# Which Problems Are Solved
A customer noted that after upgrade to 2.53.0, users were no longer able
to reset their passwords through the login UI.
This was due to a accidental change in
https://github.com/zitadel/zitadel/pull/7969
# How the Problems Are Solved
The `preferred_login_name` is now correctly read from the database.
# Additional Changes
None.
# Additional Context
relates to #7969
# Which Problems Are Solved
As already mentioned and (partially) fixed in #7992 we discovered,
issues with v2 tokens that where obtained through an IDP, with
passwordless authentication or with password authentication (wihtout any
2FA set up) using the v1 login for zitadel API calls
- (Previous) authentication through an IdP is now correctly treated as
auth method in case of a reauth even when the user is not redirected to
the IdP
- There were some cases where passwordless authentication was
successfully checked but not correctly set as auth method, which denied
access to ZITADEL API
- Users with password and passwordless, but no 2FA set up which
authenticate just wich password can access the ZITADEL API again
Additionally while testing we found out that because of #7969 the login
UI could completely break / block with the following error:
`sql: Scan error on column index 3, name "state": converting NULL to
int32 is unsupported (Internal)`
# How the Problems Are Solved
- IdP checks are treated the same way as other factors and it's ensured
that a succeeded check within the configured timeframe will always
provide the idp auth method
- `MFATypesAllowed` checks for possible passwordless authentication
- As with the v1 login, the token check now only requires MFA if the
policy is set or the user has 2FA set up
- UserAuthMethodsRequirements now always uses the correctly policy to
check for MFA enforcement
- `State` column is handled as nullable and additional events set the
state to active (as before #7969)
# Additional Changes
- Console now also checks for 403 (mfa required) errors (e.g. after
setting up the first 2FA in console) and redirects the user to the login
UI (with the current id_token as id_token_hint)
- Possible duplicates in auth methods / AMRs are removed now as well.
# Additional Context
- Bugs were introduced in #7822 and # and 7969 and only part of a
pre-release.
- partially already fixed with #7992
- Reported internally.
# Which Problems Are Solved
Queriying events by an aggregate id can produce high loads on the
database if the aggregate id contains many events (count > 1000000).
# How the Problems Are Solved
Instead of using the postion and in_tx_order columns we use the sequence
column which guarantees correct ordering in a single aggregate and uses
more optimised indexes.
# Additional Context
Closes https://github.com/zitadel/DevOps/issues/50
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
Potential nil pointers leading to a panic in the login UI.
# How the Problems Are Solved
As of now the login UI did not always check if the authRequest was
actually retrieved form the database, which is ok for some endpoints
which can also be called outside of an auth request.
There are now methods added to ensure the request is loaded.
# Additional Changes
None
# Additional Context
Closes https://github.com/zitadel/DevOps/issues/55
# Which Problems Are Solved
Curretly loading targets fails on cockraochdb because the order of
`with`-statements is wrong.
# How the Problems Are Solved
Changed the order of queries in the statements.
If the feature is enabled the new packages are used to query org by id
Part of: https://github.com/zitadel/zitadel/issues/7639
### Definition of Ready
- [x] I am happy with the code
- [x] Short description of the feature/issue is added in the pr
description
- [x] PR is linked to the corresponding user story
- [ ] Acceptance criteria are met
- [ ] All open todos and follow ups are defined in a new ticket and
justified
- [ ] Deviations from the acceptance criteria and design are agreed with
the PO and documented.
- [x] No debug or dead code
- [x] My code has no repetitions
- [ ] Critical parts are tested automatically
- [ ] Where possible E2E tests are implemented
- [ ] Documentation/examples are up-to-date
- [ ] All non-functional requirements are met
- [x] Functionality of the acceptance criteria is checked manually on
the dev system.
# Which Problems Are Solved
Currently on instance setup there is only a possibility to either use a
human or a machine user and not both at creation.
# How the Problems Are Solved
The logic in the instance setup is refactored and changed so there is
not an exclusion.
# Additional Changes
Refactoring, so that unit testing is possible to add for the different
elements of an instance setup.
# Additional Context
Closes#6430
# Which Problems Are Solved
There is confusing ambiguity in the error messages for setting too long
passwords in different places.
# How the Problems Are Solved
A check for maximum password length is added so it's clear that
passwords can't exceed a maximum length of 70 or 72 bytes.
Password validation now provides a live updating check mark or cross
mark to indicate if the maximum length requirement is met.
# Additional Changes
Clarified requirement descriptions on the registration page with
complete sentences.
# Additional Context
Closes#6301
---------
Co-authored-by: Elio Bischof <elio@zitadel.com>
# Which Problems Are Solved
After https://github.com/zitadel/zitadel/pull/7822 was merged we
discovered that
v2 tokens that where obtained through an IDP using the v1 login, can't
be used for
zitadel API calls.
- Because we used to store the AMR claim on the auth request, but
internally use the domain.UserAuthMethod type. AMR has no notion of an
IDP login, so that "factor" was lost
during conversion. Rendering those v2 tokens invalid on the zitadel API.
