* restrict memberships to aggregates
* default to SYSTEM_OWNER
* update unit tests
* test: system user token test (#6778)
* update unit tests
* refactor: make authz testable
* move session constants
* cleanup
* comment
* comment
* decode member type string to enum (#6780)
* decode member type string to enum
* handle all membership types
* decode enums where necessary
* decode member type in steps config
* update system api docs
* add technical advisory
* tweak docs a bit
* comment in comment
* lint
* extract token from Bearer header prefix
* review changes
* fix tests
* fix: add fix for activityhandler
* add isSystemUser
* remove IsSystemUser from activity info
* fix: add fix for activityhandler
---------
Co-authored-by: Stefan Benz <stefan@caos.ch>
This implementation increases parallel write capabilities of the eventstore.
Please have a look at the technical advisories: [05](https://zitadel.com/docs/support/advisory/a10005) and [06](https://zitadel.com/docs/support/advisory/a10006).
The implementation of eventstore.push is rewritten and stored events are migrated to a new table `eventstore.events2`.
If you are using cockroach: make sure that the database user of ZITADEL has `VIEWACTIVITY` grant. This is used to query events.
* feat: add otp (sms and email) checks in session api
* implement sending
* fix tests
* add tests
* add integration tests
* fix merge main and add tests
* put default OTP Email url into config
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* fix: tests
* bastle wie en grosse
* fix(database): scan as callback
* fix tests
* fix merge failures
* remove as of system time
* refactor: remove unused test
* refacotr: remove unused lines
This PR adds an option to the LoginPolicy to "Force MFA for local users", so that users authenticated through an IDP must not configure (and verify) an MFA.
This PR adds support for userinfo and introspection of V2 tokens. Further V2 access tokens and session tokens can be used for authentication on the ZITADEL API (like the current access tokens).
* chore(proto): update versions
* change protoc plugin
* some cleanups
* define api for setting emails in new api
* implement user.SetEmail
* move SetEmail buisiness logic into command
* resuse newCryptoCode
* command: add ChangeEmail unit tests
Not complete, was not able to mock the generator.
* Revert "resuse newCryptoCode"
This reverts commit c89e90ae35.
* undo change to crypto code generators
* command: use a generator so we can test properly
* command: reorganise ChangeEmail
improve test coverage
* implement VerifyEmail
including unit tests
* add URL template tests
* proto: change context to object
* remove old auth option
* remove old auth option
* fix linting errors
run gci on modified files
* add permission checks and fix some errors
* comments
* comments
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
Co-authored-by: Tim Möhlmann <tim+github@zitadel.com>
* feat(command): remove org
* refactor: imports, unused code, error handling
* reduce org removed in action
* add org deletion to projections
* add org removal to projections
* add org removal to projections
* org removed projection
* lint import
* projections
* fix: table names in tests
* fix: table names in tests
* logging
* add org state
* fix(domain): add Owner removed to object details
* feat(ListQuery): add with owner removed
* fix(org-delete): add bool to functions to select with owner removed
* fix(org-delete): add bools to user grants with events to determine if dependencies lost owner
* fix(org-delete): add unit tests for owner removed and org removed events
* fix(org-delete): add handling of org remove for grants and members
* fix(org-delete): correction of unit tests for owner removed
* fix(org-delete): update projections, unit tests and get functions
* fix(org-delete): add change date to authnkeys and owner removed to org metadata
* fix(org-delete): include owner removed for login names
* fix(org-delete): some column fixes in projections and build for queries with owner removed
* indexes
* fix(org-delete): include review changes
* fix(org-delete): change user projection name after merge
* fix(org-delete): include review changes for project grant where no project owner is necessary
* fix(org-delete): include auth and adminapi tables with owner removed information
* fix(org-delete): cleanup username and orgdomain uniqueconstraints when org is removed
* fix(org-delete): add permissions for org.remove
* remove unnecessary unique constraints
* fix column order in primary keys
* fix(org-delete): include review changes
* fix(org-delete): add owner removed indexes and chang setup step to create tables
* fix(org-delete): move PK order of instance_id and change added user_grant from review
* fix(org-delete): no params for prepareUserQuery
* change to step 6
* merge main
* fix(org-delete): OldUserName rename to private
* fix linting
* cleanup
* fix: remove org test
* create prerelease
* chore: delete org-delete as prerelease
Co-authored-by: Stefan Benz <stefan@caos.ch>
Co-authored-by: Livio Spring <livio.a@gmail.com>
Co-authored-by: Fabi <38692350+hifabienne@users.noreply.github.com>
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* fix: reduce load on view tables
* create prerelease
* linting: pass context to view handlers
* fix error handling of refresh token handler
* fix: improve processing of successful instanceIDs on views
* fix revert intended change in .golangci.yaml
* fix: set timeout for processInstances in spooler
* fix: reduce update to active tokens on profile change
* change token expiration query to db now()
* remove branch from .releaserc.js
## Note
This release requires a setup step to fully improve performance.
Be sure to start ZITADEL with an appropriate command (zitadel start-from-init / start-from-setup)
## Changes
- fix: only run projection scheduler on active instances
- fix: set default for concurrent instances of projections to 1 (for scheduling)
- fix: create more indexes on eventstore.events table
- fix: get current sequence for token check (improve reread performance)
* feat: Configurable Unique Machine Identification
This change fixes Segfault on AWS App Runner with v2 #3625
The change introduces two new dependencies:
* github.com/drone/envsubst for supporting AWS ECS, which has its metadata endpoint described by an environment variable
* github.com/jarcoal/jpath so that only relevant data from a metadata response is used to identify the machine.
The change ads new configuration (see `defaults.yaml`):
* `Machine.Identification` enables configuration of how machines are uniquely identified - I'm not sure about the top level category `Machine`, as I don't have anything else to add to it. Happy to hear suggestions for better naming or structure here.
* `Machine.Identifiation.PrivateId` turns on or off the existing private IP based identification. Default is on.
* `Machine.Identification.Hostname` turns on or off using the OS hostname to identify the machine. Great for most cloud environments, where this tends to be set to something that identifies the machine uniquely. Enabled by default.
* `Machine.Identification.Webhook` configures identification based on the response to an HTTP GET request. Request headers can be configured, a JSONPath can be set for processing the response (no JSON parsing is done if this is not set), and the URL is allowed to contain environment variables in the format `"${var}"`.
The new flow for getting a unique machine id is:
1. PrivateIP (if enabled)
2. Hostname (if enabled)
3. Webhook (if enabled, to configured URL)
4. Give up and error out.
It's important that init configures machine identity first. Otherwise we could try to get an ID before configuring it. To prevent this from causing difficult to debug issues, where for example the default configuration was used, I've ensured that
the application will generate an error if the module hasn't been configured and you try to get an ID.
Misc changes:
* Spelling and gramatical corrections to `init.go::New()` long description.
* Spelling corrections to `verify_zitadel.go::newZitadel()`.
* Updated `production.md` and `development.md` based on the new build process. I think the run instructions are also out of date, but I'll leave that for someone else.
* `id.SonyFlakeGenerator` is now a function, which sets `id.sonyFlakeGenerator`, this allows us to defer initialization until configuration has been read.
* Update internal/id/config.go
Co-authored-by: Alexei-Barnes <82444470+Alexei-Barnes@users.noreply.github.com>
* Fix authored by @livio-a for tests
Co-authored-by: Livio Amstutz <livio.a@gmail.com>
