1
0
mirror of https://github.com/topjohnwu/Magisk.git synced 2024-12-23 08:27:40 +00:00
2019-09-19 05:00:29 -04:00

7.4 KiB

Magisk Details

File Structure

Paths in "sbin tmpfs overlay"

One of Magisk's breakthrough designs is sbin tmpfs overlay. It is required to support system-as-root devices, and also is the key to hiding Magisk from detection. All Magisk binaries, applets, mirrors, and other trivial stuffs are all located in the tmpfs mounted on /sbin. MagiskHide can just simply unmount /sbin and the bind mounts to hide all modifications easily.

# Binaries like magisk, magiskinit, and all symlinks to
# applets are directly stored in /sbin, so they
# are all in PATH for apps and shell to access them

# Magisk internal stuffs
MAGISKTMP=/sbin/.magisk

# Magisk BusyBox path
BBPATH=$MAGISKTMP/busybox

# /data/adb/modules will be bind mounted here
$MAGISKTMP/modules

# The configuration used in last installation
$MAGISKTMP/config

# Partition mirrors.
# There would be system, vendor, data, and possibly product
# in this directory, each is the mirror to the name of the partition
$MAGISKTMP/mirror

# Root directory patch files
# On system-as-root devices, / is not writable.
# All patched files are stored here and bind mounted at boot.
$MAGISKTMP/rootdir

# The patched sepolicy file on system-as-root devices.
# This is required as /sepolicy does not exist
# on those devices and / is not writable.
/sbin/.se

Paths in /data

Some binaries and files should be stored on non-volatile storages in /data. In order to prevent detection, everything has to be stored somewhere safe and undetectable in /data. The folder /data/adb was chosen because of the following advantages:

  • It is an existing folder on modern Android, so it cannot be used as an indication of the existence of Magisk.
  • The permission of the folder is by default 700, owner as root, so non-root processes are unable to enter, read, write the folder in any possible way.
  • The folder is labeled with secontext u:object_r:adb_data_file:s0, and very few processes have the permission to do any interaction with that secontext.
  • The folder is located in Device encrypted storage, so it is accessible as soon as data is properly mounted in FBE (File-Based Encryption) devices.
SECURE_DIR=/data/adb

# Folder storing general post-fs-data scripts
$SECURE_DIR/post-fs-data.d

# Folder storing general late_start service scripts
$SECURE_DIR/service.d

# Magisk modules
$SECURE_DIR/modules

# Magisk modules that are pending for upgrade
# Module files are not safe to be modified when mounted
# Modules installed in Magisk Manager will be stored here
# and will be merged into $SECURE_DIR/modules in the next reboot
$SECURE_DIR/modules_update

# Database storing settings and root permissions
MAGISKDB=$SECURE_DIR/magisk.db

# All magisk related binaries, containing busybox,
# scripts, and magisk binaries. Used in supporting
# module installation, addon.d, Magisk Manager etc.
# This folder will be bind mounted to $BINMIRROR
DATABIN=$SECURE_DIR/magisk

Magisk Booting Process

Pre-Init

magiskinit will replace init as the first program to run.

  • Early mount required partitions. On system-as-root devices, we will switch root to system
  • Inject magisk services into init.rc
  • Load sepolicy either from /sepolicy, precompiled sepolicy in vendor, or compile split sepolicy
  • Patch sepolicy rules and dump to /sepolicy or /sbin/.se and patch init or libselinux.so to load the patched policies
  • Execute the original init to start the ordinary boot process

post-fs-data

This triggers on post-fs-data when /data is properly decrypted (if required) and mounted. The daemon magiskd will be launched, post-fs-data scripts are executed, and module files are magic mounted.

late_start

Later in the booting process, the class late_start will be triggered, and Magisk "service" mode will be started. In this mode, service scripts are executed, and it will try to install Magisk Manager if it doesn't exist.

Resetprop

Usually, system properties are designed to only be updated by init and read-only to non-root processes. With root you can change properties by sending requests to property_service (hosted by init) using commands such as setprop, but changing read-only props (props that start with ro. like ro.build.product) and deleting properties are still prohibited.

resetprop is implemented by distilling out the source code related to system properties from AOSP and patched to allow direct modification to property area, or prop_area, bypassing the need to go through property_service. Since we are bypassing property_service, there are a few caveats:

  • on property:foo=bar actions registered in *.rc scripts will not be triggered if property changes does not go through property_service. The default set property behavior of resetprop matches setprop, which WILL trigger events (implemented by first deleting the property then set it via property_service). There is a flag -n to disable it if you need this special behavior.
  • persist properties (props that starts with persist., like persist.sys.usb.config) are stored in both prop_area and /data/property. By default, deleting props will NOT remove it from persistent storage, meaning the property will be restored after the next reboot; reading props will NOT read from persistent storage, as this is the behavior of getprop. With the flag -p, deleting props will remove the prop in BOTH prop_area and /data/property, and reading props will be read from BOTH prop_area and persistent storage.

Magic Mount

I will skip the details in the actual implementation and algorithm of Magic Mount, but you can always directly dive into the source code if interested. (bootstages.cpp)

Even though the mounting logic is pretty complicated, the final result of Magic Mount is actually pretty simple. For each module, the folder $MODPATH/system will be recursively merged into the real /system; that is: existing files in the real system will be replaced by the one in modules' system, and new files in modules' system will be added to the real system.

There is one additional trick you can use: if you place an empty file named .replace in any of the folders in a module's system, instead of merging the contents, that folder will directly replace the one in the real system. This will be very handy in some cases, for example swapping out a system app.

If you want to replace files in /vendor or /product, please place them under $MODPATH/system/vendor or $MODPATH/system/product. Magisk will transparently handle both cases, whether vendor or product is a separate partition or not.

Miscellaneous

Here are some tidbits in Magisk but unable to be categorized into any sections:

  • Socket name randomization: when you call su, magiskhide, and some commands in magisk, it connects to the magisk daemon magiskd running in the background. The connections are established through an abstract Unix socket. Any process can go through all active Unix sockets and see if the specifc name used by Magisk is in the list to determine whether magiskd is running. Starting from v15.4, the abstract name used in magiskd and magisklogd are randomized by magiskinit on each boot.
  • Sevice name randomization: each service started up by init will be recorded. Some apps will detect the name of magisk boot services to determine whether Magisk is installed. Starting from v17.2, the service name assigned in init.magisk.rc is randomized by magiskinit.