- A wrong check on machine user tokens falsly allowed some tokens to be
valid
- The client ID was set to tokens from client credentials and JWT
profile, which made client queries fail in the validation middleware.
The middleware expects client ID unset for machine users.
# How the Problems Are Solved
Store the domain.AuthMethods directly in the auth requests and session,
instead of using AMR claims with lossy conversion.
- IDPs have seperate auth method, which is not an AMR claim
- Machine users are treated specialy, eg auth methods are not required.
- Do not set the client ID for client credentials and JWT profile
# Additional Changes
Cleaned up mostly unused `oidc.getInfoFromRequest()`.
# Additional Context
- Bugs were introduced in https://github.com/zitadel/zitadel/pull/7822
and not yet part of a release.
- Reported internally.
# Which Problems Are Solved
ZITADEL currently always uses
`urn:oasis:names:tc:SAML:2.0:nameid-format:persistent` in SAML requests,
relying on the IdP to respect that flag and always return a peristent
nameid in order to be able to map the external user with an existing
user (idp link) in ZITADEL.
In case the IdP however returns a
`urn:oasis:names:tc:SAML:2.0:nameid-format:transient` (transient)
nameid, the attribute will differ between each request and it will not
be possible to match existing users.
# How the Problems Are Solved
This PR adds the following two options on SAML IdP:
- **nameIDFormat**: allows to set the nameid-format used in the SAML
Request
- **transientMappingAttributeName**: allows to set an attribute name,
which will be used instead of the nameid itself in case the returned
nameid-format is transient
# Additional Changes
To reduce impact on current installations, the `idp_templates6_saml`
table is altered with the two added columns by a setup job. New
installations will automatically get the table with the two columns
directly.
All idp unit tests are updated to use `expectEventstore` instead of the
deprecated `eventstoreExpect`.
# Additional Context
Closes#7483Closes#7743
---------
Co-authored-by: peintnermax <max@caos.ch>
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
Add a check for circular includes in action v2 executions, so that no
self-includes or infinite loops can happen.
Closes#7445
### Definition of Ready
- [x] I am happy with the code
- [x] Short description of the feature/issue is added in the pr
description
- [x] PR is linked to the corresponding user story
- [x] Acceptance criteria are met
- [x] All open todos and follow ups are defined in a new ticket and
justified
- [x] Deviations from the acceptance criteria and design are agreed with
the PO and documented.
- [x] No debug or dead code
- [x] My code has no repetitions
- [x] Critical parts are tested automatically
- [x] Where possible E2E tests are implemented
- [x] Documentation/examples are up-to-date
- [x] All non-functional requirements are met
- [x] Functionality of the acceptance criteria is checked manually on
the dev system.
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
# Which Problems Are Solved
During the implementation of #7486 it was noticed, that projections in
the `auth` database schema could be blocked.
Investigations suggested, that this is due to the use of
[GORM](https://gorm.io/index.html) and it's inability to use an existing
(sql) transaction.
With the improved / simplified handling (see below) there should also be
a minimal improvement in performance, resp. reduced database update
statements.
# How the Problems Are Solved
The handlers in `auth` are exchanged to proper (sql) statements and gorm
usage is removed for any writing part.
To further improve / simplify the handling of the users, a new
`auth.users3` table is created, where only attributes are handled, which
are not yet available from the `projections.users`,
`projections.login_name` and `projections.user_auth_methods` do not
provide. This reduces the events handled in that specific handler by a
lot.
# Additional Changes
None
# Additional Context
relates to #7486
# Which Problems Are Solved
- In #7929 it was detected that it would be better to show the
activate/deactivate action for a SMTP configuration in the wizard as for
some users it'd not be intuitive that the SMTP provider must be
activated so Zitadel can use it to send notifications.
# How the Problems Are Solved
- When a new SMTP provider is added or updated, the wizard has a new
step that allow us to activate or deactivate the provider configured in
the previous step. The following video shows the new wizard:
https://github.com/zitadel/zitadel/assets/30386061/178234d6-73dc-4719-af0b-1d6f19bf3f7d
# Additional Context
- Closes#7929
# Which Problems Are Solved
The session update requires the current session token as argument.
Since this adds extra complexity but no real additional security and
prevents case like magic links, we want to remove this requirement.
We still require the session token on other resouces / endpoints, e.g.
for finalizing the auth request or on idp intents.
# How the Problems Are Solved
- Removed the session token verifier in the Update Session GRPc call.
- Removed the session token from login UI examples session update calls
# Additional Changes
- none
# Additional Context
- Closes#7883
# Which Problems Are Solved
When poviding `select_account` in an OIDC auth request, ZITADEL would
always show the account selection page even if there aren't any user
sessions to choose and the user would then need to click the `Other
User` button to be presented the login page.
# How the Problems Are Solved
This PR changes the behavior and ignores the `select_account` prompt in
case there aren't any existing user sessions and will directly present
the login page.
# Additional Changes
None
# Additional Context
Closes#7213
* implement code exchange
* port tokenexchange to v2 tokens
* implement refresh token
* implement client credentials
* implement jwt profile
* implement device token
* cleanup unused code
* fix current unit tests
* add user agent unit test
* unit test domain package
* need refresh token as argument
* test commands create oidc session
* test commands device auth
* fix device auth build error
* implicit for oidc session API
* implement authorize callback handler for legacy implicit mode
* upgrade oidc module to working draft
* add missing auth methods and time
* handle all errors in defer
* do not fail auth request on error
the oauth2 Go client automagically retries on any error. If we fail the auth request on the first error, the next attempt will always fail with the Errors.AuthRequest.NoCode, because the auth request state is already set to failed.
The original error is then already lost and the oauth2 library does not return the original error.
Therefore we should not fail the auth request.
Might be worth discussing and perhaps send a bug report to Oauth2?
* fix code flow tests by explicitly setting code exchanged
* fix unit tests in command package
* return allowed scope from client credential client
* add device auth done reducer
* carry nonce thru session into ID token
* fix token exchange integration tests
* allow project role scope prefix in client credentials client
* gci formatting
* do not return refresh token in client credentials and jwt profile
* check org scope
* solve linting issue on authorize callback error
* end session based on v2 session ID
* use preferred language and user agent ID for v2 access tokens
* pin oidc v3.23.2
* add integration test for jwt profile and client credentials with org scopes
* refresh token v1 to v2
* add user token v2 audit event
* add activity trigger
* cleanup and set panics for unused methods
* use the encrypted code for v1 auth request get by code
* add missing event translation
* fix pipeline errors (hopefully)
* fix another test
* revert pointer usage of preferred language
* solve browser info panic in device auth
* remove duplicate entries in AMRToAuthMethodTypes to prevent future `mfa` claim
* revoke v1 refresh token to prevent reuse
* fix terminate oidc session
* always return a new refresh toke in refresh token grant
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
* fix: import totp in add human user with secret
* fix: import totp in add human user with secret
* fix: import totp in add human user with secret
* fix: review comment changes
* fix: correct resourceowner of intent to instance
* fix: correct resourceowner of intent to instance
* fix: correct resourceowner of intent to instance
* fix: correct resourceowner of intent to instance
* fix: correct resourceowner of intent to instance
* docs: expand the login example with org specific parameters
* fix: existence of idp is not checked through resourceowner
* fix: existence of idp is not checked through resourceowner
* fix: existence of idp is not checked through resourceowner
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
* fix: check password complexity policy on password change and respect require_change
* pass changeRequired where available and add tests
* fix requested changes
---------
Co-authored-by: Stefan Benz <46600784+stebenz@users.noreply.github.com>
* fix: poc outlook.com now works login auth
* fix: remove port arg from smtpAuth
* fix: add outlook provider and custom email placeholder
* fix: minor typo in contributing docs
* fix: use zerrors package
* fix: typo for idp and smtp providers
---------
Co-authored-by: Max Peintner <max@caos.ch>
* docs: translate missing event types
* fix: wrong example in api docs
* Update internal/static/i18n/cs.yaml
Co-authored-by: Livio Spring <livio.a@gmail.com>
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
* Allow using a local RSA key for machine keys
* Add check for key validity
* Fix naming error
* docs: provide translations of invalid key
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>
We are trying to reproduce a few 500 responses we observe on zitadel cloud's token endpoint.
As in the past these were caused by wrongly encoded or encrypted refresh tokens, I created a integration test which tries to reproduce 500 errors by sending invalid refresh tokens.
The added test does not reproduce 500s, all returned errors are in the 400 range as they should. However, as the test is already written, we might as well include them.
Related to #7765
Co-authored-by: Livio Spring <livio.a@gmail.com>
* fix(oidc): roles in userinfo for client credentials token
When tokens were obtained using the client credentials grant,
with audience and role scopes, userinfo would not return the role claims. This had multiple causes:
1. There is no auth request flow, so for legacy userinfo project data was never attached to the token
2. For optimized userinfo, there is no client ID that maps to an application. The client ID for client credentials is the machine user's name. There we can't obtain a project ID. When the project ID remained empty, we always ignored the roleAudience.
This PR fixes situation 2, by always taking the roleAudience into account, even when the projectID is empty. The code responsible for the bug is also refactored to be more readable and understandable, including additional godoc.
The fix only applies to the optimized userinfo code introduced in #7706 and released in v2.50 (currently in RC). Therefore it can't be back-ported to earlier versions.
Fixes#6662
* chore(deps): update all go deps (#7764)
This change updates all go modules, including oidc, a major version of go-jose and the go 1.22 release.
* Revert "chore(deps): update all go deps" (#7772)
Revert "chore(deps): update all go deps (#7764)"
This reverts commit 6893e7d060.
---------
Co-authored-by: Livio Spring <livio.a@gmail.com>